Mathematical model of critical implant stress testing in the weld metal of API 5L X80 steel

In this paper the influence of heat input and preheat temperature on the critical implant stress was analyzed for the weld metal of API 5L X80. High strength steel marked as API 5L X80 is produced with a thermo – mechanical controlled process (TMCP), its chemical composition shows low carbon content due to which the steel has good weldability, but in the weld metal zone cold cracking can occure. The goal of this paper is to define optimal work conditions in form of flux cored arc welding (FCAW) welding parameters at which no cold cracks can be found. The experiment was conducted using central composite design (CCD) and design of experiments (DoE) with two independent variables (preheat temperature and heat input). Mathematical models were developed for all three different wire types that were used (two rutile, one basic flux cored wire). The samples in this paper which had cold cracks were further analyzed on the scanning electron microscope (SEM).     

Effect of friction stir welding process parameters on the tensile strength of dissimilar aluminum alloy AA2024-T3 and AA7075-T6 joints

This work investigates the influence of friction stir welding parameters on the mechanical properties of the dissimilar joint between AA2024-T3 and AA7075-T6. Experiments are conducted consistent with the three-level face-centered composite design. Response surface methodology is used to develop the regression model for predicting the tensile strength of the joints. The analysis of variance technique is used to access the adequacy of the developed model. The model is used to study the effect of key operating process parameters namely, tool rotation speed, welding speed and shoulder diameter on the tensile strength of the joints. The results indicate that friction stir welding of aluminum alloys at a tool rotation speed of 1050 min⁻¹, welding speed of 40 mm/min and a shoulder diameter of 17.5 mm would produce defect less joint with high tensile strength.     

Entwicklung von Werkstoffmodellen zur Beschreibung der lokalen Eigenschaften der Wärmeeinflusszone von hochfesten Feinblechen

The analysis of the complete process chain is an important requirement in the fine sheet metal working for the improvement of strength evaluation of structures and components. Particularly at applications of high‐strength steel sheets the development of material properties as well as the production process play a decisive role, because of the complex requirement profile these steels have to satisfy. In the context of the represented research the material reactions were experimental examined on the basis of the thermal effect of different joining processes at multiphase steel. The investigations were accomplished on HCT600XD, HCT780XD, SZBS800 and LH800. Exemplarily the article discusses the procedures and the results of the research of HCT600XD and SZBS800.     

Effect of process parameters and talc ratio on hot plate welding of polypropylene

This study analyzes the influence of different talc ratios on weld strength of polypropylene joined with hot plate welding process. It further determines the optimum welding parameter settings to achieve the optimum weld strength and observes the effect of process parameters, namely plate temperature and heating time on the joint quality. Process parameters were considered as variables and their effect, interactions and relative significance were investigated by utilizing design of experiment. Simultaneously, a mathematical predictive model of the weld strength was developed in terms of welding parameters. The model can predict effectively weld strength with a 95% confidence level.     

Effect of hot extrusion parameters on microhardness and microstructure in direct recycling of aluminium chips

Direct hot extrusion is an alternative process for recycling aluminium without melting the scrap. It utilizes low energy and is environmental friendly. This paper reports the microhardness and microstructure of aluminium alloy chips when subjected to various settings of preheating temperature and preheating time in hot extrusion process. Three values of preheating temperature are taken as 450 °C, 500 °C, and 550 °C. On the other hand, three values of preheating time were chosen (1 h, 2 h, 3 h). The influences of the process parameters (preheating temperature and time) are analyzed using design of experiments approach whereby full factorial design with center point analysis are adopted. The total runs are 11 and they comprise of two factors of full factorial design with 3 center points. The responses are microhardness and microstructure. The results show that microhardness increases with the decrease of the preheating temperature. The results also show that the preheating temperature is more important to be controlled rather than the preheating time in microhardness analyses. The profile extrudes at 450 °C and 1 hour has gained the optimum microhardness and it can be concluded that setting temperature at 550 °C for 3 hours results in the highest responses for average grain sizes in analysis of microstructure.