High-pressure dc sputtering of High-Tc BPSCCO thin films withTc(0) above 100 K

High-T _c Bi(Pb)-Sr-Ca-Cu-O thin films have been made on single-crystal MgO substrates using high-pressure dc sputtering technique. X-ray studies confirm the crystallinity and highly oriented structure withc-axis perpendicular to the substrate. By optimizing the annealing schedule the formation of the high-T _c phase is stabilized. The best film exhibited superconducting transition temperature with zero-resistance temperature,T _c(0), as high as 101 K. Temperature dependence ofJ _c indicates the presence of Josephson-type weak links.     

LIQUID PHASE TRANSPORT PROPERTIES IN A HIGH PRESSURE PACKED COLUMN

A mathematical model of fluid flow and mass transfer in a packed bed was derived and used to evaluate the liquid phase axial dispersion and mass transfer coefficients under high pressure conditions. The least-squares method was used to evaluate the rate parameters from experimental breakthrough curves, and the agreement between the concentration curves predicted from rate parameters and those measured experimentally was good. Experiments were performed at 20 and 200°C with water as a solvent and nonporous soda-lime glass beads as packing. Although the axial dispersion coefficient was independent of temperature and pressure, the mass transport parameters were found to be pressure dependent.     

高压喷射灌浆技术在下石陂水库除险加固中的应用

通过介绍高压喷射灌溉技术在下石陂水库除险加固中的成功应用,研究了此类病险水库的高喷灌浆防渗结构形式与工程布置,探讨了施工工艺和质量控制问题,供类似工程参考.     

我国火力发电用高压锅炉管现状与需求分析

介绍了我国电力工业发展概况。分析了国内高压锅炉管供需现状。对我国火力发电用高压锅炉管宏观需求进行了预测。分析了火力发电用高压锅炉管的微观特性,指出我国火力发电用高压锅炉管生产行业在新钢种开发、大直径特厚壁高压锅炉管热处理工艺以及产品性能稳定性方面,与钢管技术发达国家相比还存在着差距需要改进。     

高压机电机定子的修复

引言 某厂4#高压机在运行过程中发生相间短路,打开电机端盖,发现定子线圈烧坏一只。该电机型号为TDK-40p2500kW,历年已故障线圈4只,本次故障再损坏线圈1个,定子三相直流电阻已严重不平衡,决定全部更新定子线圈,F级绝缘。     

Performance assessment of solar-powered high pressure proton exchange membrane electrolyzer: A case study for Erzincan

In this study, a performance assessment of a solar-powered high-pressure proton exchange membrane (PEM) electrolyzer for hydrogen production is conducted. The feasibility analysis of photovoltaic systems equipped with a high pressure PEM electrolyzer is presented for a university campus-scale community in Erzincan- Turkey. Variable solar irradiance data sets are utilized to assess the performance of the proposed system. A parametric study is conducted in order to evaluate the influence of some design parameters as well as operating conditions on the efficiency of the system. Efficiency of the overall system in the case of relevant inverter sizing is in the range of 11–12%. An ascent of the number of stacks leads to an increase in production rate which is almost linear by photovoltaic (PV) array size. The results shows that in order to have a higher efficiency, the inverter size should be higher than 0.75% of maximum excess power. The proposed system investigated in this study shows great promise of opening up opportunity to develop the high pressure PEM electrolyzer.     

A new high-pressure clearance seal with flexible laddered piston assembly in oil-free miniature compressor for potential hydrogen applications and investigation on its dynamic sealing efficiency

In this paper, a new flexible laddered piston assembly of clearance seal without any soft seal part was proposed for a long life time run of high-pressure stage in oil-free miniature compressor for potential hydrogen applications. In this assembly, the functions of radial load bearing and gas sealing were undertaken independently by large and small piston. The dynamic sealing performance evaluation was carried out by comprehensively considering the real-time variation of gas properties and piston motion with thermodynamic process in the compression chamber. Simulation study shows that the introduced clearance gap has a great influence on the expansion, compression and discharge process. Leakage through the clearance would lead to the in-cylinder pressure drop during the discharge process and bring about oscillation and earlier closure of the discharge valve. Sealing clearance exert more significant influence on the sealing efficiency in the high-pressure stage compared to sealing length and shaft speed.     

Comparison of polysaccharide degradations by dynamic high-pressure homogenization

The mechanical degradation of polysaccharides was investigated using dynamic high and ultra-high-pressure homogenization (HPH). The objectives were to reduce the molar mass of polymer chains, and simultaneously, the apparent and intrinsic viscosity of polysaccharides in solution. The influence of homogenization pressure (up to 200 MPa) and cycles was compared on polysaccharides with different physical and structure properties: namely, guar gum, hydroxyethylcellulose (HEC), sodium carboxymethylcellulose (Na-CMC), sodium alginate (Na-alginate) and gum arabic. HPH was applied on semi-dilute solutions. The apparent changes in molar mass, gyration radius and intrinsic viscosity were deduced from size exclusion chromatography coupled on-line with multi-angle laser light scattering, differential viscometer detector and differential refractive index detector (SEC/MALS/DV/DRI), while the evolution of the critical overlap concentration (C^∗) was obtained by viscosimetry. A method based on a succession of homogenization cycles and polymer pre-concentration steps was developed to determine the minimum molar mass achieved at constant pressure. Molar mass, and intrinsic viscosity were shown to fall simultaneously while logically C^∗ increased during HPH for all polysaccharides, except gum arabic, probably because of its globular and branched structure. This highlights that the differences of polysaccharide structures and conformation (linear, branched…) exhibit a stronger impact on HPH treatments than polymer charge or molar mass. Finally, via an empirical approach linking the decrease of both molar masses and viscosities, we have evidenced a specific scaling exponent that should characterize the flexibility of the treated polymer (i.e. its ability to be degraded by HPH).     

Emerging techniques for assisting and accelerating food freezing processes: A review of recent research progresses

Freezing plays an important role in food preservation and the emergence of rapid freezing technologies can be highly beneficial to the food industry. This paper reviews some novel food freezing technologies, including high-pressure freezing (HPF), ultrasound-assisted freezing (UAF), electrically disturbed freezing (EF) and magnetically disturbed freezing (MF), microwave-assisted freezing (MWF), and osmo-dehydro-freezing (ODF). HPF and UAF can initiate ice nucleation rapidly, leading to uniform distribution of ice crystals and the control of their size and shape. Specifically, the former is focused on increasing the degree of supercooling, whereas the latter aims to decrease it. Direct current electric freezing (DC-EF) and alternating current electric freezing (AC-EF) exhibit different effects on ice nucleation. DC-EF can promote ice nucleation and AC-EF has the opposite effect. Furthermore, ODF has been successfully used for freezing various vegetables and fruit. MWF cannot control the nucleation temperature, but can decrease supercooling degree, thus decreasing the size of ice crystals. The heat and mass transfer processes during ODF have been investigated experimentally and modeled mathematically. More studies should be carried out to understand the effects of these technologies on food freezing process.