Metalorganic chemical vapor deposition of silver thin films for future interconnects by direct liquid injection system

Deposition of Ag films by direct liquid injection-metal organic chemical vapor deposition (DLI-MOCVD) was chosen because this preparation method allows precise control of precursor flow and prevents early decomposition of the precursor as compared to the bubbler-delivery. Silver(I)-2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octanedionato-triethylphosphine [Ag(fod)(PEt₃)] as the precursor for Ag CVD was studied, which is liquid at 30 °C. Ag films were grown on different substrates of SiO₂/Si and TiN/Si. Argon and nitrogen/hydrogen carrier gas was used in a cold wall reactor at a pressure of 50–500 Pa with deposition temperature ranging between 220 °C and 350 °C. Ag films deposited on a TiN/Si diffusion barrier layer have favorable properties over films deposited on SiO₂/Si substrate. At lower temperature (220 °C), film growth is essentially reaction-limited on SiO₂ substrate. Significant dependence of the surface morphology on the deposition conditions exists in our experiments. According to XPS analysis pure Ag films are deposited by DLI-MOCVD at 250 °C by using argon as carrier gas.     

GaN-MOCVD设备反应室流场的CFD数值仿真

采用计算流体力学方法对生长半导体材料GaN的重要设备MOCVD(金属有机物化学气相沉积)反应室中的流场结构进行了三维数值仿真.数值模拟采用基于非交错网格系统的SIMPLE算法,用有限体积方法对控制方程进行离散,并采用改进的压力-速度耦合方法进行求解.数值仿真给出了具有复杂几何结构和运动方式的GaN-MOCVD反应室中的流场结构,研究了改变几何尺寸和运行参数对MOCVD反应室流场结构的影响,对正在试制开发中的MOCVD设备的几何结构的改进和运行参数的优化提出了指导性建议.     

Reliability studies of MOCVD TiSiN and EnCoRe Ta(N)/Ta

Passivated single damascene copper SiO₂ damascene lines were evaluated in combination with TiSiN and Ta(N)/Ta diffusion barriers. Leakage current, breakdown and time-dependent dielectric breakdown properties were investigated on a wafer level basis for temperatures ranging between room temperature and 150 °C. It is found that the leakage performance of the wafers with a TiSiN barrier is better at room temperature, but at 150 °C the performance levels out with Ta(N)/Ta. Time-dependent dielectric breakdown measurements at 150 °C show that the lifetime of the interconnect is higher with the selected Ta(N)/Ta barrier than for TiSiN.     

MOCVD生长薄膜材料制作半导体可饱和吸收镜

介绍了当前国际上流行的用半导体可饱和吸收镜来对固体激光器、光纤激光器和半导体激光器进行被动锁模的方法,阐述了半导体可饱和吸收镜用来作为被动锁模吸收体的原理,并介绍了如何利用金属有机气相淀积(MOCVD)技术生长各种波长激光器所需要的半导体可饱和吸收镜.     

940nm高功率激光二极管及线阵

设计并制作出了940 nm无铝有源区高功率激光二极管和激光条.通过MOCVD法生长出应变量子阱材料,器件显示出极好的性能,100μm条宽的激光二极管最大输出功率达800mW(室温),填充因子为17%的激光二极管条发射功率达32 W.     

高质量ZnO薄膜的退火性质研究

在LP－MOCVD中，我们利用Zn(C2H5)2作Zn源，CO2作氧源，在（0002）蓝宝石衬底上成功制备出皮c轴取向高度一致的ZnO薄膜，并对其进行500℃-800℃四个不同温度的退火。利用XRD、吸收谱、光致发光谱和AFM等手段研究了退火对ZnO晶体质量和光学性质的影响。退火后，（0002）ZnO的XRD衍射峰强度显著增强，c轴晶格常数变小，同时（0002）ZnOX射红衍射峰半高宽不断减小表明晶粒逐渐增大，这与AFM观察结果较一致。由透射谱拟合得到的光学带隙退火后变小，PL谱的带边发射则加强，并出现红移，蓝带发光被有效抑制，表明ZnO薄膜的质量得到提高。     

L~∞（0，1）上一个WeakL~P（0，1）有关的格半范数

本文引进一个定义在Ｌ~∞（０，１）上格半范数ρｐ与一个熟知的格半范数ρ０关系，证明了在Ｌ~∞（０，１）中的序区间上，ρ０－拓扑与ρｐ－拓扑等价，从而证明了（Ｌ~∞（０，１），ρｐ）′的闭单位球是（Ｌ~∞（０，１），ρｐ）′的某个子集的弱－闭包，本文还证明了（Ｌ~∞（０，１），ρｐ）′可看作ＷｅａｋＬｐ（０，１）对偶空间的奇异部一个理想，而且这奇异部可由（Ｌ~∞（０，１），ρｐ）′与一算子族生成．（ｆ）ａｌｌ（ｌ．＼ｎ，ｏｏ（ｊ．）＝ｈｉｌｌｓｉｌｌ）ｔ￣．，ｉｆｆ￣＊（ｔ）ｒｅｓｐｅｃｔｉｖｅｌｙａｌｌ＇ｌ，Ｌ（ｑ，１）ｉｓｔｈｅｐｒｅｄｌｓｌａｌｏｆｔｙｒｅａｋＬＩ＇，ａｌｌｌｌｈ，ｒｌｌｏｌｌ－－ａｔ（，ｌｌｌｉ（＇ｌｌｌｅａｓｌｌｒｅａｌｇａ（ｌ￣ｓ，ａｒｅｐｒｅｓｅｌｌｔａ＇ｔｉｏｌｌｔｌｌｅｏｒｅｎｌｆｆ，ｒｅｌｅｌｌｌｅｌｌｔｓｉｌｌＳａｃ，ａｌｌ（ｌＳ，，．ｉｓｏｆ）ｔａｉｌｌｅ（ｌ．Ｈｏｗｅｖｅｒ，ｉｌｌ［２］，ｉｔｉｓｓｌｌｄｗｎｔｈａｔｔｉｌｅｒｅｐｒｅｓｅｌｌｔａｔｉｏｌｌｔｉｌｅｓｆ）ｒｅｌｌｌｏｆ）ｔａｉｌｌｅ（ｌｉｌｌ［．５］ｉｓｉｌｌ（ｔｏｒｒｅ（？ｔ．Ｉｎｔｈｉｓｎｏｔｅ，ｗｅｄｅ     

In-situ monitoring and control for MOCVD growth of AlGaAs and InGaAs

We have used spectroscopic ellipsometry to perform real-time monitoring during metalorganic chemical vapor deposition growth of AlGaAs (on GaAs) and InGaAs (on GaAs and InP). Optical constants for these materials were obtained up to growth temperatures of 600 to 700°C. This information permits real-time extraction of composition and layer thickness from the raw ellipsometric data at sample rates on the order of 0.5 Hz. We describe closed-loop control of composition and total layer thickness on AlGaAs-based structures, including Bragg reflectors. In-situ data obtained on double-heterostructure quantum-well laser structures demonstrate that spectroscopic ellipsometry is an extremely powerful monitoring and quality-control tool, giving important real-time information on complex structures that would be difficult and time-consuming to obtain after growth.     

The growth and characterization of AlGaAs double heterostructures for the evaluation of reactor and source quality

AlGaAs double heterostructures are grown by low-pressure metalorganic chemical vapor deposition to evaluate the level of oxygen contamination in different trimethylaluminum sources. Effects of arsine purifiers, misoriented substrates, atmospheric exposure of the growth chamber, and possible phosphorus contamination are also studied. Extensive characterization is performed on these films by a variety of methods, including high-resolution x-ray diffraction, photoluminescence (PL), time-resolved photoluminescence, and secondary-ion mass spectrometry. The PL intensities for structures grown with the low-alkoxide grade are reproducibly much greater than those grown with the regular-grade TMA1. The use of AsH₃ purification improves the PL intensity.     

Growth and characterization of GaAs films deposited on Ge/Si composite substrates by metalorganic chemical vapor deposition

We report the results of studies which have been made on heteroepitaxial layers of GaAs and AlGaAs grown by metalorganic chemical vapor deposition on composite substrates that consist of four different types of heteroepitaxial layered structures of Ge and Ge-Si grown by molecular beam epitaxy on (100)-oriented Si substrates. It is found that of the four structures studied, the preferred composite substrate is a single layer of Ge ∼1 μm thick grown directly on a Si buffer layer. The double-crystal X-ray rocking curves of 2 μm thick GaAs films grown on such substrates have FWHM values as small as 168 arc sec. Transmission electron micrographs of these Ge/Si composite substrates has shown that the number of dislocations in the Ge heteroepitaxial layer can be greatly reduced by an anneal at about 750° C for 30 min which is simultaneously carried out during the growth of the GaAs layer. The quality of the GaAs layers grown on these composite substrates can be greatly improved by the use of a five-period GaAs-GaAsP strained-layer superlattice (SLS). Using the results of these studies, low-threshold optically pumped AlGaAs-GaAs DH laser structures have been grown by MOCVD on MBE Ge/Si composite substrates.