High-pressure dc sputtering of High-Tc BPSCCO thin films withTc(0) above 100 K

High-T _c Bi(Pb)-Sr-Ca-Cu-O thin films have been made on single-crystal MgO substrates using high-pressure dc sputtering technique. X-ray studies confirm the crystallinity and highly oriented structure withc-axis perpendicular to the substrate. By optimizing the annealing schedule the formation of the high-T _c phase is stabilized. The best film exhibited superconducting transition temperature with zero-resistance temperature,T _c(0), as high as 101 K. Temperature dependence ofJ _c indicates the presence of Josephson-type weak links.     

High-field magnetic and transport critical current density of Sm-Ba-Cu-O: Agx superconductors at low temperature

Variation of magnetic critical current density (J _mc) and transport critical current density (J _tc) in high magnetic fields at liquid helium temperature were investigated on Sm-Ba-Cu-O: Ag _x (x=0.0, 0.2, 0.4, and 0.6) superconducting samples prepared by the coprecipitation technique.T _c and crystallographic parameters remain unaffected by Ag addition. However, bothJ _mc andJ _tc were found to increase on Ag addition. The volume pinning force (F _p) also increased with increase in Ag concentration, resulting in stronger flux line sheer. Microwave-induced d.c. voltage measurement shows a significant reduction of the total number of weak links between the superconducting grains with increasing concentration of Ag, which creates stronger pinning potentials between the boundary of the superconducting intergrains. Hence, the volume pinning force is greatly enhanced by Ag addition, leading to flux line lattice movement which is responsible for highJ _mc andJ _tc.     

Study of Liquid Phase Shifter for ICRF on EAST

A method of current drive with Ion Cyclotron Range of Frequency （ICRF） on Experimental Advanced Superconducting Tokomak （EAST） is described. A variety of liquid silicon oil heights in the phase shifter will bring the phase difference to the current drive. It is found that the current drive can be achieved by using the phase shifter. The liquid phase shifter is one of the impedance matching systems too.     

基于动态依赖的类间测试顺序研究

类间集成测试顺序决定着测试成本的大小,为了得到合适的测试顺序,提出了一种基于动态依赖的类间测试顺序的方法。首先分析对象关系图中类间依赖关系,然后运用边删除规则去除环路,最后运用有向无环图的拓扑序列给出类的测试顺序。仿真结果表明,本文的方法较Briand的方法减少了42%的测试桩。此方法满足最小化测试桩的需要,提高了测试效率,减少了测试成本。     

Gel chromatographic investigation of p-benzoquinone and styrene products copolymerized in the presence of BF3·OEt2

The molecular weight distribution of copolymers of p-benzoquinone and styrene was studied by g.p.c.. It was shown that the products synthesized have low molecular weights and narrow MWD. p-Benzoquinone was found to be a copolymer macromolecule regulator.     

斗轮机行走装置履带结的失效分析

履带结是露天煤矿中广泛采用的斗轮式采煤机上的重要零件，其运行中的失效会带来灾难性的安全事故。在分析履带结失效原因的基础上，参考有关资料，研制新的钢种。用新钢种制造的履带结在煤矿中运行正常，说明失效分析工作和新钢种的研发是成功的。     

电力巡线无人机数据传输系统研究

针对无人机数据链系统需要同时传输不同类型信息而且其性能指标迥异的问题,提出了安全性非对称信息一体化传输技术。该技术采用直接序列扩频技术对遥测等重要数据进行附加保护,与图像数据复接后统一进行QPSK调制,解决了直接复接技术可靠性不足、UQPSK功率分配灵活性差的问题,实现了多类型信息的差别复合传输。仿真结果表明,在改善频带利用率的同时,提高了重要信息链路的接收信噪比,与理论分析一致。     

Finite‐time asynchronous filtering for discrete‐time Markov jump systems over a lossy network

This paper is concerned with the problem of finite‐time asynchronous filtering for a class of discrete‐time Markov jump systems. The communication links between the system and filter are assumed to be unreliable, which lead to the simultaneous occurrences of packet dropouts, time delays, sensor nonlinearity and nonsynchronous modes. The objective is to design a filter that ensures not only the mean‐square stochastic finite‐time bounded but also a prescribed level of performance for the underlying error system over a lossy network. With the help of the Lyapunov–Krasovskii approach and stochastic analysis theory, sufficient conditions are established for the existence of an admissible filter. By using a novel simple matrix decoupling approach, a desired asynchronous filter can be constructed. Finally, a numerical example is presented and a pulse‐width‐modulation‐driven boost converter model is employed to demonstrate the effectiveness of the proposed approach. Copyright © 2016 John Wiley & Sons, Ltd.     

Independently controllable dual‐band microstrip bandpass filter using quadruple‐mode stub‐loaded resonator

In this article, a quadruple‐mode stub‐loaded resonator (QM‐SLR) is introduced and its four modes are excited using a simple approach, which can provide a dual‐band behavior. By changing the length of the loaded stubs, independently tunable transmission characteristics of the proposed quadruple‐mode stub‐loaded resonator were extensively described for filter design. Moreover, microwave varactors were adopted to represent the length variation of the loaded stubs for the dual‐band tunability. The equivalent circuit modeling of the open stub with microwave varactor was given and discussed. Then, adopting the compact quadruple‐mode stub‐loaded resonator with three varactors, an independently controllable dual‐band bandpass filter (BPF) was designed, analyzed, and fabricated. Its separated bandwidths and transmission zeros can be tuned independently by changing the applying voltage of the microwave varactors. A good agreement between simulated and measured results verified the design methodology. The proposed filter possesses compact size, simple structure, and excellent dual‐band performances. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:602–608, 2016.     

具有耐火钢短梁的钢框架梁-柱连接抗火性能模拟

通过有限元模拟探讨将耐火钢短梁应用于钢框架梁 柱连接以提高连接抗火性能的可能性.考察三维有限元建模过程中模型简化、网格划分、求解方法和接触关系等关键技术,以提高计算效率并确保分析结果的可靠性.提出3个确定极限温度的准则并应用于钢框架,通过比较可知：对于采用普通钢的钢框架,采用准则1与准则2确定的极限温度与由最大挠度为L/20和L/10所确定的临界温度较接近,这有益于指导钢框架抗火设计.比较普通钢与耐火钢短梁的变形可知：耐火钢的使用可以有效控制跨中挠度变形,使最大变形值减小1/2以上.