Coal liquefaction using a hydrogenated creosote oil solvent: H-atom transfer from hydrogen donor components in the solvent

The presence of hydroaromatic, hydrogen donor components in a coal-derived solvent is one of the more important factors in the successful operation of a non-catalytic coal liquefaction process. Various hydrogen donor species present in a hydrogenated creosote oil have been identified. Their rate of disappearance under conditions that are consistent with a short residence time coal liquefaction process has been used to rank the reactivities of the various hydrogen donors. 1,2,3,10b-Tetrahydrofluoranthene was found to be an exceptional donor while 4,5-dihydropyrene, the hexahydropyrenes and 9,10-dihydrophenanthrene were found to be quite active. Sym.-octahydrophenanthrene and 2a,3,4,5-tetrahydroacenaphthene exhibited moderate activity. Tetralin and the four methyltetralin isomers were found to be unreactive under the coal liquefaction conditions employed.     

Effect of bismuth replacement at barium site in Y-Ba-Cu-O system

X-ray diffraction, electron paramagnetic resonance, microwave absorption and resistivity measurements were carried out on YBa_2−x Bi _x Cu₃O₇ (0≤x≤0·5) superconductors in order to study the effect of bismuth on the structural and superconducting properties. A decrease in sintering temperature increased the amount of impurity phase. Transition from an orthorhombic (superconducting) phase to tetragonal structure produced no significant change in EPR zero-field signal at liquid nitrogen temperature (LNT). The non-resonance signal height decreased on higher concentration of bismuth. Sintered YBa_2−x Bi _x Cu₃O₇ superconductor had a strong EPR zero-field signal at LNT. We have evaluated particle size from XRD and EPR studies. The average particle size was about 0·4μm.     

电炉钢外来夹杂控制的研究

介绍了夹杂物的来源,包括内生夹杂和外来夹杂,着重于二次氧化产物、卷渣、内衬侵蚀.同时介绍了鄂钢电炉厂在冶炼和连铸过程中控制夹杂物的操作实践.     

含杂质流体的流量测量

结合工程实例.介绍了几种实用的含杂质流体的流量测量方案,供自动化仪表设计及维堆护人员参考。     

催化裂化干气回收乙烯用于制备环氧乙烷的研究

叙述了在YS型银催化剂作用下，利用催化裂化干气回收的乙烯制备环氧乙烷的实验研究。结果表明：在银催化剂上催化氧化生成环氧乙烷的过程中，使用回收的乙烯，催化剂的初选择性可达80％；在保持环氧乙烷时空产率不变，经过2000h催化剂稳定性试验后，选择性下降了3—4个百分点，反应温度上升约10℃，与用聚合级乙烯为原料进行比较，催化剂初选择性低2—3个百分点、稳定性略差。该结果为用回收乙烯生产环氧乙烷提供了试验依据。     

TiO_2压敏陶瓷晶粒半导化

本文主要研究 TiO_2陶瓷晶粒半导化的途径及晶粒电阻率的测试方法。实验结果表明,通过掺入Nb_2O_5施主杂质可以有效地降低晶粒电阻率,并使 TiO_2系陶瓷具有良好的压敏特性。     

Ziegler-Natta烯烃聚合催化剂进展

综述了Ziegler-Natta催化剂在乙烯聚合和丙烯聚合方面的研究开发现状，重点介绍了采用新型二醚化合物作为内给电子体的丙烯聚合催化剂的进展。随着合成树脂向功能化方向发展，开发综合性能优越的新型催化剂及给电子体将是今后的研究方向。     

高压热处理对氧沉淀低温形核的影响

研究了外加高压(1GPa)下对450℃热处理硅片中氧沉淀行为的影响.透射电镜观察表明相对于大气压下热处理的样品,高压处理的样品会产生密度更高、尺寸更小的氧沉淀,表明高压有利于小直径氧沉淀的生成.电学性能测试表明,高压下处理的样品其热施主生成浓度和生成速率远远高于常压下处理的样品,这表明热施主与低温热处理过程中生成的高浓度氧沉淀核心有密切的关系.     

杂质元素对金属镝压缩强度的影响

研究了金属镝中所含Ｓｉ、Ｃａ、Ｆｅ和Ｏ４种杂质元素对其压缩力学性能的影响。结果表明，Ｓｉ元素和Ｏ元素含量的增加会降低镝的压缩强度，与此同时，其塑性也有明显地降低。金属镝中所含Ｃａ元素和Ｆｅ元素对其压缩强度的基本没有影响。