通信接收机的抗信道干扰问题

接收机产生干扰的机理分析是提高其抗干扰性能的基础和前提,为此文中对其作了详细阐述,并对降低接收机共信道干扰的改善措施也作了简明分析研究。本文为从事通信工作者理解与应用有关内容提供一轮廓性依据。     

基于数据的GSM系统天馈线干扰快速排查法

天馈线系统产生的无源互调干扰有其独特性,实践中多采用测试仪表现场排查方法,存在效率低下、准确率低等问题。针对这些问题,提出了利用基站系统作为互调检测硬件平台的天馈线干扰非现场排查法,可以通过干扰频谱数值对比,从复合干扰中分离出由天馈系统引发的互调干扰并对其进行定性,因而提高了检测排查的效率和准确性。     

Modeling power and intermodulation behavior of microwave transistors with unified small‐signal/large‐signal neural network models

This article presents a detailed procedure to learn a nonlinear model and its derivatives to as many orders as desired with multilayer perceptron (MLP) neural networks. A modular neural network modeling a nonlinear function and its derivatives is introduced. The method has been used for the extraction of the large‐signal model of a power MESFET device, modeling the nonlinear relationship of drain‐source current I_ds as well as gate and drain charge Q_g and Q_d with respect to intrinsic voltages V_gs and V_ds over the whole operational bias region. The neural models have been implemented into a user‐defined nonlinear model of a commercial microwave simulator to predict output power performance as well as intermodulation distortion. The accuracy of the device model is verified by harmonic load‐pull measurements. This neural network approach has demonstrated to predict nonlinear behavior with enough accuracy even if based only on first‐order derivative information. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 13: 276–284, 2003.     

无线电测控装备互调分析方法研究

在大型试验、演练中,靶场多台大型测控装备分别布设在陆基和海基不同站点,各装备相对于被测控目标的方位、俯仰不同,为达到合理布站、更好地完成测控任务,需要对装备进行合理的组网和互调分析。对互调理论应用于靶场试验中的方法进行了分析,对频率分配、装备布站、电磁兼容性等进行了研究,给出了计算模型和参数取值原则。     

非线性交调的频率设计

本文对于给定的非线性系统，通过对所给数据与条件的处理和分析，建立了输出ｙ关于输入频率ｆ１、ｆ２、ｆ３的数学模型。其次，根据模型中可能出现的交调频率的情况及系统的条件，自编程序并上机操作得出了符合全部要求的两组输入频率（３６，４２，５５）和（３６，４９，５５）。最后还对得出的数学模型进行了讨论和推广。     

Transceiver cascade system analysis and design via a contribution method

An approach to the design of cascade receiver and transmitter systems for maximum spurious‐free dynamic range (SFDR) is introduced. The contribution method developed here provides a good initial assignment of noise figure, gain, and linearity requirement to individual stages and enables informed assessment of trade‐offs during system design. Application of the approach to the design of a receiver preselector cascade for maximum SFDR is discussed. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

基于互调原理的交直交变流系统中的间谐波分析

基于现代调制理论，首先对整流器和逆变器进行统一调制建模，通过分析其交直流侧的频率变换关系，揭示交流侧谐波、间谐波的产生过程。将谐波和间谐波的分析统一起来。并指出直流侧的纹波信号是变流器产生间谐波的直接原因。通过分析交直交变流系统两侧的交流信号在直流侧的互调产物，考虑两侧变流器之间的相互影响，针对不同的运行工况，特别是考虑系统三相不平衡、存在背景谐波等非理想情况下，详细推导各种情况下交直交变流系统的直流侧的纹波频率特征，利用交直流侧频率转换规则，很好地揭示交直交变流系统中的间谐波产生机理。仿真实验验证理论推导的正确性和有效性。     

Behavioral modeling of power amplifiers for wireless applications

In this paper, an improved empirical behavioral model for radio‐frequency power amplifiers (RF‐PAs) is presented. The model was implemented in a commercial nonlinear microwave simulator. It belongs to the category of bandpass PA models, which exhibits memory effects due to the low frequency dependence of bias and temperature. Additionally, it facilitates accurate and efficient system level simulations of RF‐PA large‐signal behaviors such as self‐bias, AM‐AM, AM‐PM, gain expansion effects, and intermodulation distortion (IMD) sweet‐spots. The model was validated using measurement data obtained from a commercial CDMA PA at 1.88 GHz. © 2007 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2007.     

高功率微波条件下的无源互调问题综述

由于高功率微波(HPM)武器的应用和电子系统的复杂化,无源互调(PIM)问题变得日益突出.本文介绍了PIM问题的由来、发展概况,以及存在的问题,并且对无源互调产物(PIMP)的效应、预测和测量作了详细的论述.