基于子波变换的涡街流量传感器信号分析

长期以来 ,如何提取潜在噪声下的涡街流量信号一直是个问题。流体流速脉动 ,局部阻力 ,随机振动———所有这些因素都给解决这一问题带来难度。文章应用子波变换消噪理论 ,从软件滤波的角度分析了强噪声干扰下的涡街流量信号 ,并提出了单支重构计数方法。分析结果表明 ,这种方法对低流速流量计量效果很好 ,能够有效地扩展量程下限     

温度计量技术进展近况

近年来，在把ITS－90更方便地传递到工作用温度计，温度测量仪表采用信息技术和特殊工业场合测温应用方面均取得了一些进展。本文介绍了国内外温度技术在这些方面进展的状况。对温度定点，校验器，热电偶和热电阻测温，辐射测温，光纤测温和信息时代自动化系统中的温度检测仪表的重要进展分别作了介绍。     

基于因特网的远程校准技术进展

远程校准是信息技术特别是计算机网络技术与传统的计量测试技术结合的必然产物。本文介绍与之有关的一些概念及国外开展相应项目的情况。结合我们自己的一个实验装置．对在我国开展远程校准工作的必要性和可行性提出一些看法。     

Metrology of freeform shaped parts

The scope of this keynote paper is to present the state of the art in the metrology of freeform shapes with focus on the freeform capabilities of the most important measuring techniques and on related metrological issues. Some examples of products are presented, for which the metrology of freeform shapes is important to guarantee the desired functional performance of the product. A classification of freeform measuring tasks and the corresponding metrological requirements are presented. A review of the most important measuring techniques is presented along with their capabilities for freeform measuring tasks. Specification and verification of freeform surfaces, including data evaluation and comparison to specifications are discussed, along with the measurement uncertainty and traceability of freeform measurements.     

Ensuring primary realization of pressure unit in the vacuum range without typically utilized static expansion system

After the break-up of Czechoslovakia in 1993 the primary metrological standards authority almost fully remained in Slovakia. So we had to build our primary vacuum metrology anew. But we could do it using uptodate techniques that are more effective and they enable us to fulfil our task more effectively and in a shorter time.The steady demand to widen the lower pressure range and a steady demand for maximal accuracy collide with the financial possibilities open to a small country. So it is impossible to follow the classical pattern for the vacuum standards: liquid columns, static expansion system and dynamic expansion system. But it is possible to utilize contemporary progress in construction of piston manometers. This enables us to discard liquid column and static expansion techniques in favour of piston technique [Tesar J, Prazak D. Vacuum 2002; 67: 311, Tesar J, Prazak D, Krajicek Z. In:Proceedings of international symposium on Pressure and Vacuum, 2003. p. 169, Tesar J, Repa P, Prazak D, Krajicek Z, Peksa L. Vacuum 2004; 76: 491.]. Such system fulfils all the needs of a little industrial country and is economically acceptable.     

Novel miniature integrated optical goniometers

A new principle and arrangement for directly determining the angle of incidence of an optical beam on an object are proposed and demonstrated. The novelty of the approach lies in the realization of a ‘smart object’, which extracts a portion of the incident beam's power into an optical waveguide attached to the object's surface or embedded in its body for converting the angle of incidence into the position of a guided beam with finite lateral extent. This ‘integrated optical light pointer’ beam is accomplished by means of creating additional degrees of freedom on the target in two different ways. While a first type is based on introducing spatial variations of the waveguide thickness, a second type makes use of a chirp of the grating periodicity. The feasibility for practical applications has been experimentally demonstrated by a direct comparison with a commercial high-resolution encoder, resulting in an r.m.s. error of <30′'. Measurements have been performed for chips fabricated based on replicated polycarbonate substrates and with no external optics, showing the great potential of this approach for realizing low-cost yet high-performance miniature goniometers.     

方波扫描路径确定声源声功率误差特性分析

改进了矩形测量面方波扫描路径测量声功率的误差模型 ,以单极子、偶极子及四极子声源为例 ,给出了扫描方向、测量面离声源的距离及扫描线的密度的选取对理论误差的分布图形。分析结果表明 :对选定的测量面 ,在扫描线密度小的情况下 ,通过调整声源离测量面的距离 ,可以在声源近处找到一个最优点或较优点 ,使理论误差为零或很小 ;在绝大多数情况下 ,沿测量面长边扫描误差比沿短边扫描小。     

稀土溶液标准物质的研制

选择7种稀土元素:La、Ce、Sm、Eu、Yb、Lu、Y为研究对象,采用高纯稀土氧化物(≥99 99%)为原料,经ICP MS及ICP AES对纯度进行分析后,分别制备成浓度为1000μg mL的稀土溶液标准物质。采用准确、可靠并能溯源的EDTA络合滴定法进行量值核对、均匀性及稳定性检验。对标准物质的不确定度进行了全面的评定。研制的稀土溶液一级标准物质,总不确定度优于0 6%,稳定性达两年以上。     

A Simultaneous Search Problem

We introduce a new search problem motivated by computational metrology. The problem is as follows: we would like to locate two unknown numbers x,y ∈ [0,1] with as little uncertainty as possible, using some given number k of probes. Each probe is specified by a real number r∈ [0,1] . After a probe at r , we are told whether x≤ r or x \geq r , and whether y≤ r or y\geq r . We derive the optimal strategy and prove that the asymptotic behavior of the total uncertainty after k probes is 13/7 2 ^-(k+1)/2 for odd k and 13/10 2 ^-k/2 for even k . Received November 11, 1996; revised October 2, 1997, and July 13, 1998.