The analysis and comparison of two novel kinds of focusing elements as reflectors

In this article, two novel kinds of focusing elements as reflectors are analyzed and compared. One is the grooved Fresnel zone plate reflector with continuous phase‐correcting. The other called subzone paraboloid reflector, has the profile that consists of a series of paraboloids. Their diffraction efficiencies and bandwidths are described. The two elements still preserve the advantages of Fresnel zone plates, namely, low profile, high efficiency, and simple fabrication. Two dual‐reflector antennas using the proposed focusing elements as the main reflectors are simulated and the results show that these antennas have good radiation performances. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:101–108, 2015.     

Bandwidth Adaptation Algorithms for Adaptive Multimedia Services in Mobile Cellular Networks

The fluctuation of available link bandwidth in mobilecellular networks motivates the study of adaptive multimediaservices, where the bandwidth of an ongoing multimedia call can bedynamically adjusted. We analyze the diverse objectives of theadaptive multimedia framework and propose two bandwidth adaptationalgorithms (BAAs) that can satisfy these objectives. The firstalgorithm, BAA-RA, takes into consideration revenue and``anti-adaptation' where anti-adaptation means that a user feelsuncomfortable whenever the bandwidth of the user's call ischanged. This algorithm achieves near-optimal total revenue withmuch less complexity compared to an optimal BAA. The secondalgorithm, BAA-RF, considers revenue and fairness, and aims at themaximum revenue generation while satisfying the fairnessconstraint defined herein. Comprehensive simulation experimentsshow that the difference of the total revenue of BAA-RA and thatof an optimal BAA is negligible. Also, numerical results revealthat there is a conflicting relationship between anti-adaptationand fairness.     

EPON媒体接入控制的关键技术研究

文章简要介绍了基于以及太网的无源光网络（EPON）这种新型的接入网技术，将其与基于ATM技术的无源光网络（APON）的优缺点进行了比较，并对其媒体接入控制（MAC）的关键技术测距及上行接入进行了讨论，初步提出了光网络单元（ONU）的软、硬件实现方案。     

接收机有限带宽对多相码数字脉压的影响

限制接收机带宽是雷达系统中提高信噪比(SNR)的常用方法,相应的也会引起输出波形的失真。本文主要分析了多相码数字脉压雷达系统中,接收机有限带宽对脉压输出结果所造成的影响。运用五点滑动窗平均法在计算机上进行了模拟,并给出了仿真结果。     

Engset multi‐rate state‐dependent loss models with QoS guarantee

We consider a single link loss system of quasi‐random input, described by the Engset multirate loss model (EnMLM). Blocked calls may once reattempt to be connected to the system requiring less bandwidth; then the system is described by the single retry model for finite sources (f‐SRM). The EnMLM and the f‐SRM are extended with the single threshold finite source model (f‐STM), where calls may attempt to be connected to the system with less bandwidth requirements, according to the link occupancy, before blocking occurs. We focus on CBP equalization in the EnMLM, f‐SRM and f‐STM, under the bandwidth reservation (BR) policy. For this analysis, we apply two approximate methods, the Roberts' method and the method of reverse transition rates (RTR), which lead to a recursive CBP calculation. We evaluate the accuracy of the above models under the BR policy by comparing the analytical with simulation CBP results, based on the relative approximation errors (RAE). The results are highly satisfactory because they show that the proposed models (formulas) lead to small RAE. Copyright © 2005 John Wiley & Sons, Ltd.     

基于用户兴趣度的校园网带宽管理策略应用研究

针对校园网出口拥塞问题,提出一种基于行为分析的用户兴趣建模方法,通过用户参与时间来衡量并计算不同种类应用的用户访问兴趣度,在用户兴趣度的基础上结合通道管理技术进行带宽管理策略研究,实现动态带宽管理。实施结果表明,该方法能够有效地提高用户的网络满意度。     

分层码率控制策略在机器人遥操作中的应用

为实现卫星自维护遥操作系统中稳定可靠的视频反馈目标,提出一种基于分层码率控制的视频传输策略.利用实时探测到的带宽选择不同码率的视频流分层,使得视频传输对于不同的网络带宽具有自适应性.试验结果表明,该策略能够在波动带宽下给予遥操作者稳定流畅的视频反馈,有效地提高了遥操作系统的视觉临场感性能.     

基于NOMA的5G超密网计算迁移与资源分配策略

针对5G超密网中移动设备计算能力不足、频谱资源有限的问题,提出了一种基于非正交多址接入（NOMA）的计算迁移与带宽分配策略。首先,对系统模型进行了分析,并在此基础上以最小化设备计算代价为目标对所研究的问题进行形式化定义;然后,将该问题分解成设备的计算迁移、系统的带宽分配和设备的分组匹配三个子问题,并利用模拟退火、内点法和贪心算法对这三个子问题进行求解;最后,通过联合优化算法对上述子问题进行交替性迭代求解,最终获得最优计算迁移和资源分配策略。仿真结果表明,所提出的联合优化策略不但优于传统的正交多址接入（OMA）方式,而且能获得比平均分配带宽的NOMA技术更低的设备计算代价。     

A global cutter positioning method for multi-axis machining of sculptured surfaces

Traditional cutter positioning methods have defects of global errors and incomplete optimization. Because of using local differential geometry and focusing on the cutting contact point, these defects cannot be avoided and will deteriorate accuracy in precision machining. The authors presented the conception of actual cutting edge of a toroidal mill which was extended from cutting contact point, and pointed out its importance in programming. Instantaneous cutter position error (ICPE) was also investigated. A new global method based on the ICPE curve was presented. Taking the relationship between surface and cutter into consideration thoroughly, this global method shows many advantages which have been verified by simulation and cutting tests.     

连续型Δ∑调制器设计综述

Δ∑调制器作为数字转换器中重要的类型,以其较高精度及对CMOS工艺演进的更强适应性得到广泛应用.阐述了Δ∑调制器中连续型的Δ∑调制器的主要设计要点,介绍了国内外在连续型Δ∑调制器上的研究现状,并对相应设计方法进行分类总结.分析了连续Δ∑调制器的工作原理、系统结构、电路误差及模型,对其发展趋势以及面临的挑战进行了总结.结果说明合理地利用新工艺及新型积分器可以有效提高连续型Δ∑调制器的带宽及能效.