电路电磁兼容建模与仿真

提出了对暴露在任意外场中的传输线进行时频分析的新方法，这种方法非常稳定，它能够与任意的传输线模型和电路仿真方法兼容，并且使用这种方法得到的仿真值和实际值之间的差别小于1％。     

大型连杆流线简易试验方法

介绍了一种大型连杆流线的简易试验方法及其评价原则。该方法可清晰显示流线，并适合任何尺寸和形状的锻造连杆的流线试验。     

一种自动布线方法：多级线探索法

本文介绍了一种在微机上实现的印制板自动布线方法──多级线探索法及其编程方法。这种方法是基于完备布线算法的概念，通过分析李氏算法和传统线探索法的不足之处而得到的。虽然它也是一种线探索法，但有较传统线探索法更强的探索能力，不需要结合李氏算法而能单独完成布线任务，是一种较理想的算法，通过实验获得了较为满意的效果。     

Effective lightning protection schemes for distribution line

The causes of lightning outage are subdivided into direct lightning strokes and induced lightning strokes, which are identified by the characteristics of the lightning overvoltage. In the past, lightning protection devices were directed mainly toward the latter, and attention has been focused on the installation of lightning protection devices, ground wires, and reinforcement of insulators. However, lightning outages continue to occur. Thus it is extremely important to clarify the fault characteristics of lightning surges and to study the effectiveness of various lightning protection devices by considering both direct lightning stroke and induced lightning stroke in order to prevent lightning outage in the future. In this research, the electromagnetic transients program (EMTP) has been applied to the direct lightning stroke, and the induced lightning outage analysis program for multiple conductor systems has been applied to the induced lightning stroke to study the effectiveness of lightning protection devices provided by combination of various lightning protection devices. The most effective lightning protection schemes are analyzed and evaluated based on verification tests on the full scale models as well as economic considerations.     

CIMS装配和拆卸生产线的可靠性分析

本文对ＣＩＭＳ装配线和拆卸线的可靠性问题进行研究。文中分析了它们的运行状况，求出了两种生产线的稳态可用度，并用一个例子加以说明。     

非串行生产线的建模,分析及设计

本文利用等效工作站理论和工件流平衡原理，推导出非串行离散事件生产线可以等价于串联系统，并归结为装配和拆卸两条定理，解决了系统的建模、分析与设计问题。     

200 万t链箅机-回转窑球团生产线快速达产实践

介绍了邯钢200万t链箅机-回转窑酸性氧化球团生产线的工艺特点和主要设备,以及建成投产后试生产的有关情况。通过周密的部署和安排,该生产线实现了40天快速达产的目标。     

Signed line intercept count

Elements of surfaces that bound a phase (β) in a two phase mixture (α+β) may be classified as: (a) convex (++) if both principal curvatures are positive; (b) concave (? ?) if both are negative; and (c) saddle (+ ?) if one is positive and the other negative. This classification excludes the limiting cases for which one or both of the principal curvatures is zero. The traces of these surfaces that form the boundaries of the β areas on a representative two dimensional section may also be: (a) convex (+) if the local curvature is positive; or (b) concave (?) if it is negative. Line intercepts may be tabulated separately for intersections with convex (+) and concave (?) segments of boundary. This paper presents a derivation of fundamental stereological formulae that relate these counting measurements to three-dimensional geometric properties of the structure they sample.     

Line balancing in a just-in-time production environment: balancing multiple U-lines

The introduction of multiple, independent production lines has helped many firms to increase their production flexibility, provide for redundancy when equipment breaks down, reduce idle time and labor costs, and achieve many other benefits. This paper introduces and formalizes the multiple U-line balancing problem. Optimal solution methodologies are provided for Type I (minimize the number of stations for a given cycle time), Type II (minimize the cycle time for a given number of stations), and cost-minimization line-balancing problems. A branch-and-bound algorithm is also developed for the situation in which equipment requirements are dependent on the line configuration and the task assignment to stations. Computational results indicate that the greatest benefit of exploiting multiple lines occurs for smaller cycle-time problems that require higher output.     

冷轧厂酸洗机组3号横剪大流量中高压液压系统设计方案探讨

在宝钢２０３０ｍｍ冷轧厂酸洗机组中，为了满足厚规格ＩＦ钢的生产，拟将原有的气动式剪切机改成液压式剪切机。为此，设计了一套中高压大流量的液压系统以满足３号横剪大剪切力（最高达７００ｋＮ）和快速剪切（３秒／次）的需要。由于采用了蓄能器增速回路和二通插装阀控制技术，使该液压系统较传统的剪切机液压系统具有响应速度快、体积小、重量轻、发热少和降低电机能耗等优点。