Evaluating the mixing performance of a ribbon blender

This paper investigates the effects of processing and equipment parameters of a ribbon blender (i.e. loading method of lubricant, fill level, blade speed and blade design) on magnesium stearate homogeneity. A core sampling technique is used to obtain at least one hundred samples per sampling event, which are extracted throughout the blender and yield a thorough characterization of the entire bed. The results presented here can be used as a guideline to develop appropriate blending processes and characterization protocols for ribbon blenders.     

Schubspannungsbomben in Faserverbunden

Shear Bombs in Fibre Composites Despite an optimum external shape non‐load adapted internal fibre orientation can lead to the formation of shear cracks where crossing tension‐compression principal stress trajectories create localized shear peaks. Trees are subject to those failure because they cannot re‐arrange their fibres after wood formation. Bones can adjust their micro‐structure to changing load conditions and in this way can better control shear failure. The engineer working with fibre composites should be alert to avoid fibre arrangements not following the force flow. Localized shear zones may also form near notches similar to normal notch stresses, however they are not always situated at the contour line of the notch.     

Shear-induced crystallization of poly(phenylene sulfide)

The crystalline morphology of poly(phenylene sulfide) (PPS) isothermally crystallized from the melt under shear has been observed by polarized optical microscope (POM) equipped with a CSS450 hot-stage. The shish–kebab-like fibrillar crystal structure is formed at a higher shear rate or for a longer shear time, which is ascribed to the tight aggregation of numerous oriented nuclei in the direction of shear. The crystallization induction time of PPS decreases with the shear time, indicating that the shear accelerates the formation of stable crystal nuclei. Under shear, the increase of spherulite growth rate results from highly oriented chains. The melting behavior of shear-induced crystallized PPS performed by differential scanning calorimetry (DSC) shows multiple melting peaks. The lower melting peak corresponds to melting of imperfect crystal, and the degree of crystal perfection decreases as the shear rate increases. The higher melting peak is related to the orientation of molecular chains. These oriented molecular chains form the orientation nuclei which have higher thermal stability than the kebab-like lamellae that are developed later. A new model based on the above observation has been proposed to explain the mechanism of shish–kebab-like fibrillar crystal formation under shear flow.     

卸荷裂隙在水利水电工程建设中的危害

卸荷裂隙是对水工建筑物稳定最不利的软弱结构面之一。文中较系统地介绍了这种结构面的特点、分布规律、形成的力学机理、对工程的危害、勘查方法及处理措施。     

In-situ birefringence microscopy of uniaxially stretched metal-polymer laminate

This paper concentrates on revealing the local deformation as a function of applied strain in a polymer coating supported by a plastically deforming and roughening metal substrate. To this end in-situ birefringence microscopy measurements have been executed. The measurements are performed in reflection and an alternative unwrapping scheme for the optical path difference is proposed. From the characterization of PET (polyethylene terephthalate) coated stainless steel it is concluded that strain localization appears below the macroscopic strain at yield and that the surface roughness of the substrate is the driving force of the localization.     

高功率移相器粘接工艺初探

主要介绍了粘接技术在高功率铁氧体移相器上的应用。通过对其工艺途径及关键工序的控制，提出了采用粘接技术完成高功率移相器铁氧体的连接，不仅可以大量地缩短工作时间，而且可以使制造成本大幅度降低。     

Chip geometries during high-speed machining for orthogonal cutting conditions

The originality of this work consists in taking photographs of chips during the cutting process for a large range of speeds. Contrary to methods usually used such as the quick stop in which root chips are analyzed after an abrupt interruption of the cutting, the proposed process photographs the chip geometry during its elaboration. An original device reproducing perfectly orthogonal cutting conditions is used because it allows a good accessibility to the zone of machining and reduces considerably the vibrations found in conventional machining tests. A large range of cutting velocities is investigated (from 17 to 60 m/s) for a middle hard steel (French Standards XC18). The experimental measures of the root chip geometry, more specifically the tool-chip contact length and the shear angle, are obtained from an analysis of the pictures obtained with a numerical high-speed camera. These geometrical characteristics of chips are studied for various cutting speeds, at the three rake angles −5, 0, +5° and for different depths of cut reaching 0.65 mm.     

基于程序升温法保留时间预测的气-质联用系统构建虚拟实验室

在气-质联用技术的理论研究及实验的基础上,采用Flash 8.0和ActionScript 2.0编程技术构建开放式网络气-质联用系统虚拟实验室。以若干有机物为考察对象,根据程序升温色谱法(PTGC)中保留值与温度及流速的关系,构建了不同色谱分析条件下保留参数的预测模型,同时利用Flash组件技术,构建与虚拟实验配套的气-质联用系统虚拟工作站。     

Model test of helical angle effect on coal loading performance of shear drum

The work presented in this paper focuses on improving coal loading performance of shear drum.Employing the similarity theory,we carried out a dimensional analysis of the correlation parameters which in...