Progressive damage modelling of SMC composite materials

The present work deals with the modelling of damage behaviour for sheet moulding compound (SMC) composite materials using a finite element analysis package. Specifically, a comparison is made between the results obtained experimentally for a three-point bending test, and those obtained from numerical simulation using a material model already implemented. The simulation has been performed for the material models available within the PAM-CRASH software. The simulation results are compared and validated with respect to experimentation.     

射频识别模块SMC51489在门禁系统中的应用

射频识别系统一般由三部分组成:电子标签(射频卡)、读取器和天线.正确快速的识别电子标签的标签号码,是门禁系统发挥其功能的先决条件.以无源低频射频卡识别模块SMC51489为例,介绍了对射频卡信息读取的原理和方法,并给出了相应的软件编程.实验证明该模块不仅具有较大的读卡距离,而且工作可靠.     

井口信号无线数传系统

目的　介绍了井口信号无线数传系统的设计 .方法　无线数传、低功耗电路设计 .结果　省去了井口信号线 ,降低了井口工作量 .结论　提高了测量精度和可靠性     

优化SMC模压工艺控制制品收缩率和表面粗糙度

优化SMC模压工艺参数：模压压力分为二阶段，选定最佳压力释放时机和压力；适宜降低模压温度。可显著降低SMC制品的固化收缩率，提高其表观质量、试验表明，同时采用的线收缩率和表面粗糙度两种检测和村定方法具有很好的同一性。     

Sheet molding compound characterization using spiral flow

Sheet molding compound (SMC) is a fiber‐reinforced polymeric composite. It is often used in automotive, marine, and industrial applications over other materials because of its high strength to density ratio, resistance to corrosion, and low cost. There is a demand in the SMC industry to be able to characterize SMC processability. This is particularly true for heavy truck body panels, one of the fastest growing applications of SMC. Because of their large size and high strength requirement, the molding forces have a major influence in the molding cycle. Also because of the long flow paths involved, the ability of the paste to carry glass needs to be properly characterized when developing new SMC materials. In this article, we demonstrate the benefits of using spiral flow as a processability tester. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

W—311^#耐腐蚀SMC树脂的开发研究

本文介绍了Ｗ－３１１＾＃ＳＭＣ不饱和聚酯树脂的研制及制品耐水、耐腐蚀性能。实际应用表明，该树脂适合ＳＭＣ成型工艺要求，为优良的耐腐蚀ＳＭＣ树脂。     

复杂SMC零件成型中的CAE技术

对复杂的SMC零件从制品设计到成型的过程中，可利用计算机模拟（CAE）分析进行流动模拟、工艺设计等研究工作，阐明了该技术在复杂SMC零件生产过程中的有效性。     

SMC彩色屋面玻璃钢瓦的研制

通过对SMC彩色屋面玻璃钢瓦与粘土瓦、彩钢瓦、石棉瓦等屋面瓦性能特点与力学性能的对比，可知玻璃钢瓦简述了TSMC屋面瓦材料及其工艺研发，并对SMC屋面瓦应用前景进行简要描述。     

一种用于多方通信的新的SMC安全协议*

对主流安全协议在多方通信环境下的应用进行分析,总结其各自优缺点。在综合各个协议优点的基础上,提出并介绍了一个用于多方通信环境下的SMC(securing multiparty communications)协议,该协议工作在传输层之上,具有更强的可部署性。SMC协议被设计用来取代当前用于多方通信环境的MSEC协议族。通过将SMC协议与MSEC协议族进行比较,证明SMC协议具有与MSEC协议族一致的安全性,并且具有更强的可部署性。     

复合变指数趋近律的永磁同步电机控制

针对变指数趋近律应用在永磁同步电机矢量控制中出现的抖振以及趋近滑模面较慢的问题,提出一种复合变指数趋近律的控制方法。该方法引入变指数并与加权积分复合,变指数趋近律可使其快速趋近滑模面,加快系统的反应速度;再与加权积分增益结合,能消除滑动阶段抖动切换增益严重的问题。依据所提出的方法,设计了速度控制器,并与变指数趋近律进行仿真比较。仿真结果表明:稳态时,系统转速波动小,静态误差低;负载转矩突变时,系统反应迅速,响应时间短,提升了快速响应能力。