Neural network-based flight control systems: Present and future

As the first review in this field, this paper presents an in-depth mathematical view of Intelligent Flight Control Systems (IFCSs), particularly those based on artificial neural networks. The rapid evolution of IFCSs in the last two decades in both the methodological and technical aspects necessitates a comprehensive view of them to better demonstrate the current stage and the crucial remaining steps towards developing a truly intelligent flight management unit. To this end, in this paper, we will provide a detailed mathematical view of Neural Network (NN)-based flight control systems and the challenging problems that still remain. The paper will cover both the model-based and model-free IFCSs. The model-based methods consist of the basic feedback error learning scheme, the pseudocontrol strategy, and the neural backstepping method. Besides, different approaches to analyze the closed-loop stability in IFCSs, their requirements, and their limitations will be discussed in detail. Various supplementary features, which can be integrated with a basic IFCS such as the fault-tolerance capability, the consideration of system constraints, and the combination of NNs with other robust and adaptive elements like disturbance observers, would be covered, as well. On the other hand, concerning model-free flight controllers, both the indirect and direct adaptive control systems including indirect adaptive control using NN-based system identification, the approximate dynamic programming using NN, and the reinforcement learning-based adaptive optimal control will be carefully addressed. Finally, by demonstrating a well-organized view of the current stage in the development of IFCSs, the challenging issues, which are critical to be addressed in the future, are thoroughly identified. As a result, this paper can be considered as a comprehensive road map for all researchers interested in the design and development of intelligent control systems, particularly in the field of aerospace applications.     

Robust crossfeed design for hovering rotorcraft

Control law design for rotorcraft fly-by-wire systems normally attempts to decouple the angular responses using fixed-gain crossfeeds. This approach can lead to poor decoupling over the frequency range of pilot inputs and increase the load on the feedback loops. In order to improve the decoupling performance, dynamic crossfeeds should be adopted. Moreover, because of the large changes that occur in the aircraft dynamics due to small changes about the nominal design condition, especially for near-hovering flight, the crossfeed design must be ‘robust’. A new low-order matching method is presented here to design robust crossfeed compensators for multi-input, multi-output (MIMO) systems. The technique minimizes cross-coupling given an anticipated set of parameter variations for the range of flight conditions of concern. Results are presented in this paper of an analysis of the pitch/roll coupling of the UH-60 Black Hawk helicopter in near-hovering flight. A robust crossfeed is designed that shows significant improvement in decoupling perfomance and robustness over the fixed-gain or single point dynamic compensators. The design method and results are presented in an easily used graphical format that lends significant physical insight to the design procedure. This plant precompensation technique is an appropriate preliminary step to the design of robust feedback control laws for rotorcraft.     

Multi-input,multi-output flight control system design for the YF-16 using nonlinear QFT and pilot compensation

Nonlinear quantitative feedback theory (QFT) and pilot compensation techniques are used to design a 2 × 2 flight control system for the YF-16 aircraft over a large range of plant uncertainty. The design is based on numerical input-output time histories generated with a FORTRAN implemented nonlinear simulation of the YF-16. The first step of the design process is the generation of a set of equivalent linear time-invariant (LTI) plant models to represent the actual nonlinear plant. It has been proven that the solution to the equivalent plant problem is guaranteed to solve the original nonlinear problem. Standard QFT techniques are then used in the design synthesis based on the equivalent plant models. A detailed mathematical development of the method used to develop these equivalent LTI plant models is provided. After this inner-loop design, pilot compensation is developed to reduce the pilot's workload. This outer-loop design is also based on a set of equivalent LTI plant models. This is accomplished by modelling the pilot with parameters that result in good handling qualities ratings, and developing the necessary compensation to force the desired system responses.     

Exoatmospheric interception problem solved using output feedback law

Interception problems are often dealt with by separating guidance and autopilot design. Guidance law can be obtained using optimal control theory and autopilot design is performed on a linearized system. In this paper, we introduce a new approach that determines a global guidance and autopilot law, based on direct output feedback design. Application of this method to exoatmospheric interception problem results in good performances. Extension to endoatmospheric case is under investigation.     

Design of a robust controller for a supersonic aircraft using H∞ approach

In this paper an H_∞ optimal, robust flight control system design for a supersonic aircraft has been described. Separate controllers are designed for longitudinal and lateral motions. A general two-degrees-of-freedom controller is proposed, where feedback control is designed for robust performance augmentation, while a series compensator is used to ensure that requisite handling qualities. Three alternative methods to achieve performance robustness have been discussed. The results obtained are very encouraging. It is hoped that this will equip the flight control engineers with an alternative to the conventional methods.     

Robust pole clustering in a good ride quality region of aircraft for matrices with structured uncertainties

This paper presents a general analysis of robust pole clustering in a good ride quality region (GRQR) of aircraft for matrices with structured uncertainties. This region is an intersection of a ring and a horizontal strip, located in the left half-plane, which is a specific non-Ω-transformable region providing good ride quality of aircraft. The paper applies the Rayleigh principle along the norm theory to analyze robust pole clustering within this region since the generalized Lyapunov theory is not valid for non-Ω-transformable regions. Concerned uncertainties are structured/parametric uncertainties, including interval matrices. The results are useful for robust control analysis and design, especially, of robust good ride quality of aircraft, shuttles, vehicles and space station, as well as some industrial systems. An example of the F-16 dynamics for which GRQR is suitable is included to illustrate the results.     

An on-line learning neural controller for helicopters performing highly nonlinear maneuvers

This paper presents an on-line learning adaptive neural control scheme for helicopters performing highly nonlinear maneuvers. The online learning adaptive neural controller compensates the nonlinearities in the system and uncertainties in the modeling of the dynamics to provide the desired performance. The control strategy uses a neural controller aiding an existing conventional controller. The neural controller is based on a online learning dynamic radial basis function network, which uses a Lyapunov based on-line parameter update rule integrated with a neuron growth and pruning criteria. The online learning dynamic radial basis function network does not require a priori training and also it develops a compact network for implementation. The proposed adaptive law provides necessary global stability and better tracking performance. Simulation studies have been carried-out using a nonlinear (desktop) simulation model similar to that of a BO105 helicopter. The performances of the proposed adaptive controller clearly shows that it is very effective when the helicopter is performing highly nonlinear maneuvers. Finally, the robustness of the controller has been evaluated using the attitude quickness parameters (handling quality index) at different speed and flight conditions. The results indicate that the proposed online learning neural controller adapts faster and provides the necessary tracking performance for the helicopter executing highly nonlinear maneuvers.     

飞行仿真系统数据可视化设计与实现

研究飞行仿真系统结果数据可视化,为验证分析飞行仿真系统结果的正确性,需要对仿真系统输出的飞行性能数据进行实时在线观测并与标准数据进行对比分析。针对飞行仿真系统对飞机飞行数据实时观测的需求,设计了一种可实时观测的飞行仿真数据可视化方案。在建立仿真系统模型的基础上,为了提高系统的可靠性和优化数据结构,提出了新的数据结构和曲线生成算法绘制实时曲线,实现了数据的可视化观测,避免了实时绘制过程屏幕的闪烁和曲线出现的锯齿。并结合飞行仿真特点,利用MapX组件技术加载了具有导航台的全国地图,对传统的电子地图显示进行了改进,实现了飞机在地图上的实时航迹观测。仿真结果表明,系统能够实时观测仿真结果并分析系统误差,实现飞行仿真数据的可视化,并可验证飞行仿真系统的正确性。     

Advanced concepts flight simulation facility

The cockpit environment is changing rapidly. New technology allows airborne computerised information, flight automation and data transfer with the ground. By 1995, not only will the pilot's task have changed, but also the tools for doing that task. To provide knowledge and direction for these changes, the National Aeronautics and Space Administration (NASA) and the Lockheed-Georgia Company have completed three identical Advanced Concepts Flight Simulation Facilities.

Many advanced features have been incorporated into the simulators — e g, cathode ray tube (CRT) displays of flight and systems information operated via touch-screen or voice, print-outs of clearances, cockpit traffic displays, current databases containing navigational charts, weather and flight plan information, and fuel-efficient autopilot control from take-off to touchdown. More importantly, this cockpit is a versatile test bed for studying displays, controls, procedures and crew management in a full-mission context. The facility also has an air traffic control simulation, with radio and data communications, and an outside visual scene with variable weather conditions. These provide a veridical flight environment to evaluate accurately advanced concepts in flight stations.     

一种无人机生成平滑航迹方法的研究与实现

无人机在未来战场中占有重要地位,航迹规划直接影响其作战能力。针对无人机航迹规划算法中存在的问题,提出一种生成平滑航迹的方法。该方法解决了直角拐弯、航迹不平滑、规划航迹与实际航迹不一致的问题。最后,通过VC++6.0+mapX5.0编程实现,结果表明了该方法的优势。