A New Comb Circular Polarizer Suitable for Millimeter‐Band Application

This letter presents a new polarizer which has a simple comb structure inside a circular waveguide. The electrical performance of the proposed comb polarizer is optimized by a circular waveguide radius and by the physical parameters of the comb plates. This polarizer is suitable for providing good performance in millimeter‐band application because of its simple structure and low fabrication cost. In our experiments the dual‐band comb polarizer designed in band 1(K) and band 2(Ka) showed good electrical performance without any tuning elements.     

Profiling Voids Embedded in a Slab by a Non-Linear Model

In this paper, by applying a non linear model for the electromagnetic inverse scattering, a technique for the dielectric profiling of a planarly layered medium is investigated and applied to void localization and diagnostics inside a homogeneous lossless slab (one-dimensional geometry). Data are collected under plane wave multifrequency normal incidence. Suitable finite dimensional representations for the unknown functions are introduced and their influence on the model is discussed. The resulting functional equation is solved by the method of weighted residuals and the solution algorithm amounts to minimizing a non quadratic function, where particular attention is devoted to reduce the occurrence of local minima. Finally, the inversion algorithm is validated by applications to both simulated and experimental data.     

A versatile data acquisition system for time resolved X-ray scattering using gas proportional detectors with delay line readout

A data acquisition system for time resolved X-ray scattering experiments using linear, quadrant or area gas proportional detectors with delay line readout based on commercially available hardware (National Instruments) is described. The system can easily be configured for recording data from point detectors (e.g. photomultipliers and photodiodes) and/or ancillary data only. Applications involving measurements with two different types of time to digital converters illustrate the features and performances of the system.     

Assessing organo-clay dispersion in polymer layered silicate nanocomposites: A SAXS approach

A SAXS method for the quantitative assessment of the morphology of polymer layered silicate nanocomposites is proposed. Fitting the SAXS patterns, the number of clay layers, the periodicity of the layers in the tactoids, the thickness of the regions interposed between the clay platelets and their distributions can be measured. A good agreement with TEM data was obtained, avoiding the inconsistencies with microscopical observations often reported in the literature.     

A small-angle X-ray scattering study of powder compaction

This work demonstrated a novel and potentially important application of two-dimensional small-angle X-ray scattering (2D-SAXS) to investigate powder compaction. SAXS from powder compacts of three materials commonly used for pharmaceutical tabletting exhibited azimuthal variations, with stronger intensity in the direction of the applied compaction force, relative to the transverse direction. This implied that compaction of a (macroscopic) powder could also produce changes on the molecular (nanometre) scale, which can be probed by 2D-SAXS. Two possible explanations for this effect were suggested. A combination of anisometric (i.e. elongated or flattened) granules with anisotropic morphologies could result in azimuthal variation in X-ray scattering due to granule orientation. It is expected that this mechanism would require relatively low packing density, so may operate during die filling. Granule re-orientation appeared less likely at higher packing densities and compaction pressures, however. Under these conditions, the changes in the 2D-SAXS patterns would be consistent with the powder granules becoming relatively flattened in the compression direction, with corresponding changes in their nano-scale morphology. The magnitude of this effect was found to vary between the materials used and increased with compaction pressure. This suggested that 2D-SAXS studies could provide useful information on force-transmission within a compressed powder. Further analysis of the data also suggested differences in the compaction mechanisms (i.e. granule re-orientation, deformation or fragmentation) between the materials studied.     

Distributed Optical Fiber Sensor for Multi-point Temperature Measurement

The distributed optical fiber sensing technology is overviewed, which is based on Raman scattering light theory. Basic operation principle, structure, system characteristics and signal processing are discussed. This structure and method of the signal processing possess of certain spatial resolution, hence will ensure the practicability of system.     

Determination of the width of the transition layer between the crystalline and amorphous zones in nylon 1010 by SAXS

The width of the transition layer between the crystalline and amorphous zones in nylon 1010 was determined by SAXS with point collimation and long-slit collimation, respectively. The width of the transition layer, E, was found to be 1.7 nm. The results show that the width of the transition layer is independent of crystallinity.     

电离层时域探测方法

给出了各向同性分层半空间等离子体对时域电磁脉冲后向散射的有关公式，得出了反抛物层时域响应的解析表达式，并利用时频分析方法演出了电子密度分布。     

复杂目标近场电磁散射的可视化计算方法

首次介绍了复杂目标近场散射计算的可视化方法。采用非均匀有理Ｂ样条曲面（ＮＵＲＢＳ）精确构造任意形状散射体，结合几何体近场透视变换和Ｚ－Ｂｕｆｆｅｒ技术实现了基于Ｗｉｎｄｏｗｓ平台的近场散射计算。提出广义雷达散射截面的概念并给出的若干算例。该方法充分利用了计算机３Ｄ图形设备的几何运算能力，运算速度快，严谨高，可扩展性好。     

复射线展开法分析圆柱面对平面波散射的精度问题

讨论了用复射线展开法计算圆柱面对入射平面波散射时的计算误差特性，提出了控制其计算精度的复射线展开参数选择方法，证实了通过恰当选择展开参数可以有效地提升计算精度、实现误差控制。