Corrosion behavior of T24, T92, VM12, and AISI 304 steels exposed to KCl–NaCl–K2SO4–Na2SO4 salt mixtures

The corrosion mechanisms of T24, T92, VM12, and AISI 304 steels are studied under the influence of NaCl–KCl, NaCl–Na₂SO₄, and KCl–K₂SO₄ salt mixtures in a dry air atmosphere at 650°C for 15 days. NaCl–KCl was the most aggressive deposit and AISI 304 stainless steel exhibited the highest corrosion resistance. There was no relation between the Cr content of the ferritic steels and their corrosion resistance in NaCl–KCl. In contrast, the resistance of high-Cr steels was better when exposed to NaCl–Na₂SO₄ and KCl–K₂SO₄. The high-Cr and the low-Cr steels were more susceptible to NaCl–Na₂SO₄ and to KCl–K₂SO₄, respectively.     

Improvement of the deflocculating power of polyacrylates in ceramic slips by small additions of quaternary ammonium salts

In this work, we examine the effect of small additions of cationic quaternary ammonium salts (QAS) of different molecular weight on the rheology of an industrial ceramic suspension deflocculated with sodium polyacrylate and sodium metasilicate. The observed shear thinning behaviors obey the typical power law of fluid rheology. In order to characterize the rheological behavior of these slurries, three new parameters are introduced: a low shear rate consistency index and two transient viscosities, distant from the equilibrium, after increasing and decreasing the shear rates. These parameters vary with polyacrylate molecular weight and on additions of small quantities of QAS, which we found to be useful for decreasing the slurry viscosity.     

Nonlinear electrical transport in K-TCNQ at low temperatures

A remarkable nonlinearity has been observed for electric transport in K-TCNQ (potassium tetracyanoquinodimethane) quasi-one-dimensional conductor. The negative differential resistance region appears afterV _m (turn over voltage), beyond which voltage goes down with increase of current. A possible mechanism is discussed in terms of dynamics of charged solitons and domain walls in one-dimensional molecular stacks of these types of crystals.     

Long-chain fatty ammonium quaternaries in papermaking

A series of long-chain quaternary ammonium halogen esters (UKK-chemicals), quaternary dimethyl tallow epoxypropyl ammonium halogens (EPK1), quaternary ditallow methyl epoxypropyl ammonium halogens (EPK2), and EPK2 oligomers (EPK2P) were synthesized. At acidic, neutral, or slightly basic conditions, EPK1-, EPK2-, EPK2P-, and UKK-chemicals operate as cationic chemicals. They can be used, for example, as stock sizings, surface sizings, or fixatives. Stock sizing, surface sizing, and fixative experiments indicate that EPK1-, EPK2-, EPK2P-, and UKK-chemicals function at least as well as or better than the corresponding synthetic chemicals used in papermaking.     

Thermodynamic and kinetic consideration on the corrosion of Fe, Ni and Cr beneath a molten KCl-ZnCl2 mixture

Thermogravimetric (TG) experiments have been carried out to study the kinetics of hot corrosion of Fe, Cr and Ni, covered by a molten KCl-ZnCl₂ mixture of a composition close to the eutectic (50 mol% KCl-50 mol% ZnCl₂). Furthermore binary and ternary phase diagrams were calculated in order to describe the corrosion process. The tests were conducted at a temperature of 320 °C in an atmosphere consisting of argon and oxygen. For iron different stages are observed in a TG curve. They can be attributed to the different reaction steps of iron chloride formation (incubation phase), oxide precipitation (linear stage) and scale formation (parabolic or logarithmic stage). Based on these observations a model, described by Spiegel [A. Spiegel, Molten Salt Forum 7 (2003) 253], is confirmed. For Cr and Ni these stages are not observed. At 8 vol% O₂ only slight oxidation of Cr and Ni was observed accompanied by evaporation of the salt deposit. At 16 vol% O₂ the rate of oxidation increases and the experiments yield a curve that is either parabolic or logarithmic for both Ni and Cr. As a result it is shown that the solubility of iron chloride in the KCl-ZnCl₂ melt is higher than the solubility of nickel chloride and chromium (III) chloride in the KCl-ZnCl₂ melt. This enables a higher diffusibility of iron chloride to the upper region of the melt where a higher oxygen partial pressure (p(O₂)) is present leading to a higher oxidation rate of iron.     

Effect of alkali halides on α-chymotrypsin activity in the plastein reaction

The influence of different alkali halides (LiF, LiCl. LiBr, NaF, NaCl, NaBr, KF, KCl and KBr) on α-chymotrypsin-catalysed plastein synthesis has been studied in aqueous medium at different substrate concentrations. The results showed an enhancing effect on the plastein synthesis enzyme action by the presence of salts, proportional to salt concentration, which was decreased when the substrate concentration was increased. Additionally, these facts allowed the ions to be classified as a function of their activation power (F^? > Cl^? > Br^?: K⁺ > Na⁺ > Li⁺), which was in agreement with the interpretation of the Hofmeister lyotropic series. The influence of the several phenomena produced by the presence of salts in the plastein reaction, such as, salt-substrate interactions and water activity, as well as the presence of deactivated enzyme was also analysed. The obtained results showed that the substrate concentration is the most important factor, and the activating effect of salts could be simultaneously involved with both a structural change on the substrate conformation and a reduction of water activity into the reaction media, enhancing the catalytic capability of the α-chymotrypsin towards a peptide synthesis action.     

二芳基碘鎓盐型阳离子光引发剂的 合成和光引发性能测试

通过两步反应合成了6种二芳基碘鎓盐, 研究了4,4′－二乙酰胺基苯基碘六氟磷酸盐的合成,确定了最佳工艺条件：乙酰苯胺与碘酸钾的摩尔比为2.2∶1.0,15 ml乙酸在25 ℃反应24 h,产率为47.6%。通过应用实验,测试了6种产物的光引发剂性能,对碘鎓盐光引发剂的构效关系进行了探讨。实验证明4种负离子为PF-6和BF-4的产物具有较好光引发性和抗氧阻能力。引入共轭基团的二芳基碘鎓盐其最大吸收波长明显增大,光引发性增强。     

无机盐对新疆油田三元复合驱界面性能影响研究

界面性能对复合驱提高采收率有重大的影响,界面张力越低,洗油效率越高;Zeta电位越高,油水乳状液越稳定。研究了各类无机盐对新疆油田复合驱界面性能的影响。结果显示,Zeta电位的绝对值随着无机盐浓度的增高而增大;无机碱中,碳酸根离子降低界面张力效果最好,氢氧根次之,碳酸氢根最差;阳离子中,钾离子降低界面张力效果最好,其次是钠离子,镁离子会略微提高界面张力,钙离子则会大幅度提高界面张力;阴离子中,与硫酸根相比,氯离子能更好地降低界面张力。通过以上研究,确定了Q站污水处理站外排水更适合三元复合驱配液。     

新型纳米固载杂多酸盐催化剂的制备与应用

采用超声波法制备纳米级杂多酸盐催化剂 ,通过己酸乙酯的合成反应来检验它们的活性。实验表明 ,醇酸比为 1 .1 5∶ 1 ,催化剂用量为反应物总质量的 1 %,反应时间 2 h,反应温度在 92～96°C时 ,己酸乙酯的产率可达 92 %。     

Effects of substituted aromatic heterocyclic phosphate salts on properties,crystallization, and melting behaviors of isotactic polypropylene

Nucleation effects of 2,2′‐methylene‐bis (4,6‐di‐tert‐butylphenyl) phosphate metal salts as a nucleating agent for isotactic polypropylene (iPP) were investigated with differential scanning calorimeter and polarized optical microscope, and their effects on mechanical, optical, and heat resistance properties of iPP were also studied. The results showed that monovalent metal salts of substituted aromatic heterocyclic phosphate such as sodium salt, lithium salt, and potassium salt had a good performance. With 0.2 wt % of sodium salt, lithium salt, or potassium salt incorporated into iPP, the crystallization peak temperature of iPP could be increased by 13.5, 13.6, and 15.0°C, respectively; the mass fraction of crystallinity of iPP could be increased by about 5%; and crystallization rate was enhanced increasingly. Meanwhile the tensile strength and flexural modulus of iPP could be increased by about 10 and 30%, respectively, and the clarity and heat distortion temperature of iPP could also be improved significantly. But bivalent and trivalent metal salts of substituted aromatic heterocyclic phosphate had little effect on properties of iPP. Meanwhile the morphology study showed that the addition of monovalent sodium salt could decrease the spherulite size of iPP significantly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4868–4874, 2006