dU/dt引发的MOSFET误导通分析

分析了MOSFET误导通产生的原因,分别从原理和理论推导两个方面作了分析,主要考虑了开关管中寄生参数对开关特性的影响。通过求解误导通发生的条件,得到哪些参数会导致误触发,最后给出了仿真。文中还提出如何避免MOSFET误导通产生,以及改进方法,对减少实际应用中MOSFET破坏性损坏有一定意义。     

锯齿型螺旋翅片管束传热与阻力性能的分析研究

对气流横掠锯齿型螺旋翅片管管束的对流传热进行了试验研究，并通过了工业试验验证，得出了相应的传热和阻力系数的数学关联式，可供设计计算使用。     

Device-physics-based analytical model for SET pulse in sub-100 nm bulk CMOS Process

Through revising the process of charge collection for reversed drain-bulk junction,a bias-dependent SPICE model is proposed which includes the bipolar amplification effect that cannot be ignored in PMOS.The model can capture the plateau effect,and produce current and voltage pulse shapes and widths that are consistent with TCAD simulation.Considering the case of connecting load,it is still valid.For combination and sequential logic circuits,the SET pulsewidths and LET upset threshold from SPICE model are consistent with TCAD simulations.     

Design of the broadband microstrip array antenna for blast furnace surface monitoring

Aiming at the requirements of high-resolution imaging and high integration of the blast furnace radar,this paper presents a method for designing a wideband microstrip array antenna,which broadens the antenna bandwidth through the design of parasitic patches and air layers.By combining multi-input multi-output (MIMO) radar and synthetic aperture radar (SAR) imaging principles,a linear MIMO array is designed,and a near-field simulation imaging experiment is performed on the simulated feed line through the wave number domain imaging algorithm.Simulation results show that the gain of the main lobe of the antenna can reach 14.05 dBi,the reflection coefficient is less than -10 dB,the absolute bandwidth is 5.25 GHz,the operating frequency is 20.67~25.92 GHz,and the range resolution is increased to 3 cm compared with the existing blast furnace radar.The average error of the azimuth direction of the simulated material line imaging is 0.008 m,and the range direction is 0.0011 m.Compared with the traditional microstrip array antenna,this antenna effectively widens the bandwidth,and the range resolution is higher than that of the traditional blast furnace radar.It can accurately obtain the shape information on the simulated material line,and has an engineering application value for blast furnace surface monitoring.     

考虑寄生参数的隔离型双有源桥DC-DC变换器的开关开路故障分析与容错控制策略

双有源桥(DAB)DC-DC变换器开关管的驱动电路故障导致开关开路故障(OCSF),这使得DAB系统拓扑对称性缺失、高频电压和电流发生畸变和直流偏置,进而对系统的可靠性和长期运行稳定性造成不良影响.对此,研究DAB开关管和高频变压器寄生参数对OCSF后系统运行状态的影响,以完善DAB故障分析体系.针对OCSF问题,提出一种基于对称拓扑和对偶原理的故障容错策略,通过闭锁开关使系统运行拓扑恢复对称,并在此基础上提出一种不改变控制器参数、只需改变控制器输出饱和参数的实用控制方法,并在理论上讨论了该方法的可行性.最后,通过实验验证了OCSF模态分析及所提容错控制策略的正确性.     

Supramolecular Nanofibers from Collagen-Mimetic Peptides Bearing Various Aromatic Groups at N-Termini via Hierarchical Self-Assembly

Self-assembly of artificial peptides has been widely studied for constructing nanostructured materials, with numerous potential applications in the nanobiotechnology field. Herein, we report the synthesis and hierarchical self-assembly of collagen-mimetic peptides (CMPs) bearing various aromatic groups at the N-termini, including 2-naphthyl, 1-naphtyl, anthracenyl, and pyrenyl groups, into nanofibers. The CMPs (R-(GPO)_n: n > 4) formed a triple helix structure in water at 4 °C, as confirmed via CD analyses, and their conformations were more stable with increasing hydrophobicity of the terminal aromatic group and peptide chain length. The resulting pre-organized triple helical CMPs showed diverse self-assembly into highly ordered nanofibers, reflecting their slight differences in hydrophobic/hydrophilic balance and configuration of aromatic templates. TEM analysis demonstrated that 2Np-CMP_n (n = 6 and 7) and Py-CMP₆ provided well-developed natural collagen-like nanofibers and An-CMP_n (n = 5–7) self-assembled into rod-like micelle fibers. On the other hand, 2Np-CMP₅ and 1Np-CMP₆ were unable to form nanofibers under the same conditions. Furthermore, the Py-CMP₆ nanofiber was found to encapsulate a guest hydrophobic molecule, Nile red, and exhibited unique emission behavior based on the specific nanostructure. In addition to the ability of CMPs to bind small molecules, their controlled self-assembly enables their versatile utilization in drug delivery and wavelength-conversion nanomaterials.     

The haustorium and the chemistry of host recognition in parasitic angiosperms

Two parasitic angiosperms,Agalinis purpurea (Scrophulariaceae) andStriga asiatica (Scrophulariaceae), are compared as to the chemical recognition events involved in host selection.Agalinis is a hemiparasite which can mature to seed-set without a host, whereasStriga is a holoparasite and survives for only a very limited time without a host. Both parasites, however, attach to a host through a specialized organ known as the haustorium and regulate the development of this organ through the recognition of chemical factors from host plants. We now describe the discovery of 2,6-dimethoxy-p-benzoquinone (2,6-DMBQ) as an haustoria-inducing principle fromSorghum root extracts. Our investigation of this compound has led us to suggest that one level of host recognition in these parasitic plants is mediated through their enzymatic digestion of the host root surface. Degradation of surface components liberates quinonoid compounds, such as 2,6-DMBQ, which in turn trigger haustorial development.     

基于阿基米德螺线的磨盘挤出机数学模拟

介绍了阿基米德螺线磨盘挤出机的数学模拟,建立了磨盘的物理模型和数学模型,并给出了流场的速度分布和压力分布。采用CAD/CAM/CAE技术研究了磨盘转速及其槽深和槽宽对压力分布和剪切速率分布的影响。     

Thermal properties measurements of renatured gelatin using conventional and temperature modulated differential scanning calorimetry

The thermal properties of amorphous gelatin films and gelatin films with renatured structural order were measured by using conventional and temperature modulated differential scanning calorimetry (DSC). Different amounts of gelatin structural order associated with a melting enthalpic change in the DSC measurement were prepared based on different gelatin drying conditions. Two consecutive heating and cooling DSC measurements on the gelatin films showed that there was no change in the glass‐transition temperature (T_g) for the amorphous gelatin but there was a decrease in the T_g for the structural gelatin on the second DSC scan. This decrease was attributed to the plasticizing effect from the release of originally hydrogen‐bonded water associated with the structural gelatin. In addition, a reversing endotherm observed upon melting of the structural gelatin during a temperature modulated DSC measurement indicated that the transition of bound water to free water occurred as the partial triple‐helix gelatin melted. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1795–1801, 2006     

CMOS图像传感器中分段电容DAC非理想因素研究

CMOS图像传感器信号处理中通常采用分段电容DAC产生斜坡参考电压。研究了分段电容DAC精确的电容失配及寄生与其转换精度的关系式。基于对分段电容DAC工作原理的研究,导出了电容失配及寄生模型;针对其分数桥接电容失配、各二进制电容间的失配及寄生电容问题进行了理论分析;对分段电容DAC进行非理想因素仿真,设计了一个采用分段电容DAC的10位单斜ADC并对其进行测试,仿真和测试结果均验证了理论分析的正确性。上述理论分析结果可作为分段电容DAC的设计指导。