Dynamic Young's modulus and glass transition temperature of selected tropical wood species

Abstract

Dynamic Young's modulus (E _d) of selected tropical wood species, namely Dyera polyphylla, Endospermum diadenum, Cratoxylum arborecens, Alstonia pneumatophora, Macaranga gigantea and Commersonia bartramia, used for the study was measured using the free–free flexural vibration method. Young's modulus from three point bending (E _3pb) and compression parallel to grain (E _cp) was also studied. The results show that the relationship between E _d and E _3pb for all wood species is very significant with the mean value of E _d consistently larger than or sometime equal to E _3pb. Surprisingly, the relationship between E _d and E _cp is not significant except for Alstonia pneumatophora. The dynamic mechanical thermal properties were also investigated using the dynamic mechanical thermal analyser (DMTA). The results showed that the storage modulus of the wood species at –90°C is in the range of 1·48–4·09 GPa with a glass transition temperature ranging from 50 to 70°C.     

The role of interfacial interactions and loss function of model adhesives on their adhesion to glass

The measurement of adhesion and the evaluation of influencing factors are of great scientific and technological importance. There are two distinct viewpoints on adhesion: (i) surface chemistry, and (ii) fracture mechanics. For elucidation of the relative importance of mechanical properties in the bonding of adhesives, the strength of adhesion between model adhesives and glass plates was measured by the wedge cleavage (WC) test method. Copolymers of methyl methacrylate (MMA) with n-butyl acrylate (nBA) and methyl methacrylate with styrene (S) were prepared as model adhesives. The results show that in MMA-nBA copolymers, by increasing the amount of nBA, both the loss function and the adhesion energy of the adhesives increase. However, by increasing the amount of nBA above a certain level, the adhesion strength begins to decrease. In this situation, the cohesive strength of the adhesive dominates the failure mechanism. On the other hand, a decrease in adhesion was expected upon increasing the amount of styrene in the poly(styrene-co-methyl methacrylate) adhesive, because methyl methacrylate, an interactive monomer with glass, is replaced by a non-interacting styrene monomer, while the loss function of the adhesive is almost constant. But our practical adhesion measurement technique was not sensitive enough to detect this adhesion loss.     

28—SOME FACTORS INFLUENCING PUCKERING AND COCKLING IN FULLY FASHIONED GARMENTS

A simple technique for the planning of rib cuffs and welts for fully fashioned garments that is based on the classical knitting geometry of plain and 1 × 1 rib fabrics is described. The effects of cover factor and some common loop ratios at the join of 1 × 1 rib and plain fabrics on puckering at the knitted join and the effects of cover factor and some yam characteristics on cockling in plain-knitted fabrics are given.     

18—OSCILLATING ROLLERS FOR SELF-TWIST SPINNING

A method is described for making self-twist yarns by using rollers that simultaneously rotate and oscillate. The technique provides a substantial improvement over previously known methods. The twisting action of sinusoidally oscillating rollers is examined theoretically and comparison made with twist levels observed experimentally. The resultant understanding enables machine parameters to be selected to give desired twist-cycle-length characteristics in in-phase self-twist yarns.     

Probabilistic modelling of fatigue crack initiation from pits and pit clusters in aluminium alloys

Abstract

A numerical model of crack initiation under high cycle fatigue loading from pits is investigated in this paper. A probability based pit growth model, which takes into account the influence of mechanical cyclic load and particle clusters present in alloys, is used for investigations. Critical pit sizes, calculated using linear elastic fracture mechanics principles, are used to determine the probability of crack initiation for different conditions. The results are critically compared to extract an insight on the parameters that control the pit growth behaviour and thereby the fatigue crack initiation.     

基于漏斗模型的一体化生产计划与仿真系统IP＆S

多年来，小批量、多品种生产的企业生产计划与控制的有效性一直是人们十分重视而又难以解决的问题，本文介绍的基于漏斗模型的一体化生产计划与仿真系统ＩＰ＆Ｓ就是为适应这种需求而研究开发的支撑环境。     

Effect of presence of SiC and operating frequency on the damping behaviour of pure magnesium

Abstract

The objective of the present work was to investigate the effect of presence of SiC reinforcement and the vibration frequency on the overall damping characteristics of pure magnesium. The testing method uses a combination of the modified free – free beam method coupled with a circle fit approach. The effect of frequency on the damping property was studied by adding end masses to the specimen so as to alter the resonant frequency of the suspended beam. In the present study, the results are compared against a monolithic magnesium sample. The results revealed a higher damping capability of the composite specimen at all tested frequencies when compared to monolithic magnesium. Both monolithic and reinforced magnesium showed a progressive decrease in damping with an increase in frequency. An attempt is made to rationalise the damping behaviour of the composite in terms of the presence of a process induced plastic zone at the matrix/particulate interface and the operating frequency.     

Adhesively Bonded Patch Repair of Composite Laminates

Damaged composite laminates repaired using adhesively bonded patches have been studied. A special adhesive element is developed to examine the stress distribution in the bonded region. Utilizing the adhesive element, one is able to incorporate the regular elements in the laminate and patch. It has the advantage of reducing the adhesive bonding problem to a two-dimensional in-plane problem, and avoiding the need for refined meshes in the adhesive. The special adhesive element is derived based on the assumption of constant shear stress through the thickness of the adhesive. The damaged area of the composite laminate is simulated as a hole. The repair efficiency is evaluated by comparing the stress concentration factor in the damaged hole before and after repair. The effects of the thickness, size and material properties of both patch and adhesive on the stress distribution are presented through a parametric study. Numerical results indicate that a stiffer and thicker patch is able to carry higher loads, and, consequently, reduce the load across the damaged area yielding less stress concentration in the damaged hole. For a high shear modulus and thin thickness of the adhesive layer, less loads are transferred to the patch resulting in a high stress concentration in the damaged hole.