可拆装高架火炬的应用

结合工程实例,介绍了我国第一座可拆装高架火炬的基本原理及组成,并对可拆装高架火炬与普通高架火炬在安全、技术、安装、维修、占地面积、投资等方面进行了比较,还分析了高架火炬未来的发展趋势.     

Effect of epitaxial realignment on the leakage behavior of arsenic-implanted,as-deposited polycrystalline Si-on-single crystal Si diodes

When dopants are indiffused from a heavily implanted polycrystalline silicon film deposited on a silicon substrate, high thermal budget annealing can cause the interfacial “native” oxide at the polycrystalline silicon-single crystal silicon interface to break up into oxide clusters, causing epitaxial realignment of the polycrystalline silicon layer with respect to the silicon substrate. Anomalous transient enhanced diffusion occurs during epitaxial realignment and this has adverse effects on the leakage characteristics of the shallow junctions formed in the silicon substrate using this technique. The degradation in the leakage current is mainly due to increased generation-recombination in the depletion region because of defect injection from the interface.     

Development of temperature compensated high elongation resistance strain gauges for use up to 250°C

The paper describes the development and evaluation of temperature compensated high elongation resistance strain gauges for use from room temperature to 250°C. These gauges could be temperature-compensated on steels with coefficient of thermal expansion α = 11 ppm/°C. Thermal output within 250°C was about 1 μm/m/°C and maximum standard deviation of 5 gauges was 34 μm/m. Strain limit was > 4% at room temperature and at 250°C. Gauge factors of different strain ranges at R.T. and at 250°C are tabulated. Some applications are stated.     

电化学方法研究碳钢高温水体系中的氢扩散和渗透

本文应用Devanathan渗透装置的原理,设计了一套能用于测量碳钢-高温水体系中氢在碳钢中的扩散和渗透的实验装置,找出了该装置用于测量的最佳工作参数,并用该装置测量了373—473K下氢在碳钢中的扩散系数和扩散速率,讨论了氢在碳钢上还原的机理。     

室温固化高温使用环氧胶粘剂的进展

本文介绍了室温固化高温使用环氧胶粘剂的主要成份、结构、性能及其特点，并对其存在的问题及未来的发展趋势化了简述．     

新己烯的合成研究

采用加压方法,在无水AlCl3催化和少量助催化剂作用下,以乙烯、叔丁基溴为原料合成新己基溴;实验表明300g叔丁基溴,在35g催化剂的催化下,最佳的反应条件是150mL正己烷作溶剂,反应压力控制在0.9～1MPa、反应时间为2h,产物卤代新己烷的收率达到88%;N-甲基吡咯烷酮为溶剂,采用反应精馏的方法,溴代新己烷脱溴化氢制备新己烯,直接可得到纯度达98%的产品。溶剂和溴元素可以循环使用,节省了原料和减少了污染。     

Induced Defensive Response of Myrtle Oak to Foliar Insect Herbivory in Ambient and Elevated Co2

The rising level of atmospheric CO2 has stimulated several recent studies attempting to predict the effects of increased CO2 on ecological communities. However, most of these studies have been conducted in the benign conditions of the laboratory and in the absence of herbivores. In the current study, we utilized large octagonal chambers, which enclosed portions of an intact scrub-oak community to investigate the interactive effects of CO2 and insect herbivory on myrtle oak, Quercus myrtifolia. Specifically, we assessed the effects of ambient and elevated CO2 (2x current concentrations) on percent foliar nitrogen, C:N ratio, total relative foliar tannin content, and the presence of leaf damage caused by leaf mining and leaf chewing insects that feed on myrtle oak. Total foliar N declined and C:N ratios increased significantly in oaks in elevated CO2 chambers. The percentages of leaves damaged by either leafminers or leaf chewers tended to be lower in elevated compared to ambient chambers, but they co-occurred on leaves less than expected, regardless of CO2 treatment. Leaves that had been either mined or chewed exhibited a similar wounding or defensive response; they had an average of 25 and 21% higher protein binding ability, which is correlated with tannin concentration, compared to nondamaged control leaves, respectively. While the protein-binding ability (expressed as total percent tannin) of leaves from elevated CO2 was slightly higher than from leaves grown in ambient chambers, this difference was not significant.     

地聚物砂浆高温后抗拉和粘结性能及退化机理

为考察地聚物砂浆在有耐高温要求的混凝土结构加固领域的应用可行性,开展了常温下和高温后地聚物砂浆的抗拉强度试验以及地聚物砂浆与普通水泥砂浆及普通混凝土基体的粘结性能试验,并与普通水泥砂浆的抗拉及粘结性能进行试验比较;通过热重分析-差示扫描量热分析(TG-DSC),探究了地聚物砂浆的高温强度退化机理.试验结果表明:地聚物砂浆与水泥砂浆及混凝土之间的常温粘结强度分别达2.15 MPa及1.7 MPa,经300℃高温后残余粘结强度仍有1.5 MPa左右,远高于普通水泥砂浆的粘结强度;超过300℃以后地聚物砂浆的强度急剧退化,这主要是因地聚物砂浆高温脱水、微观结构遭受破坏引起.基于上述试验结果,可将地聚物砂浆用于300℃以下高温环境的混凝土结构修补加固.     

表面包覆改善球形Ni（OH）2高温性能的研究

采用Yb／Co氢氧化物共沉淀包覆方法和Ca3（PO4）2与Co（OH）2分别沉淀分层包覆方法在球形Ni（OH）2的表面进行了均匀的包覆。前者利用COSO4，YbCl3和NaOH溶液进行共沉淀包覆，后者是先在球形Ni（OH）2的表面沉淀包覆Ca3（PO4）2，然后再沉淀包覆Co（OH）2。结果显示，两种包覆方法均能有效地提高球形Ni（OH）2的高温（60℃）性能。按照Yb／Co=0．75％：2％共沉淀包覆的试样制成AA型电池后，在60℃下1C放电的容量保持率达到常温下的90％。而2％Ca3（P04）2与2％Co（OH）2分层包覆后的球形Ni（OH）2制成AA型电池后，在60℃下1C放电的容量保持率达到常温下的81％。未包覆和仅用Co（OH）2包覆的球形Ni（OH）2制成的AA型电池，在60℃下1C放电的容量保持率分别只有46％和48％。通过循环伏安测试表明，利用表面包覆的方法可以增大正极材料Ni（OH）2在高温下的氧化电位、析氧电位和两者之间的电位差，从而提高了材料在高温下的电化学性能。     

高层建筑高位水箱设计研讨

高层建筑高位水箱是高层建筑生活给水和消防给水设计中的重要环节。对高位水箱设置的必要性,高位水箱的容积、高位水箱坑度进行了研究和探讨 。