Effects on the crystallite growth behavior of LaPO4 nanopowders and its mechanical properties

The effects of pH of the reaction solution and the concentration of phosphoric acid on the crystal growth behavior of LaPO₄ crystallites were investigated and the mechanical properties of rare-earth phosphates were compared. As a result, the concentration of phosphoric acid of 10% was beneficial to the crystal growth of LaPO₄ nanocrystalline. When the pH value of the reaction solution was 2, the size of LaPO₄ crystallites increased gradually with the increasing reaction temperature, and the smallest crystallite size of 43.27 nm was obtained after heat-treatment at 1000 °C. Simultaneously, the activation energy for crystal growth of LaPO₄ nanocrystalline was relatively lower (26.82 kJ mol⁻¹). With the decreasing radii of rare-earth ions, the hardness, Young's modulus and fracture toughness of the bulk rare-earth phosphates exhibited a reduced tendency, resulted from the increase of porosity under the same preparation process.     

掺Nd纳米ZnO薄膜特性研究

研究了用真空蒸发法在玻璃衬底上制备稀土掺杂纳米ZnO薄膜结构、导电性及光透射性能。结果显示 ,在 5 0 0℃氧化、热处理稀土元素Nd掺杂后能够明显改善纳米ZnO薄膜的结构特性 ,薄膜的晶粒尺寸随掺杂含量的增加而减小。掺Nd使ZnO薄膜的电性能有所改善但使纳米ZnO薄膜的光透射性有所降低。     

纳米技术在中药开发中的应用

本文综述了纳米科技与中药制剂相结合的发展，阐述了纳米中药的概念、特性，介绍了纳米中药的制备技术，另外探讨了收集纳米粒子的方法，最后，着重展望了纳米技术在中药制剂中广泛的应用前景。     

Selective area epitaxy of CdTe

We have performed selective area epitaxy (SAE) of CdTe layers grown by molecular beam epitaxy using a shadow mask technique. This technique was chosen over other SAE techniques due to its simplicity and its compatibility with multiple SAE patterning steps. Features as small as 50 microns × 50 microns were obtained with sharp, abrupt side walls and flat mesa tops. Separations between mesas as small as 20 microns were also obtained. Shadowing effects due to the finite thickness of the mask were reduced by placing the CdTe source in a near normal incidence position. Intimate contact between the mask and the substrate was essential in order to achieve good pattern definition.     

Inside Front Cover: Homeotropic Alignment of Columnar Liquid Crystals in Open Films by Means of Surface Nanopatterning (Adv. Mater. 6/2007)

Columnar liquid crystals (LCs) are found to spontaneously form homeotropically‐aligned films when deposited on surfaces fabricated via friction transfer of polytetrafluoroethylene. The inside cover schematically shows the film structure of a phthalocyanine derivative together with the corresponding X‐ray diffraction pattern (inset). The results, reported on p. 815 by Dmitri Ivanov and co‐workers, indicate that not only are the columns homeotropically oriented but also that they form a single monodomain of macroscopic size. These findings can have an important impact for fabrication of LC‐based organic solar cells.     

纳米陶瓷及其纳米复相陶瓷的研究现状

综述了纳米陶瓷和纳米复相陶瓷的的研究现状．探讨了纳米陶瓷的力学性能及其热喷涂纳米陶瓷涂层存在的问题．分析了纳米复相陶瓷的增韧机理，为纳米陶瓷的研究和应用提供了理论依据。     

聚丙烯/BA原位聚合改性MMT纳米复合材料的DSC分析与力学性能

通过原位聚合制备了聚丙烯酸丁酯 (PBA )改性蒙脱土 (MMT ) ,与聚丙烯 (PP)熔融复合制成PP/MMT纳米复合材料 ,系统地研究了复合材料的熔融、结晶行为和力学性能。结果表明 :随着处理MMT的BA用量的增加 ,PP/MMT纳米复合材料中PP相的结晶度、熔点和结晶温度明显提高 ,结晶速度加快 ;复合材料的拉伸强度变化不大 ,但拉伸模量和冲击强度有显著提高。当BA/OMMT质量比为 1/ 12左右时 ,复合材料的韧性趋于平衡值 ,而拉伸模量出现最大值     

镍/纳米二氧化硅纳米复合镀层耐腐蚀性能的研究

制备了纳米氧化硅镍复合镀层材料,并利用静态浸泡法对纯镍镀层和由镀液中不同微粒含量制备的复合镀层样品的耐蚀性能进行了研究,讨论镀液中纳米微粒含量对镀层抗蚀性能的影响。并用扫描电镜观察镀层的表面形貌。     

纳米氧化镍纤维的制备及表征

利用静电纺丝法,制备出聚乙烯吡咯烷酮(PVP)/四水乙酸镍纤维前躯体,通过焙烧前躯体制备出纳米氧化镍纤维,并用透射电子显微镜(TEM),扫描电子显微镜(SEM),X-射线衍射(XRD)以及热重分析(TG)对纤维进行了表征.