五号桩—长堤地区沙河街组砂体储集性及控制因素研究

沙河街组是沾化凹陷东部五号桩-长堤地区重要的储油层系，主要目的层段为沙三段和沙二段。沙三段和沙二段主要发育有浊积扇、水下冲积扇和滩坝沉积体系，在浊积扇、水下冲积扇中发育辫状水道、扇中前缘、辫状水道间以及扇根、扇缘等沉积微相类型，其中辫状水道、扇中前缘砂体物性好，原生孔隙及次生孔隙均较发育，辫状水道间以及扇根砂体物性较差。其储集特征主要受岩性、沉积微相、成岩作用等因素控制，结合该地区实际情况，将沙二段、沙三段储集层划分为好、中、差3种类型。图4表1参7     

On the mechanical behavior of aluminum alloys reinforced by long or short alumina fibers or SiC whiskers

This study was initiated to examine the dispersion of longitudinal and transverse waves in metal matrix composites in order to obtain the dynamic elastic modulus and to evaluate various models for predicting the composite's macroscopic elastic constants from the properties of its constituents. The materials chosen for this investigation were alumina continuous fibers on the one hand and alumina and SiC short fibers on the other hand, all embedded in an aluminum alloy matrix. In addition, some indications have been obtained experimentally for the acoustoelastic effect in the composite.     

Homogenization of hardness distribution and distortion in high pressure gas quenching

Quenching with gases rather than oil or other liquid media has the advantages of reducing the risks concerning health and environment, while simultaneously homogenizing the quenching results and minimizing distortion due to a wide range of possible process parameter variations and the pure convective heat transfer. In this contribution, a coupled solution for increasing homogenization of quenching results within high pressure gas quenching will be presented. In the first stage, an experimental test facility was set up for flow investigations and in the second stage a numerical simulation model was generated. The numerical and experimental results of the flow through the chamber were compared for several boundary conditions. Finally, after complete verification of the simulation, the model may be used to assist in parameter variation for optimization of homogeneous high pressure gas quenching.     

复杂连通区域扫描线填充算法的问题及改进

针对复杂连通区域扫描线填充算法可能出现的重复填充错误，分析了产生错误的原因，并给出了相应的改进办法．从而实现了复杂连通区域的快速正确填充。     

Assessing terrestrial wildlife populations in the Toronto and Region Area of Concern

Beneficial use impairments (BUIs) under the Great Lakes Water Quality Agreement identify environmental issues requiring remedial action within the Great Lakes Areas of Concern (AOCs). We conducted this study to support the assessment of the wildlife component of BUI 3: degradation of fish and wildlife populations. We compared bird and amphibian (frogs and toads) data from the Toronto and Region Conservation Authority’s Terrestrial Long-term Monitoring Program in the Toronto and Region AOC to an adjacent, but otherwise similar, reference watershed, Duffins Creek. Twelve of 13 targets were met within the AOC for forest bird, wetland bird, meadow bird and amphibian populations based on averages of mean annual values at sites within the AOC that were within two standard deviations of averages at sites in the Duffins Creek reference watershed between 2008 and 2017. Even though wildlife populations within the AOC were within the normal range of variability expected from a reference watershed, they were often at lower levels than within the Duffins Creek reference watershed. In addition, forest bird and amphibian populations were negatively affected by urbanization within the AOC and meadow bird indices declined. We conclude that while wildlife populations within the AOC currently meet targets for BUI 3, they continue to be negatively impacted by numerous stressors that are primarily related to past and ongoing urbanization. Thus, continued restoration of wildlife habitat and protection of existing habitat within the AOC is highly recommended.     

5%Si高硅奥氏体不锈钢元素偏析及均匀化处理

 高硅奥氏体不锈钢由于高含量硅元素的加入使其具有优异的耐高温腐蚀性能和较低的成本,在制酸行业有着潜在的应用价值。然而,该合金中高含量硅元素的加入会促进凝固过程中溶质再分配,进而造成显著的元素偏析,最终导致合金内部产生枝晶组织和大量的有害相。对铸锭组织进行均匀化处理能够有效消除枝晶与元素偏析,促进析出相回溶和枝晶消融,从而改善材料的热塑性,有效应对热变形开裂问题。因此,采用金相显微镜(OM)、扫描电镜能谱分析(SEM/EDS)、电子探针(EPMA)、JMatPro软件计算等方法,研究了实验室条件下制备的5%Si高硅奥氏体不锈钢铸锭的显微组织和元素分布状态,通过残余偏析指数、扩散动力学计算并结合均匀化处理试验验证,最终确定了5%Si高硅奥氏体不锈钢合理的均匀化处理工艺。结果表明,5%Si高硅奥氏体不锈钢凝固过程中钼元素偏析最为严重,通过残余偏析指数模型计算得到的均匀化动力学方程可用来指导该成分合金的均匀化处理工艺;5%Si高硅奥氏体不锈钢经过1 150 ℃×12 h均匀化处理后,铸锭内枝晶消融,元素偏析基本消除,析出相与铁素体回溶到基体中,合金转变为全奥氏体组织,热塑性得到改善;当加热温度达到1 250 ℃时,合金出现过烧现象,晶界开始熔化。     

HOMOGENIZATION TREATMENT OF Mg-Al-Zn(MM)MAGNESIUM ALLOY INGOTS

The Mg-Al-Zn series AZ31 and AZ31 MM alloys are homogenized at 673, 723 and 753K respectively. The hardness of alloy ingots at different heat-treated states is measured and the micro structures are observed. The optimum annealing temperature is 723K and the time is 12h.