ANALYSIS OF THE SCATTERING OF RIVET ON AIRCRAFT

This letter investigates the scattering characteristic of the rivets on aircraft.The electric Field Integral Equation (EFIE)is used with the moment to calculate the current distribution on the surface of the rivet.With the application of Gaussian integral corresponding triangular cell,the time to fill the Z matrix is greatly reduced.Finally,the RCS of a type of rivet on aircraft is analyzed.     

色用缓变光纤中交叉相位调制不稳定性分析

从非线性薛定谔方程出发得到了色散缓变光纤（DDF）中交叉相位调制（XPM）不稳定增益谱。研究了增益谱随入纤功率及光纤纵向色散参量的变化关系。结果表明：反常色散区的增益谱宽比正常色散区宽，且峰值增益高：DDF中XPM不稳定增益谱宽比常规光纤的宽，二者的比值随传输距离和光纤色散参量的乘积成指数增长；DDF的反常色散区是产生调制不稳定的较好的色散介质。     

A procedure to prepare cross-sectional samples for TEM

Cross-sectional transmission electron microscopy (XTEM) is an imaging technique particularly suited to the study of layered structures. For integrated electronic devices it has become a common practice to use XTEM to assess the shape and crystallinity of component layers as well as defect structures introduced by processing. A procedure for preparing samples to be viewed by XTEM is described.     

Metathesis as a versatile tool in oleochemistry

Olefin metathesis, awarded with the Nobel Prize in Chemistry 2005 for Chauvin, Grubbs and Schrock, has emerged as a powerful tool for organic as well as polymer chemistry. In oleochemistry, this reaction is well known and has been applied for many decades. Examples include the functionalization of the double bonds of different oleochemicals or the (direct) polymerization of plant oils via metathesis. More recent developments, particularly the development of better and more robust catalysts, allow for highly efficient cross‐metathesis reactions opening new possibilities for the direct introduction of chemical functionalities. Within this contribution, the development of metathesis in oleochemistry will be discussed, covering self‐metathesis as well as more recent developments in the field of cross‐metathesis that lead to desired platform chemicals.     

冷轧厂酸洗机组3号横剪大流量中高压液压系统设计方案探讨

在宝钢２０３０ｍｍ冷轧厂酸洗机组中，为了满足厚规格ＩＦ钢的生产，拟将原有的气动式剪切机改成液压式剪切机。为此，设计了一套中高压大流量的液压系统以满足３号横剪大剪切力（最高达７００ｋＮ）和快速剪切（３秒／次）的需要。由于采用了蓄能器增速回路和二通插装阀控制技术，使该液压系统较传统的剪切机液压系统具有响应速度快、体积小、重量轻、发热少和降低电机能耗等优点。     

堤身的数据采集及断面设计的几点建议

针对堤防设计的基础资料采集和设计优化，提出了一些合理性建议。     

遮掩式低回波金属支架的设计

本文推出了一种具有固定遮掩屏的低ＲＣＳ金属支架系统；介绍了其主要特点及设计方法；计算了该支架了多种数学模型的散射截面分布；试验研究了优化支架模型的散射特性。本文的计算及试验结果对于设计制做产用回波金属目标支架具有重要的参照价值。     

Data requirements for neutron activation: Part I: Cross sections

Existing neutron cross section libraries such as EAF-2003 contain a large number of reactions. Of these only a small proportion are significant in the production of the nuclides that dominate activation quantities such as activity or γ-dose rate at various decay times. These reactions were identified in a recent extensive set of calculations on all the elements and reported in the ‘Activation Handbook’. These 1340 reactions are considered here and the set of reactions with no differential or integral data are listed and prioritised. A set of 339 reactions with very limited possibility of measurement are given; these require further study by theoretical calculations. A set of 100 reactions with either discrepant or no data, that might be measurable are listed and are recommended to be the subject of future experimental work.     

我国企业CIMS系统中技术与组织之间相互关系的实证研究

基于对我国ＣＩＭＳ实施企业的调查，研究了企业的适应ＣＩＭＳ中的技术要求而进行组织创新的四大方向：（１）组织结构纵向的扁平化；（２）组织结构横向的合工精简，（３）建立新的信息中心组织；（４）建立各种类型的跨部门团队。指出了ＣＩＭＳ技术适应企业组织的主要方式；（１）开发设计技术系统时充分考虑企业现有的组织管理状况；（２）开发设计技术系统时充分考虑企业今后经营管理和组织体制的改革方向，最后还分析总结了我     

IRS-P6 LISS-3和Landsat-5 TM两种多光谱传感器影像数据的对比分析

随着载有各种新型传感器的卫星相继发射升空,不同传感器之间的相互比较成了一个研究热点。首先从传感器的轨道特征、光谱范围等方面对IRS-P6 LISS-3和Landsat-5 TM进行了机理方面的对比分析,选取3对同日过空的遥感影像,研究了IRS-P6 LISS-3和Landsat-5 TM遥感数据在可见光-近红外、短红外各对应光谱波段之间的关系,建立TM和LISS-3各波段之间的相互转换公式,与Chander等提出的转换公式进行对比分析。结果表明:实际TM和模拟TM多光谱数据之间具有较强的相关关系,决定系数R²均大于0.97;模拟TM与实际TM的水体指数(MNDWI)和归一化植被指数(NDVI)空间散点分布和实际LISS-3与实际TM的空间散点分布相比,具有更强的相关关系,其决定系数R²有一定提高,散点分布趋于对称。因此,所求的关系转换方程具有较高的精度和有效性,效果优于Chander等提出的转换公式。