光电平台无角位移减振机构运动分析

分析了光电平台的工作环境和角振动对成像质量的影响，应用空间机构学原理和减振理论，设计了一种既具减振功能又能抑制角位移的无角位移减振机构。对减振机构的减振机理及运动特性进行了分析，并利用三维建模软件和MSC．Visual Nastran 4D仿真分析软件对该减振机构进行了三雏实体仿真分析，通过输出的仿真数据及曲线检验无角位移减振原理的正确性。     

MOCVD生长薄膜材料制作半导体可饱和吸收镜

介绍了当前国际上流行的用半导体可饱和吸收镜来对固体激光器、光纤激光器和半导体激光器进行被动锁模的方法,阐述了半导体可饱和吸收镜用来作为被动锁模吸收体的原理,并介绍了如何利用金属有机气相淀积(MOCVD)技术生长各种波长激光器所需要的半导体可饱和吸收镜.     

钻井液振动筛叠层筛网透筛率的研究

从理论上详细论述了钻井液振动筛叠层筛网对固相颗粒分离的影响 ,首次提出用透筛率的概念定量地描述这一影响 ,并进行了实例计算。研究表明 ,当上下层筛网随机叠加时对透筛率的影响有以下几种情况 :(1)当上下层筛网开孔尺寸相除的余数为零 ,任意组合叠层筛网的透筛率分别为某一常数 ;(2 )上层筛网目数一定时 ,下层筛网目数越大 ,则透筛率越小 ;(3)上下层筛网的目数相差越小 ,透筛率越小 ;(4 )任意目数的上下层筛网随机叠加后 ,其透筛率仅在一个小范围内变化 ,因此任一叠层筛网有其固有的透筛率属性。     

COMAS制丝线振动输送机的振动分析

本文根据振动理论对卷烟厂ＣＯＭＡＳ制丝生产线上的振动输送机建立了相应的力学模型及其振动方程。通过对振动方程的求解，分析了该振动输送机的振动特点，并提出了主要参数的选取原则，以期减少基础的振动。     

反向回转双激振器振动机控制同步的理论研究

本文对两激振器作反向回转的振动机控制同步进行了理论研究和计算机仿真。推导出了考虑质心偏移时两主轴的转矩差方程，在此基础上建立了控制系统的数学模型，设计了具有鲁棒性的非线性变结构滑模控制器．仿真结果表明，控制同步不仅可以消除由质心偏移、电机特性差等原因引起的稳态相位差，同时还能大大降低瞬态相位差，从而使机体的振动方向保持不变，减小起、制动过程中机体的摇摆振动．     

The mirror effect and mixture signal detection theory.

The mirror effect for word frequency refers to the finding that low-frequency words have higher hit rates and lower false alarm rates than high-frequency words. This result is typically interpreted in terms of conventional signal detection theory (SDT), in which case it indicates that the order of the underlying old item distributions mirrors the order of the new item distributions. However, when viewed in terms of a mixture version of SDT, the order of hits and false alarms does not necessarily imply the same order in the underlying distributions because of possible effects of mixing. A reversal in underlying distributions did not appear for fits of mixture SDT models to data from 4 experiments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

RAID技术综述

通过对各种RAID级别的实现原理进行描述，综合分析了各种模式的性能、优缺点以及应用范围。     

CO2激光器线偏振光输出腔内起偏器的研究

混合InGaAs光电二极管阵列ETX128FPA是16384元InGaAs焦平面阵列,供1.0～1.7μm波段内的近红外成象使用。这种128×128元的二维光电二极管阵列是使用钢冲击结合技术把InGaAs材料结合到高级的CMOS倍增管上而制成的。     

A vibrating-tube densimeter for fluids at high pressures and temperatures

A vibrating U-tube apparatus has been developed for determining the densities of pure fluids and fluid mixtures at 10-200 MPa and 323-773 K. Measured parameters areP,T, andr (period of vibration). Fluids are injected into the U-tube at constantP andT. Three or more reference fluids are used to calibrate the response of the instrument. Fluid mixtures are produced by pumping pure fluids into T-junctions on the upstream side of the U-tube using high accuracy syringe pumps. An automated syringe pump is used to maintainP at setpoint ±0.01 MPa.T is controlled to ±0.01 K using a closed-loop, electronic signal amplification/feedback system. For mixtures, a statistically significant number of measurements of r are obtained to account for the effects of small heterogeneities in fluid composition (generally <0.005X;). Typically, density data for 15 fluids can be obtained in a 6- to 8-h period. Considering all of the potential sources of error in the experimentation, conservative estimates of uncertainty are as follows:P, ±0.02 MPa;T, ±0.05 K;p (pure fluids), ±0.0005g.cm^–3; andp (fluid mixtures), ±0.0005-0.0010g-cm^–3.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.