氨氮监测中样品蒸馏预处理对结果的影响分析

氨氮监测采用预蒸馏处理后，比色测定结果明显偏低。在样品预蒸馏处理过程中，硼酸作为吸收液，使显色时溶液pH值偏低，导致显色不充分是其主要影响因素。通过采取增加显色剂加入量的方法，解决了显色pH值偏低的问题，得到满意的测定结果。     

吸收雷达波包装材料的研究进展

论述了吸收雷达波包装材料的基本组成及其选择原则，在此基础上讨论了吸波材料的吸波原理及影响吸波性能的因素，并指出了吸波包装材料的开发现状和应用进展及其发展万向。     

Production and properties of micro‐porous glas bubble zinc and aluminium composites

Micro‐porous syntactic foams were produced by means of integration of glass bubbles into aluminium and zinc matrices. Preforms of glass bubbles were pressure infiltrated with the alloys AlSi9Cu9 ans ZnAl4Cu using squeeze casting. The preforms were sintered thermically without the use of bonding agents. Using the combination of different sintering steps syntactic foams with locally different densities could be produced. The mechanical properties of the foams were tested indicating a high compression strength of the foams and a very good compression energy absorption. Furthermore, corrosion behaviour and behaviour at higher temperatures were investigated.     

频域吸收边界条件的构造理论

在频域中推导了适用于差分类数值方法的吸收边界条件的构造方法，并通过选取不同参数导出了几种现有的吸收边界条件。在计算了一般形式的吸收边界条件的反射系数之后，提出了一种简单实用的自适应吸收边界条件。     

An extension of the Secant Method for the homogenization of the nonlinear behavior of composite materials

We discuss the consequences of a different application of the principle the Modified Secant Method is [C. R. Acad. Sci. Paris Sér. IIb 320 (1995) 563] based on. In fact, we directly compute the second-order averages of the local fields available from the linear elastic homogenization procedure exploited in order to evaluate the effective elastic moduli. This method, which can be seen either as a simplification of the Modified Secant Method or as an extension of the Secant Method [J. Mech. Phys. Solids 26 (1979) 325], may be useful for any composite whose overall elastic constants need to be estimated by modeling the microstructure through Morphologically Representative Patterns [J. Mech. Phys. Solids 44 (1996) 307], which is for instance the case of syntactic foams [Int. J. Solids and Structures 38/40-41 (2001) 7235]. In order to show the accuracy of the proposed method, we apply it to several examples and compare its results with those obtainable by means of other analytical methods available in the literature, with numerical results of Finite Element simulations, and with experimental results. Closed-form solutions are derived for the effective yield stress of porous metals and incompressible composites reinforced with rigid spheres.     

电容器介质吸收电流的测量和表征

在外电场作用下，电容器介质的吸收电流和漏电电流混杂而难以分开，但外电场除去后吸收电流对电容器放电总电荷所贡献的百分比具有确定值，吸收电流的释放遵从自由弛豫规律。可用响应时间ｒ’表征。实验给出了一些常见介质的吸收电流表征参数。     

Effects of rapid solidification on the phase structures and electrochemical properties of a V3TiNi0.56Co0.14Nb0.047Ta0.047 alloy

The crystal structures and electrochemical properties of a V₃TiNi_0.56Co_0.14Nb_0.047Ta_0.047 alloy prepared by the melt-spinning method were studied. The rapidly solidified alloy consists of a major Vanadium-based solid solution phase and a secondary Ti₂Ni-based phase. The secondary phase exists between the dendritic arms of the major phase, showing a typical eutectic characteristic. With increasing cooling rate, the amount of the secondary phase decreases but the lattice parameters of both the major phase and the secondary phase show no obvious change. Because the disappearance of the catalytic effect of the secondary phase, the rapidly solidified alloy shows bad electrochemical properties except cycle stability.     

磁性纤维随机混合媒质等效电磁参数的计算

为计及强散射偶极子间的相互作用,引入参量εh和μh,利用广义多重散射理论及MATLAB计算机软件对在2 GHz～18 GHz频率下的体积占空比为8%的铁纤维随机混合媒质等效磁导率的实验值进行曲线的拟合,导出了耦合系数εh和μh,并在此基础上,对体积占空比分别为30%和20%的铁纤维随机混合媒质等效磁导率进行了计算,计算结果与实验吻合良好.     

淀粉丙烯酸接枝共聚吸水性树脂的研究进展

基于淀粉丙烯酸接枝共聚作为吸水性树脂具有环保和可生物降解的优良特性 ,目前 ,人们普遍关注的是如何提高其吸水性 ,抗温性 ,控制水份释放 ,压力下保水 ,以及电解液的吸收等。这些特性的改进将使产品的用途更为广泛 ,可以预见 ,淀粉丙烯酸接枝共聚作为吸水性树脂具有广阔的应用和发展前景。