Analysis of the detectivity for triple-layer heterojunction GaSb/GaInAsSb infrared detectors

In this paper, the detectivity is calculated and analyzed with the front-or backside illuminated case for both N-GaSb/p₂-Ga_0.8In_0.2As_0.19Sb_0.81/p₁-Ga_0.9In_0.1As_0.09Sb_0.91 and N₁-GaSb/n₂-Ga_0.9In_0.1As_0.09Sb_0.91/p-Ga_0.8In_0.2As_0.19Sb_0.81 infrared photovoltaic detectors, respectively. The analysis results show that the main absorption appears in the p-type Ga_0.8In_0.2As_0.19Sb_0.81 material with either front- or backside illuminated case for above two structures. In each structure, the carrier concentration obviously affects the detectivity. The carrier concentration in the wide-bandgap material for the isotype heterojunction should be reduced as low as possible to reduce the tunneling rate at the isotype heterointerface. Moreover, the change of the detectivity with the p-side surface recombination velocity for the N₁-n₂-p structure is more sensitive than that with the p₁-side surface recombination velocity for the N-p₂-p₁ structure. In the N-p₂-p₁ structure with the incident light from the p₁-side surface, two-color detection is achieved.     

混合集成型光学拾音器的设计与制作

通过混合集成型结构光学拾音器的光学设计和芯片设计，制作了包含微光学棱镜，光电探测器和信号放大电路的混合集成型光学拾音器。经过测试，发现有较好的信号输出特性，表明混合集成型光学拾音器已基本研制成功。     

Optoelectronic Synapses and Photodetectors Based on Organic Semiconductor/Halide Perovskite Heterojunctions: Materials,Devices, and Applications

Both photodetectors (PDs) and optoelectronic synaptic devices (OSDs) are optoelectronic devices converting light signals into electrical responses. Optoelectronic devices based on organic semiconductors and halide perovskites have aroused tremendous research interest owing to their exceptional optical/electrical characteristics and low-cost processability. The heterojunction formed between organic semiconductors and halide perovskites can modify the exciton dissociation/recombination efficiency and modulate the charge-trapping effect. Consequently, organic semiconductor/halide perovskite heterojunctions can endow PDs and OSDs with high photo responsivity and the ability to simulate synaptic functions respectively, making them appropriate for the development of energy-efficient artificial visual systems with sensory and recognition functions. This article summarizes the recent advances in this research field. The physical/chemical properties and preparation methods of organic semiconductor/halide perovskite heterojunctions are briefly introduced. Then the development of PDs and OSDs based on organic semiconductor/halide perovskite heterojunctions, as well as their innovative applications, are systematically presented. Finally, some prospective challenges and probable strategies for the future development of optoelectronic devices based on organic semiconductor/halide perovskite heterojunctions are discussed.     

Boosted Photocurrent via Heating BiFeo3 Thin Film for UV Photodetector at Wide Temperature Range

The current research on ferroelectric photovoltaic materials is concentrated on enhancing the output photocurrent. As solar cells operate at high temperatures, it is crucial to take into account the effect of increasing temperatures on ferroelectric photovoltaics. In this study, an LNO (lanthanum nickelate, LaNiO₃)/BFO (bismuth ferrate, BiFeO₃)/ITO (indium tin oxide) device is constructed on a mica substrate by sol–gel method. The device achieves output photocurrent enhancement at a wide temperature range (33–183 °C), with the largest photocurrent enhancement at 130 °C, which is 178% relative to room temperature, and the output power is also increased by 9.88 times. At the same time, compared with BFO bulk, it is found that the performance of BFO film is always higher than that of bulk in the test temperature range, and the output photocurrent of BFO film at room temperature is 104 times higher than that of bulk. This article investigates the effect of high temperatures on ferroelectric photovoltaics and also provides a strategy for enhancing the photovoltaic performance of ferroelectric films, providing guidance for future applications of ferroelectric films in flexible solar cells and other applications.     

Ultra-Stable and Sensitive Ultraviolet Photodetectors Based on Monocrystalline Perovskite Thin Films

The detection of ultraviolet (UV) radiation with effective performance and robust stability is essential to practical applications. Metal halide single-crystal perovskites (ABX₃) are promising next-generation materials for UV detection. The device performance of all-inorganic CsPbCl₃ photodetectors (PDs) is still limited by inner imperfection of crystals grown in solution. Here wafer-scale single-crystal CsPbCl₃ thin films are successfully grown by vapor-phase epitaxy method, and the as-constructed PDs under UV light illumination exhibit an ultralow dark current of 7.18 pA, ultrahigh ON/OFF ratio of ≈5.22 × 10⁵, competitive responsivity of 32.8 A W⁻¹, external quantum efficiency of 10867% and specific detectivity of 4.22 × 10¹² Jones. More importantly, they feature superb long-term stability toward moisture and oxygen within twenty-one months, good temperature tolerances at low and high temperatures. The ability of the photodetector arrays for excellent UV light imaging is further demonstrated.     

Lateral WSe2 Homojunction through Metal Contact Doping: Excellent Self-powered Photovoltaic Photodetector

Here an IR-heating chemical vapor deposition (CVD) approach enabling fast 2D-growth of WSe₂ thin films is reported, and the great potential of metal contact doping in building CVD-grown WSe₂-based lateral homojunction is demonstrated by contacting with TiN/Ni metals in favor of holes/electrons injection. Shortening nanosheet channel to ≈2 µm leads to pronounced enhancement in the performance of diode. The fabricated WSe₂-based diode exhibits high rectification ratios without the need of gate modulation and can work efficiently as photovoltaic cell, with maximum open circuit voltage reaching up to 620 mV and a high power conversion efficiency over 15%, empowering it as superb self-powered photodetector for visible to near-infrared lights, with photoresponsivity over 0.5 A W⁻¹ and a fast photoresponse speed of 10 µs under 520 nm illumination. It is of practical significance to achieve well-performed photovoltaic devices with CVD-grown WSe₂ using fab-friendly metals and simple processing, which will help pave the way toward future mass production of optoelectronic chips.     

Near-infrared photodetection with a diruthenium complex having redox-switchable wavelength response

We report on the electrochromic behavior of a dinuclear ruthenium complex, which provides high environmental stability together with an intense absorption maximum at 1237 nm in solution in its +3 oxidation state. To verify its optoelectronic properties, we used this complex as the photoactive material in a planar photodetector prototype for near-infrared light pulses, succeeding in the detection of a train of light pulses at a wavelength of 1280 nm.     

Fast and Highly Sensitive Ionic‐Polymer‐Gated WS2–Graphene Photodetectors

The combination of graphene with semiconductor materials in heterostructure photodetectors enables amplified detection of femtowatt light signals using micrometer‐scale electronic devices. Presently, long‐lived charge traps limit the speed of such detectors, and impractical strategies, e.g., the use of large gate‐voltage pulses, have been employed to achieve bandwidths suitable for applications such as video‐frame‐rate imaging. Here, atomically thin graphene–WS₂ heterostructure photodetectors encapsulated in an ionic polymer are reported, which are uniquely able to operate at bandwidths up to 1.5 kHz whilst maintaining internal gain as large as 10⁶. Highly mobile ions and the nanometer‐scale Debye length of the ionic polymer are used to screen charge traps and tune the Fermi level of the graphene over an unprecedented range at the interface with WS₂. Responsivity R = 10⁶ A W^?1 and detectivity D* = 3.8 × 10¹¹ Jones are observed, approaching that of single‐photon counters. The combination of both high responsivity and fast response times makes these photodetectors suitable for video‐frame‐rate imaging applications.     

Enhanced Performance of a Self‐Powered Organic/Inorganic Photodetector by Pyro‐Phototronic and Piezo‐Phototronic Effects

Self‐powered photodetectors (PDs) have long been realized by utilizing photovoltaic effect and their performances can be effectively enhanced by introducing the piezo‐phototronic effect. Recently, a novel pyro‐phototronic effect is invented as an alternative approach for performance enhancement of self‐powered PDs. Here, a self‐powered organic/inorganic PD is demonstrated and the influences of externally applied strain on the pyro‐phototronic and the photovoltaic effects are thoroughly investigated. Under 325 nm 2.30 mW cm^‐2 UV illumination and at a ‐0.45% compressive strain, the PD's photocurrent is dramatically enhanced from ≈14.5 to ≈103 nA by combining the pyro‐phototronic and piezo‐phototronic effects together, showing a significant improvement of over 600%. Theoretical simulations have been carried out via the finite element method to propose the underlying working mechanism. Moreover, the pyro‐phototronic effect can be introduced by applying a ‐0.45% compressive strain to greatly enhance the PD's response to 442 nm illumination, including photocurrent, rise time, and fall time. This work provides in‐depth understandings about the pyro‐phototronic and the piezo‐phototronic effects on the performances of self‐powered PD to light sources with different wavelengths and indicates huge potential of these two effects in optoelectronic devices.