Fabrication and characteristics of tapes and test magnets made from Ag-Clad Bi-2223 superconductors

Pb_0.4Bi_1.8Sr₂Ca_2.2Cu₃O_x (Bi-2223) precursor powder was prepared by a solid-state reaction of carbonates and oxides of lead, bismuth, strontium, calcium, and copper, and the powder was then used to fabricate silver-clad tapes by the powder-in-tube technique. Transport critical current density (J_c) values>4×10⁴ A/cm² at 77K and 2×10⁵ A/cm² at 4.2 and 27K have been achieved in short tape samples. Long lengths of tape were tested by winding them into pancake coils. Recently, we fabricated a test magnet by stacking ten pancake coils, each containing three 16m lengths of rolled tape, and tested it at 4.2, 27 and 77K. A maximum generated field of 2.6 T was measured in zero applied field at 4.2K and the test magnet generated significant self-field in background fields up to 20 T. The results are discussed in this paper.     

空调表冷器性能微机测试系统设计与软件开发

介绍了一套用于空调表冷器性能测试的试验装置及配套软件，重点叙述了系统的总体构成、程序的设计思想以及数据采样和处理等功能模块。微机测试技术以及配套软件的使用大大减少了测试人员的工作量，并在一定程度上提高了测试的精度。     

贝氏体钢内水冷穿孔顶头的粘钢及防止措施

从顶头生产工艺控制的角度,分析了贝氏体钢内水冷穿孔顶头产生粘钢的原因、特点和机制,指出掉鼻、缺肉是顶头粘钢的另一种更为严重的失效形式,强化熔炼工艺控制和保证夹杂物总量在A0.5B1C0.5D1级水平,粘钢问题可以得到有效控制。     

基于种群多样性的自适应PSO算法求解VRPSPD问题

为有效求解逆向物流车辆路径(VRPSPD)模型,本文提出一种基于种群多样性的自适应PSO算法(SDAPSO)。在SDAPSO运行时,根据种群多样性,自适应地对种群中运行较差的粒子进行扰动操作,提升这些粒子向最优解收敛的能力;同时,对全局最优粒子进行概率扰动,以增加种群的多样性。标准检测函数的仿真结果表明SDAPSO算法是对基本PSO算法的有效改进。在对VRPSPD模型求解中,通过与其它粒子群算法相比,表明SDAPSO是求解该类问题的一种有效方法。     

浅析SRT-Ⅳ裂解炉炉管弯曲及断裂原因

主要分析计算了裂解炉炉管受力情况，进而得出结论：裂解炉自身结构的相互约束力和炉管渗碳是导致炉管弯曲、断裂的主要原因，并提出了相应的解决措施。     

Flow regimes,hold–up and pressure drop for two phase flowin helical coils

Experimental results on flow pattern, hold–up and pressure drop are presented for cocurrent upward and downward air water flow in helical coils. A tube of 0.01 m internal diameter was used and the ratio of coil to tube diameter was varied from 11 to 156.5. Water flow rate was varied from 4.9 × 10-⁶ m³/s to 92 × 10-⁶ m³/s while the range of gas flow rate covered was 83 × 10-⁶ m³/s to 610 × 10-⁶ m³/s. A new mechanistic approach is proposed to correlate pressure drop data in coils. The proposed model retains the identity of each phase and separately accounts for the effects of curvature and tube inclination resulting from the torsion of the tube. This makes it possible to use a single model to predict pressure drop for both upward and downward two–phase flow in coiled tubes. Required correlations for hold–up, interfacial friction factor and friction factors for individual phases are provided.     

基于Pro/TOOLKIT异步模式特征识别方法

对Pro／Engineer（Pro／E）二次开发工具Pro／TOOLKIT（PTC公司为Pro／E软件提供的二次开发工具包）的异步模式进行了研究，充分利用参数化技术，开发了实体模型的特征识别系统。系统可以控制Pro／E的自动启动及关闭，使其在后台运行。通过模型的调用实现实体特征的快速识别提取，为模具估价系统的智能化设计做好了准备。     

The Effects of Power Law Fluid Rheology on Coil Heat Transfer for Agitated Vessel in the Transitional Flow Regime

A CFD model of heat transfer from power‐law fluids to helical cooling coils in the transitional flow regime of a baffled tank mixed with a pitched blade turbine was developed with Fluent^TM. The model captured local temperature and velocity gradients. Simulations were run, varying Re, Pr, K and n. The results indicate that a Sieder‐Tate type correlation, with the exponent on and the coefficient in front of the Reynolds number being a function of n, is recommended for estimating ho. Also, a new two coil bank design was found to be more efficient when 450 < Re < 650.     

远场涡流技术检测带翼片管的研究

远场涡流检测对高导电管的管壁上的缺陷非常敏感，具有透壁性。探讨应用远场涡流技术检测带翼片(散热片或金属隔板组件)钢管的有关问题，分析了管外翼片对远场涡流的耦合特性和缺陷信号的影响，得出了翼片响应信号与缺陷信号的关系及缺陷信号的提取方法。     

高性能PCB空心线圈电流互感器用于矿区电力系统的研究

高性能PCB空心线圈电流互感器为大截面结构,而理想空心线圈电流互感器要求为小截面结构。文章通过详细的理论分析和推导,解除了对截面大小的这一限制,得出大截面、高精度的PCB空心线圈电流互感器具有和理想空心线圈电流互感器相同测量原理的结论,为PCB空心线圈电流互感器的优化设计和在矿区电力系统中的应用提供了理论基础。实验研究结果表明,高性能PCB空心线圈电流互感器具有良好的测量精度、参数一致性、优异的工频暂态性能和抗电磁干扰能力,适应矿区的电力环境和电力系统进一步数字化的发展潮流。