A new wavelet based fault detection,classification and location in transmission lines

This paper deals with the application of wavelet transforms for the detection, classification and location of faults on transmission lines. A Global Positioning System clock is used to synchronize sampling of voltage and current signals at both the ends of the transmission line. The detail coefficients of current signals of both the ends are utilized to calculate fault indices. These fault indices are compared with threshold values to detect and classify the faults. Artificial Neural Networks are employed to locate the fault, which make use of approximate decompositions of the voltages and currents of local end. The proposed algorithm is tested successfully for different locations and types of faults.     

多运营商高铁隧道移动网络覆盖方案

高铁移动网络覆盖是国内三大通信运营商的一个重点,而高铁隧道内移动网络覆盖更是运营商的一大难点痛点。文章根据我国中部省份某高铁线路覆盖规划实例,采用“设备+POI+泄漏电缆”模式,即三家运营商信号源设备通过同一POI(point of interface,多系统接入平台)接入,信号输出到泄漏电缆进行隧道覆盖,隧道口场坪站安装宽频切换天线对隧道外进行延伸覆盖,通过链路预算合理布置各运营商主设备信号源,从而实现隧道到室外的无缝覆盖。最后,根据已有成熟网络覆盖解决方案,对未来5G高铁隧道移动网络覆盖方案进行了探讨。     

Protection of power transformer using multi criteria decision-making

Power transformers are protected by different relays that operate independently. Malfunction of each relay has a major role in reducing the reliability of the protection system. In order to mitigate the main drawbacks of the power transformer relays, an overall protection scheme is presented in this paper. This scheme proposes a novel multi criterion algorithm using decision-making based on fuzzy logic. In this paper the outputs of restricted earth fault relay and a directional check unit, are combined with the output of the differential protection relay. Therefore, problems that are pertaining to independent operation of each relay have been mitigated and the relays cover protection blind spots of each other. The improved power transformer protection (IPTP) scheme enhances the sensitivity and reliability of the power transformer protection. Extensive simulations are used to measure the effectiveness and merit of the proposed IPTP relay. The above efforts result in a multi criteria approach for protection of power transformers.     

多级机站通风新模式和矿井通风技术的新进展

文中详细论述了我国“九五”期间金属矿山在多级机站通风系统改造中涌现出的先进技术 ,反映了我国矿山通风技术的发展现状。同时 ,探讨了矿井通风技术的发展方向 ,对矿井通风系统的改造研究具有一定意义     

正交频分复用技术

增加数据传输速率和提高频谱利用率是对现有通信系统提出的新要求。正交频分复用(OFDM)技术不但能满足这两方面的需要,而且还具有抗多径干扰能力强等优点。着重介绍了OFDM系统的基本原理及其系统模型,指出了OFDM系统需要解决的关键问题。     

300脚MSA 10 Gbit/s Transponder模块

分析了开发10Gbit/sTransponder模块的必然性，介绍了10Gbit/sTransponder模块的原理、特点和参数指标。并且用开发出的两只40km300脚10Gbit/sTransponder模块成功地进行了43km的无误码传输试验和测试。     

不甩线圈的多星形移相变极

对于某些槽数和极数比的多星形移相变极电机,提出与前人不同的是在两种极数下均不甩去线圈的绕组方案,使绕组利用率高,且线圈及其联接都较简单.这种绕组方案在一种极数下并联支路略有不平衡,其所引起的电机定子铜耗的增加是极其有限的,不致影响电机的正常运行.     

Modifizierung des ABSE‐Polycarbosilazans mit Multi‐Walled Carbon Nanotubes zur Herstellung spinnfähiger Massen

Modification of the ABSE polycarbosilazane with multi‐walled carbon nanotubes for the creation of spinable masses An inexpensive method has been found to produce ceramic SiCN‐fibres via the precursor route consisting of five processing steps: synthesis of the polymer, preparation of the spinning mass, melt‐spinning, curing via electron beam and subsequent pyrolysis at 1100 °C in a nitrogen atmosphere. A special solid and meltable fibre polymer, the so‐called polycarbosilazane ABSE, has been developed in the last decade for this purpose. Due to its low molecular weight, an adequate catalytic and thermal aftertreatment was necessary to guarantee a stable melt‐spinning process. This article discusses an alternative way to prepare a qualified spinning mass, i.e. the addition of Multi‐Walled Carbon Nanotubes (MWCNTs) to the ABSE melt. For this purpose a homogeneous dispergation of the MWCNTs in the ABSE matrix is necessary. In this study, spinning masses were fabricated in different ways. By optical analysis and comparison of the level of dispergation in these spinning masses an optimized process for integration of the MWCNTs was identified. The influence of the addition of a dispersing agent is investigated as well. In using a dispersing agent, the level of homogeneous dispersion of the MWCNTs increases whereas the interactions between the particles and the precursor melt decrease. In first spinning experiments a good spinability of the masses were noticed. Thus the addition of MWCNTs represents a new way to modify the ABSE precursor for the melt‐spinning process.     

多孔塑料管材挤出工艺和机头模具

扼要介绍了多孔塑料管材的用途、性能、制造方法、配方、生产工艺和机头模具的设计     

基于增加数据宽度的方法提高访存速度

低效率的访存操作是限制微处理器性能提高的一个关键因素。因此提高访存速度可以有效改善微处理器的性能。提出了一种基于增加数据宽度的方式来提高访存速度的方法。通过使用多字宽存储器来增加数据带宽,降低失效开销的时钟周期,从而达到提高访存效率的目的。