Damage identification in concrete using impact non-linear reverberation spectroscopy

High amplitude non-linear acoustic methods have shown potential for the identification of micro damage in brittle materials such as concrete. Commonly, these methods evaluate a non-linearity parameter from the relative change in frequency and attenuation with strain amplitude. Here, a novel attenuation model is introduced to describe the free reverberation from a standard impact resonance frequency test, together with an algorithm for estimating the unknown model coefficients. The non-linear variation can hereby by analyzed over a wider dynamic range as compared to conventional methods. The experimental measurement is simple and fully compatible with the standardized free-free linear impact frequency test.     

Mechanical damage characterization of glass fiber-reinforced polymer laminates by ultrasonic maps

A method for simultaneous measurement of the thickness and density for Glass Fiber-Reinforced Polymer (GFRP) laminate plates with ultrasonic waves in C-Scan mode is presented in the form of maps. The method uses three different signals in immersion pulse-echo C-Scan mode. The maps obtained based on the density show the heterogeneity of the material at high resolution at the pixel level (1 × 1 mm²) and therefore they represent an efficient tool to assess and evaluate the damage of the composite structures after manufacturing and after an applied mechanical loading.     

Measuring changing strain fields in composites with Distributed Fiber-Optic Sensing using the optical backscatter reflectometer

Background/purposeMeasurements of strains in critical components are often required in addition to finite element calculations when evaluating a structure.MethodsThis paper describes how standard optical fibers, bonded to the surface or embedded in a laminate, can measure strain fields along the entire length of the fiber, using the optical backscatter reflectometer.ResultsA strain field measurement can be much better compared to simulations than the more common single point measurements with strain gauges or Bragg Gratings. Changes of the strain field can be related to damage development and can be used for structural health monitoring. Practical aspects of using the fibers are also discussed.ConclusionDistributed Fiber-Optic Sensing was successfully embedded and bonded to a composite joint. Adhesive damage was identified and the strain field agreed well with FE-Analysis.     

Determination of the uranium enrichment with the NaIGEM code

The traditional method used to non-destructively determine the uranium enrichment with an NaI detector is based on the “enrichment meter principle” (Progress report LA-4605-MS, Los Alamos National Laboratory, NNM, 1970, p. 19), which involves measuring the intensity of the 186 keV line of ²³⁵U by selecting two regions of interest for the peak and the background. This type of method suffers from several limitations, the most limiting of which are the impossibility to make wall thickness correction or to take the inference of foreign radioisotopes into account. The NaIGEM software (A guide for using NaIGEM code, version 1.5 for DOS and Windows, 2001; Nucl. Instr. and Meth. A 458 (2001) 196) was developed to overcome these limitations by calculating the 186 keV line intensity with a fitting procedure. The code was tested in different measurement conditions on the wide variety of certified samples, in particular, on reprocessed uranium and on depleted material with thick steel filters interposed between the source and the detector. The results are presented to illustrate the performance and limitations of the tested version (A guide for using NaIGEM code, version 1.5 for DOS and Windows, 2001). The general performance is good except in the case of low-enriched uranium in thick containers.     

High-Tc dc-SQUID magnetometer and its application in eddy current non-destructive evaluation

We have fabricated and tested a high-T_c dc-SQUID magnetometer patterned on a YBCO thin film deposited on a SrTiO₃ bicrystal substrate. The measurement of noise spectrum at 77 K showed that the magnetometer has a white noise of 333 fT/Hz^1/2 without superconducting shield, corresponding to a flux sensitivity of 14.5 μΦ₀/Hz^1/2. We constructed a test system for eddy current non-destructive evaluation of conducting aluminum plates by using the magnetometer. Flaws over 10 mm below the surface can be clearly identified. By mapping the magnetic field distribution, we can locate the flaw position. The signals caused by flaw were expanded due to the use of double-D type driving coil with a wider central slit. The experimental results confirmed that this test system could operate in a magnetic unshielded environment.     

Non-destructive testing of rock bolts using guided ultrasonic waves

The research outlined in this paper is aimed at the development of a portable non-destructive testing instrument for evaluating the condition of rock bolts. In applications such as coal mine roof reinforcement, the opportunities for rock bolt inspection are currently limited to destructive techniques such as the pull-out test. It is proposed that guided ultrasonic waves can be used to solve this inspection problem, using a pulse-echo test carried out from the free end of the bolt. Suitable test frequencies have been identified through the use of modelling software, and successful laboratory and site trials have been undertaken. The research has shown that the proposed approach is capable of determining the bolt length, and of identifying major defects such as necking, deformation, and loss of resin encapsulation.     

High-frequency ultrasonic testing of young cement-based materials using the ‘prism technique’

A new technique for testing young cement paste and mortar is presented. It is based on a method, which uses unconventional prism-shaped specimens. It involves the precise measurement at fixed intervals of 24 h of the time-of-flight of both compressional and shear waves using high-frequency ultrasound. A water tank was designed that allows for easy coupling and handling of the specimens. Both waves are generated by mode conversion using the same transducer. The echoes from all the specimens were strong, and no signal processing was required. Thus, reliable and repeatable results were achieved using a very basic apparatus. Second-order elastic constants were evaluated, and correlation was made with the porosity and age of mortar. A new standard based on this method is proposed which would help in the making of prediction models for evaluating the strength of cement-based materials.     

Ultra-low noise front-end electronics for air-coupled ultrasonic non-destructive evaluation

Air-coupled ultrasonic inspection has been demonstrated to be a non-contact method of great interest in non-destructive evaluation (NDE) applications. The absence of direct contact or a liquid couplant provides this technique very attractive benefits in front of the well-known and well-developed liquid-coupled ultrasonic inspection systems. A wide range of defects can be detected by means of ultrasound coupled to and harvested from the specimen in absence of contact when using appropriate transducers designed for their operation in air.This paper presents an easy way to integrate air-coupled piezoelectric transducers in conventional ultrasonic NDE equipment. The design of a specific front-end electronics by using an ultra-low noise amplifier enables existing inspection systems to be used for the dry-coupled ultrasonic test of materials and structures. The amplifier provides the receiver with a signal-to-noise ratio large enough for good quality signal processing and imaging. System dynamic ranges of more than 100 dB are achieved.     

Sub-wavelength resolution in air-coupled ultrasound images of spot welds

Resistance spot welds joining steel sheets were examined using air-coupled ultrasound at 1 MHz. Transmission C-scan images were obtained using two axially aligned transducers, with each focused on its adjacent surface of the specimen. Because of the enormous impedance mismatch between air and steel, the transmitted signal was exceedingly weak, requiring several hours to collect an image. Although the air-coupled images resembled the weld shapes as determined by an independent technique, surface topography introduced considerable image distortion. The smearing of the images was substantially less than the 5.9-mm wavelength in steel, with the steepness of the transition between welded and unwelded areas indicating a transverse resolution about 1 mm. Similarities to near-field imaging are mentioned as a possible explanation for the observed sub-wavelength resolution.