浅谈我公司0.6mm超薄浮法玻璃生产

我公司在成功生产出1.1mm超薄浮法玻璃的基础上,又对原料、熔化、成型、退火等影响超薄玻璃质量的各种因素进行了全方位的技术攻关,成功生产出0.6mm超薄浮法玻璃,填补了国内空白.     

超薄精密件对接接头图像采集和信息识别

针对0.1 mm不锈钢超薄板的超薄和微小尺寸等特点,研究其对接接头图像采集方案和信息识别方法;对比分析了曝光时间、亮度对图像采集的影响,采用Levenberg-Marquardt算法和全局优化法得出曝光时间、亮度和图像平均灰度值三者之间的匹配关系式;为了消除对接接头边缘毛刺、划痕和颗粒噪声对接头图像信息识别的影响,运用阈值分割、腐蚀和膨胀等形态学处理方法进行“去噪”处理,精确地得出了超薄板对接接头的信息.     

Development of an Asymmetric Hydrophobic/Hydrophilic Ultrathin Graphene Oxide Membrane as Actuator and Conformable Patch for Heart Repair

A conductive engineered cardiac patch (ECP) can reconstruct the biomimetic regenerative microenvironment of an infarcted myocardium. Direct ink writing (DIW) and 3D printing can produce an ECP with precisely controlled microarchitectures. However, developing a printed ECP with high conductivity and flexibility for gapless attachment to conform to epicardial geometry remains a challenge. Herein, an asymmetrical DIW hydrophobic/hydrophilic membrane using heat-processed graphene oxide (GO) ink is developed. The “Masked spin coating” method is also developed that leads to a microscale GO (hydrophilic)/reduced GO (rGO, hydrophobic) physiological sensor, as well as a macroscale moisture-driven GO/rGO actuator. Depositing mussel-inspired polydopamine (PDA) coating on the one side of the DIW rGO , the ultrathin (approximately 500 nm) PDA-rGO (hydrophilic)/rGO (hydrophobic) microlattice (DrGOM) ECP is bestowed with the flexibility and moisture-responsive actuation that allows gapless attachment to the curved surface of the epicardium. Conformable DrGOM exhibits a promising therapeutic effect on rats' infarcted hearts through conductive microenvironment reconstruction and improved neovascularization.     

Ultra-Thin Single-Particle-Layer Sodium Beta-Alumina-Based Composite Polymer Electrolyte Membrane for Sodium-Metal Batteries

Inorganic/organic composite polymer electrolytes (CPEs) with good flexibility and electrode contact have been pursued for solid−state sodium-metal batteries. However, the application of CPEs for high energy density solid−state sodium-metal batteries is still limited by the low Na⁺ conductivity, large thickness, and low ion transference number. Herein, an ultra-thin single-particle-layer (UTSPL) composite polymer electrolyte membrane with a thickness of ≈20 µm straddled by a sodium beta−alumina ceramic electrolyte (SBACE) is presented. A ceramic Na⁺-ion electrolyte that bridges or percolates across an ultra-thin and flexible polymer membrane provides: 1) the strength and flexibility from the polymer membrane, 2) excellent electrolyte/electrode interfacial contact, and 3) a percolation path for Na⁺-ion transfer. Owing to this novel design, the obtained UTSPL-35SBACE membrane exhibits a high Na⁺-ion conductivity of 0.19 mS cm⁻¹ and a transference number of 0.91 at room temperature, contributing to long−term cycling stability of symmetric sodium cells with a small overpotential. The assembled quasi-solid-state cell with the as−prepared UTSPL-35SBACE membrane displays superior cycling performance with a discharge capacity of 105 mAh g⁻¹ at 0.5 °C rate after 100 cycles and excellent rate performance (82 mAh g⁻¹ at 5 °C rate) at room temperature with the potassium manganese hexacyanoferrate (KMHCF)@CNTs/CNFs cathode, where KMHCF refers to potassium manganese hexacyanoferrate.     

极薄煤层综采技术的研究与应用

介绍了我国极薄煤层采煤技术的现状,指出现有的综采设备不适用于极薄煤层开采;介绍了适合极薄煤层综采的新型采煤机、液压支架、刮板运输机的结构、性能特点,提出了极薄煤层综采工艺。实践表明,该新型极薄煤层综采装备与综采工艺有效提高了采煤效率,创造了很好的经济效益,但还需进一步研究爬底式采煤机滚筒可调高技术、如何减少端头开缺口的工作量以及极薄煤层工作面的自动化技术。     

表征PAN纤维和炭纤维微细结构的HRTEM样品制备方法

为用高分辨透射电子显微术(HRTEM)表征聚丙烯腈(PAN)纤维和炭纤维的微细结构，从纤维性能出发，探讨研碎、离子束减薄和超薄生物切片三种制备方法及其工艺步骤，结合实验结果，对比了三种制备方法的原理、优缺点，提出了制备方法的适用范围和选择原则，并推断适于表征预氧化纤维微细结构的样品制备方法。与生物样品的制备方法类似，把超薄生物切片法引入到纤维材料HRTEM样品制备领域，为系统研究炭纤维微细结构的演变提供了线索。     

铁素体区轧制技术的发展与现状

介绍了薄板坯连铸连轧生产中铁素体区轧制技术的特点、优势、发展趋势，以及铁素体轧制工艺在超薄热轧带钢项目中的应用。     

Wide color-range tunable and low roll-off fluorescent organic light emitting devices based on double undoped ultrathin emitters

We demonstrated a novel wide color-range tunable, highly efficient and low efficiency roll-off fluorescent organic light-emitting diode (OLED) using two undoped ultrathin emitters having complementary colors and an interlayer between them. The OLED can be tuned to emit sky blue (0.22, 0.30), cold white (0.29, 0.33), warm white (0.43, 0.42) and yellow (0.40, 0.45) according to the Commission Internationale de L’Eclairage (CIE) 1931 (x, y) chromaticity diagram. The device fabrication was simplified by eliminating doping process in the emission layers. The influence of interlayer thickness on luminous efficiency, efficiency roll-off and color tuning mechanism is thoroughly studied. The recombination zone is greatly broadened in the optimized device, which contributes to stable energy transfer to both emitters and suppressed concentration quenching. With a threshold voltage of 2.82 V, the color tunable organic light emitting diode (CT-OLED) shows a maximum luminance of 39,810 cd/m², a peak external quantum efficiency (EQE) 6% and the efficiency roll-off as low as 11.1% at the luminance from 500 cd/m² to 5000 cd/m². This structure of CT-OLED has great advantages of easy fabrication and low reagent consumption. The fabricated CT-OLEDs are tunable from cold white (0.30, 0.36) to warm white (0.43, 0.42) with correlated color temperature (CCT) 6932 K and 3072 K, respectively, demonstrating that our proposed approach helps to meet the need for lighting with various CCTs.     

基于热管技术的锂离子动力电池热管理系统研究进展

近年来,锂离子动力型电动汽车炙手可热,但它的广泛应用还受限于电池性能、寿命及使用安全等问题。锂离子电池在25～40℃内可高效安全运行,这就需要配备高效的热管理系统以保障整车安全。本文针对锂离子电池,主要综述了包括风冷、液冷、相变材料冷却和热管冷却等热管理技术的研究进展。通过分析研究发现,目前应用的热管理技术不仅在极端条件下冷却能力不足,而且存在结构复杂、体积及质量过大等缺点,既增加了电池的额外能耗,也与汽车轻量化的发展方向相悖。针对于此,本文提出开发超薄型热管的冷却技术,并认为热管和相变材料耦合的热管理技术将有效解决锂离子电池的散热与蓄热问题。     

超薄型钢结构防火涂料的研制及其阻燃机理探讨

以溴碳苯丙乳液为基料,配以聚磷酸铵、三聚氰胺、季戊四醇等助剂,配制了超薄型钢结构防火涂料;解决了现有钢结构防火涂料阻燃时效短的弊端,并对基料的阻燃机理进行了简单的探讨。自制超薄型钢结构防火涂料的各项技术指标均达到或超过了《钢结构防火涂料通用技术条件》中规定的指标。