用流延法制备优质陶瓷基片的研究

本文概括了流延成型工艺的现状，介绍了有机基流延成型工艺中溶剂及添加剂的作用和选择原则，同时介绍了几种新的流延成型工艺。     

Surface Preparation of Aluminum Nitride for Metallization: Effect of Temperature on Surface Reactivity

The current aqueous cleaning step in the surface preparation of aluminum nitride (AlN) prior to metallization causes performance and reliability issues for the substrates used for microelectronic packaging due to surface reactions. These issues limit the use of AlN and its replacing of BeO, an environmentally hazardous material currently used. The aim of this investigation was to determine the effects of different solutions on the surface of AlN substrates under varying conditions at times up to 2419.2 ks (28 days). Concentration of the solutions, temperature, and immersion time were varied for the AlN samples in the solutions. Both elevated temperatures (50°C and 90°C) and low temperatures (5°C) were investigated.

Four general types of behavior were observed: minor changes in average surface roughness and microstructure, linear change in average surface roughness and pitted grains, nonlinear change in average surface roughness and product formation on AlN surface, and miscellaneous change in average surface roughness with surface product formation.

The surface roughening kinetics were very complex due to changes in both the reaction product morphology and reaction mechanism with temperature, solvent, and pH for a specific solvent. Minor changes in average surface roughness and microstructure were observed for HCl pH = 5, H₂ SO₄ pH = 5, NaOH pH = 8, NaOH pH = 10, NaOH pH = 12, deionized water and Alfred tap water at 5°C, HCl pH = 3 and oleic acid at 50°C and citric acid and oleic acid at 90°C. Linear changes in average surface roughness and pitted grains were observed for HCl pH = 2 and H₂SO₄ pH = 3 at 50°C and HCl pH = 2, H₂SO₄ pH = 3, and deionized water at 90°C. Non-linear change in average surface roughness and product formation on AlN surface was observed for HCl pH = 5, NaOH pH = 8 and Alfred tap water at 50°C and HCl pH = 5 and H₂SO₄ pH = 2 at 90°C. Miscellaneous changes in average surface roughness with surface product formation were observed for H₂SO₄ pH = 2, H₂SO₄ pH = 5, NaOH pH = 10, NaOH pH = 12, citric acid, Micro-90 and deionized water at 50°C and HCl pH = 3, H₂SO₄ pH = 5, NaOH pH = 8, NaOH pH = 10, NaOH pH = 12, Micro-90 and Alfred tap water at 90°C.     

Porous ceramics with tailored pore size and morphology as substrates for coral larval settlement

The growing demand for stony corals as ornamental aquarium animals requires defined aquacultural breeding strategies. For the sexual propagation of corals, material substrates are needed, that attract larvae and support their settlement and development. In this study, five types of highly porous ceramic materials were developed following the example of coral skeleton. The applicability of these settlement substrates was tested using larvae of the stony coral Pocillopora damicornis. Partial sintering of pressed clay pellets, freeze casting of clay and alumina-mullite based slurries and direct foaming of high alkane phase emulsified suspensions (HAPES) using alumina were employed. By the addition of mm-sized spherical polystyrene beads as sacrificial templates during freeze casting (alumina-mullite), superficial pores in the size of the larvae were created. The inorganic substrates featured open porosities between 35% (pressed clay) and 83% (foamed alumina), pore sizes ranging from nm to mm-scale and pore morphologies dominated by interparticle porosity (pressed), lamellar pores (freeze casting) and cellular pore types (direct foaming). The ceramic substrates were incubated in artificial sea water for 3 months to induce necessary biofilm formation and algae growth. Afterwards, individual substrates were exposed to 5 coral larvae, and their settlement behavior was monitored over 14 days. At the end of this period, all ceramic materials were successfully accepted as settlement substrates, with a mean settlement rate of 46.2%, and no significant differences between the substrate types. On samples with large surface superficial pores, a significantly reduced survival of settled larvae (79%) compared to the other porous materials (93–98%) was determined, suggesting a non-ideal surface topography. While alumina foam samples (HAPES) exhibit the most promising results in terms of settlement and survival of larvae, clay-based substrates provide a more economic solution for the sexual propagation of corals in aquaculture.     

Modified BCZN particles filled PTFE composites with high dielectric constant and low loss for microwave substrate applications

The modified 0.7Ba (Co_1/3Nb_2/3)O₃-0.3Ba(Zn_1/3Nb_2/3)O₃ (BCZN) powders filled PTFE composites were synthesized by hot-pressing. The influences of BCZN content on the microstructure, dielectric, thermal, mechanical properties and moisture absorption were investigated systematically. The modified BCZN powders filled PTFE composites exhibited better microstructure and dielectric properties compared with untreated powders. Various mathematic models were utilized to predict the dielectric constant of different composites and the effective medium theory (EMT) showed perfect consistency with the experimental results. The modified BCZN/PTFE composites possess the best comprehensive properties at the powders content of 50 vol% with high dielectric constant (ε_r) of 7.7, low loss (tanδ) of 0.0014, acceptable temperature coefficient of dielectric constant (τ_ε) of −125.6 ppm/°C and temperature coefficient of resonant frequency (τ_f) of 29.4 ppm/°C at 7 GHz, low moisture absorption of 0.07% and low coefficient of thermal expansion (CTE) of 33 ppm/°C. All the results show modified BCZN/PTFE composites are the potential materials for microwave substrate applications.     

Antioxidant activities and contents of polyphenol oxidase substrates from pericarp tissues of litchi fruit

The experiments were performed to extract and purify substrates for polyphenol oxidase (PPO) from pericarp tissue of postharvest litchi fruit. Two purified PPO substrates were identified as (−)-epicatechin and procyanidin A2. The antioxidant properties of two PPO substrates were further evaluated in the present study. Variation in the content of the major substrate (−)-epicatechin of litchi fruit during storage at 25 °C was analysed using the HPLC-UV method. The results showed that (−)-epicatechin exhibited stronger antioxidant capability than procyanidin A2, in terms of reducing power and scavenging activities of DPPH radical, hydroxyl radical and superoxide radical. Furthermore, (−)-epicatechin content in pericarp tissue tended to decrease with increasing skin browning index of litchi fruit during storage at 25 °C. Thus, these two compounds can be used as potential antioxidants in litchi waste and the fresh pericarp tissue of litchi fruit exhibited a better utilisation value.     

湿地系统中植物和基质对重金属去除贡献的研究现状

我国重金属离子污染问题突出,其为污水中难降解物质,采用传统方式无法有效去除。国内外研究成果表明人工湿地在对重金属离子污染去除技术中有着不可替代的作用,具有净化能力强、抗逆性、运行费用低等优势,在处理重金属污染中具有很大的发展潜力。主要介绍了人工湿地去除重金属污染的机理;阐述了国内外有关人工湿地去除重金属的研究现状,主要介绍湿地中基质和植物对重金属去除的贡献研究以及各因素的相关性研究;最后简单介绍了人工湿地处理含重金属废水的发展前景。     

On the Growth and Microstructure of Carbon Nanotubes Grown by Thermal Chemical Vapor Deposition

Carbon nanotubes (CNTs) were deposited on various substrates namely untreated silicon and quartz, Fe-deposited silicon and quartz, HF-treated silicon, silicon nitride-deposited silicon, copper foil, and stainless steel mesh using thermal chemical vapor deposition technique. The optimum parameters for the growth and the microstructure of the synthesized CNTs on these substrates are described. The results show that the growth of CNTs is strongly influenced by the substrate used. Vertically aligned multi-walled CNTs were found on quartz, Fe-deposited silicon and quartz, untreated silicon, and on silicon nitride-deposited silicon substrates. On the other hand, spaghetti-type growth was observed on stainless steel mesh, and no CNT growth was observed on HF-treated silicon and copper. Silicon nitride-deposited silicon substrate proved to be a promising substrate for long vertically aligned CNTs of length 110–130 μm. We present a possible growth mechanism for vertically aligned and spaghetti-type growth of CNTs based on these results.     

水辅助自组装法制备漆酚锆聚合物多孔膜

以漆酚锆聚合物为成膜物质,采用水辅助自组装法制备漆酚锆聚合物多孔膜,用扫描电镜观察其形貌,并研究溶剂、湿度及基板润湿性等对膜形貌的影响。结果表明:当溶剂的配比(体积比)为3:2、环境湿度为85%、潮湿气体流速为400mL/min、聚合物浓度为10.0mg/mL,多孔膜的孔呈圆形且分布均匀,其孔径为0.5~1.0μm。     

Three-Parameter Model for Debonding of FRP Plate from Concrete Substrate

Concrete beams retrofitted with bonded fiber reinforced plastic (FRP) plates often fail by debonding of the plate from the concrete surface. To predict the failure load in design, a proper debonding model is required. As debonding is a nonlinear process involving material softening, it can be analyzed once the interfacial shear (τ) versus sliding (s) relationship is known. Recent experimental results indicate that the simplest τ-s relationship should involve three parameters: the maximum shear stress for debonding to initiate, the initial residual stress right after debonding occurs, and a parameter governing the reduction of shear stress with sliding. In this paper, a FRP debonding model based on these three parameters is developed. The applicability of the model is verified through comparison with experimental results. Through a systematic parametric study, the effect of various material and geometric properties on the debonding process is investigated. Implications to the design of FRP strengthened members are highlighted.     

Relaxation of extrinsic and intrinsic stresses in germanium substrates with silicon films

Si films were deposited on Ge substrates at 400°C by two different Physical Vapor Deposition techniques: (A) ion beam sputtering and (B) magnetron sputtering. The intrinsic stresses in the as-deposited films were measured to be compressive and much greater in samples (A), about −1500 to −2000 MPa than in samples (B), about −300 to −500 MPa. The substrates were subsequently exposed to thermal treatments for varying times at 800°C. In the lower stressed (B) samples, the films had relaxed and reduced the overall curvature of the structure whereas in the high stresses (A) samples, an irreversible large increase in the substrate curvature was found to occur. This indicated that plastic deformation in the Ge substrates itself had occurred.