Effects of upholstery materials on the burning behavior of real‐scale residential upholstered furniture mock‐ups

Fire spread and growth on real‐scale four cushion mock‐ups of residential upholstered furniture (RUF) were investigated with the goal of identifying whether changes in five classes of materials (barrier, flexible polyurethane foam, polyester fiber wrap, upholstery fabric, and sewing thread), referred to as factors, resulted in statistically significant changes in burning behavior. A fractional factorial experimental design plus practical considerations yielded a test matrix with 20 material combinations. Experiments were repeated a minimum of two times. Measurements included fire spread rates derived from video recordings and heat release rates (HRRs). A total of 13 experimental parameters (3 based on the videos and 10 on the HRR results), referred to as responses, characterized the measurements. Statistical analyses based on Main Effects Plots (main effects) and Block Plots (main effects and factor interactions) were used. The results showed that three of the factors resulted in statistically significant effects on varying numbers of the 13 responses. The Barrier and Fabric factors had the strongest main effects with roughly comparable magnitudes. Foam was statistically significant for fewer of the responses and its overall strength was weaker than for Barrier and Fabric. No statistically significant main effects were identified for Wrap or Thread. Multiple two‐term interactions between factors were identified as being statistically significant. The Barrier*Fabric interaction resulted in the highest number of and strongest statistically significant effects. The existence of two‐term interactions means that it will be necessary to consider their effects in approaches designed to predict the burning behavior of RUF.     

光漂白法制备有机聚合物非线性定向耦合器

研究了用光漂白的方法制备PMMA/DR1聚合物非线性定向耦合器,提出了一种容易的制备方法来得到要求的耦合长度.测量了材料的光学非线性对定向耦合器两臂透过率的影响.实验结果表明由于光学非线性,耦合器的耦合长度随着入射光强度的改变而发生变化.     

一种新型三坐标雷达点迹提取器的设计

在目标信号检测模块的基础上增加了测有计算模块，构成一种新型的单脉冲雷达点迹提取器，显著提高了雷达系统潜在的处理能力。     

直接还原在当代冶金变革中的发展

简述了当代的直接还原现状与方法，论述了直接还原是发展短流程的重要基础，直接还原也是熔融还原法的重要组成，同时分析了发展直接还原与熔融还原是当代世界冶金变革中的重要方向之一，也是中国面向２１世纪的重大任务。     

Chromaticity contour map of the RGB cube: A simple algorithm

A simple algorithm (amenable to spreadsheets) is described for plotting a luminance contour map of the color gamut of an additive‐primary display given the chromaticities of its primaries and screen white. Each contour of the plot represents (in either r,g or x,y coordinates) the polygon of intersection of the RGB cube with a plane of constant Y. Each vertex on a contour is an intersection of 1 of the 12 edges of the RGB cube with the constant‐Y plane. Feasibility of an edge as a vertex of the polygon is tested through comparison of the computed r,g coordinates with functions of the luminosity coefficients of the primaries. By ordering the RGB‐cube edges in a particular way prior to scanning them for feasibility, one is guaranteed to retrieve the vertices of any constant‐Y polygon in convex order. This fact facilitates plotting of the polygons.     

Electrochemical behavior of metallic materials used in seawater—interactions between glucose oxidase and passive layers

Six materials (stainless steel, nickel-base alloy, titanium, chromium, nickel and admiralty brass) are tested in chemical and biochemical synthetic seawaters. The biochemical seawater contains enzymes catalyzing oxidation of glucose (glucose oxidase), simulating the action of natural biofilms. The evolutions of free corrosion potential (Ecor) versus time, and of cathodic and anodic reactions are compared with those obtained in natural seawater. Then, electrochemical behavior is related to semi-conducting properties of passive films. When glucose oxidase is present, increase of Ecor versus time is only reported for materials presenting a n-type semi-conductor passive film, and whose cathodic reaction current is increased. On the contrary, when passive layers are p-type semi-conductors, cathodic and anodic reactions are increased, and lead to a global Ecor constant with time of immersion. It appears that interaction between bacteria, medium and materials includes evolution of semi-conducting properties of passive layers.     

主轴回转精度测试中的多圈数据采集及处理

本文就主轴回转精度测试中的多圈数据采集和处理方法作了探讨。根据提出的方法和改进后的测试系统编制了实用程序,进行了实测,获得了测试结果。     

Hardness-stress-strain correlation in aluminium—A simpler alternative to visioplasticity in metal forming

Local stress and strain variations in the deformation zone can be ascertained by measuring hardness. Hardness is correlated with strain and stress. The expressions discussed later are useful in determining the local variations in stress and strain from hardness measurement. It is a simple method compared to visioplasticity. One can estimate the forces required for a forming process. It helps in the choice of equipment, design of tooling and selection of lubricant for the particular process.     

矢量图形智能判断技术的研究与应用

研究矢量图形识别是建立工程制图自动阅卷与计算机辅助教学系统的基础。由于组成二维矢量图形图元类型的多样化及图形整体位置状态的不确定性，增加了矢量图形的识别与判断难度。结合开发的《三视图智能解答》系统，研究其智能识别与判断技术。系统中引入三视图导航技术，解决了图形整体定位与识别问题。实现了对矢量图形图元素信息的分类和提取，能够对所提取的的信息与标准答案进行智能判断与评定。该方法已在AutoCAD2000环境下使用AutoLISP语言编程实现。