深孔钻机水刹车传动机构的设计改进

针对深孔钻机水刹车传动机构原设计结构中存在的问题进行分析、研究、并对机构进行了改进，满足了钻机绞车的各项性能指标和技术要求。     

轧机主传动万向联轴器辊端接头结构探讨

分析了衬板槽平面与叉头十字轴孔轴线的相对位置对辊端接头应力的影响 ,研究了轧辊扁头与衬板之间间隙所产生的冲击和应力集中 ,讨论了辊端接头中部过渡段结构对应力分布和制造质量的影响。提出辊端接头结构设计的优化方案     

油气集输管道最佳敷设方式的分析

根据大庆油田油气集输工艺设计的实践，分析了几种实用的油气集输管道敷设方式的优缺点。在对不同敷设方式的管道热耗做了较详细计算的基础上，进行了比较，提出了确定油气集输管道的最佳敷设方式：站外管道基本上采用埋地敷设；站内管道则应依据站址处的常年最高地下水位资料来确定，即在保证管道不长期受地下水浸泡的前提下，站内室外管道以埋地敷设为主，室内管道以架空与理地同时敷设为最佳；地下水位高的站内，以架空敷设最佳。     

铸造Ti—0.2Pd合金SF—1000双级风机叶轮的研制

Ｔｉ－０．２Ｐｄ合金ＳＦ－１０００双级风机叶轮是大型盐酸再生设备的主要部件，采用整体铸造方法制造，无论在技术上还是经济上都是十分有利的。本文主要介绍采用加工石墨，铸铁组合型，真空电弧凝壳熔炼铸造工艺，成功地研制出整体铸造风机叶轮。     

镀锌测厚仪

本文叙述了Ｘ射线荧光测厚仪的原理、特点及测量头的设计考虑原则。并以我们研制的两种镀锌测得仪为例作了详细说明。     

薄膜磁头磁轭制备工艺研究

本文重点讨论了用不同的工艺方法来制备薄膜磁头中的关键元件-磁轭。采用多次光刻的方法克服湿法工艺中磁性膜NiFe层的侧向钻蚀问题，从而实现对磁轭几何尺寸的精确控制，并对几种工艺方法的优缺点作了比较详细的分析。     

异形柱柱头混凝土连续托梁分次置换技术

通过某工程异形柱头混凝土置换实例,介绍了连续托梁分次置换技术的设计计算、施工方法和技术措施等。     

Sunflower Head Residue Pectin Extraction as Affected by Physical Conditions

Effects of extraction pH, temperature, and time on yield and quality of pectin from sunflower heads (Interstate cultivar) were investigated. The low-methoxyl pectin was extracted, using 0.75% sodium hexametaphosphate at pH 3, 4, and 5 and at 75, 85, and 95°for 20, 40, and 60 min, respectively. Yield, molecular mass, and firmness of jellies of the pectins were determined. Three-way statistical analysis on yield, molecular mass and gel firmness showed strong interactions among pH, temperature and time. Highest yields were obtained at pH 5, 95°for 20 min and pH 4, 85°for 40 min. Pectin extracted for 40 min at pH 3 and 4 and at 85°and 75°C, respectively, had the highest molecular mass. Gel firmness of sunflower pectin prepared at pH 5.4 was higher than that of a commercial citrus pectin.     

南水北调中线总干渠水头优化分配

南水北调中线总干渠渠道线路长,建筑物数量大、类型多,进行水头优化分配对于节省工程投资,合理的进行总干渠工程布置有着重要的意义.通过优化计算,提出了总干渠水头优化分配方案,确定了3个渠段之间的水头分配值以及各段内分段渠道和各个建筑物的水头分配值,并对方案进行了验证.     

Effects of circumferential pick spacing on boom type roadheader cutting head performance

Effects of equal and unequal circumferential pick spacing on the performance of boom type roadheaders having cylindrical cutting heads are investigated. For this purpose, two experimental cutting heads with equal and unequal circumferential spacing are designed and manufactured. The cutting head with unequal circumferential spacing is specifically designed to prevent tool-holder overlap at the nose section. Manufacturing difficulties associated with equal circumferential pick spacing due to tool-holder overlap are discussed with solid modeling and practical applications. The heads are tested at Park Cayirhan Coal Mine in Turkey and their cutting performances are analysed. Although better cutting performance for equal circumferential spacing are predicted by force–balance analysis, in situ measurements of instantaneous (net) traversing speed and cutting rate, pick consumption rate and machine vibration show that no significant difference exists between the performances of the two cutting heads.