关于深冲薄钢板中的夹杂和成形性的商榷

对深冲薄钢板大生产的全工艺过程进行了跟踪，研究了ＷＹ０８ＡｌＡ薄钢板中Ａｌ＿２Ｏ＿３的形成，形态以及它们对冷轧成品的深冲性能和冲压小件的冲压成形废品率的影响。     

《燃气红外线辐射供暖系统设计选用及施工安装》国家标准图集介绍

介绍了该国家标准图集的主要内容：设计说明、典型设计、工程实例、系统设备、燃气管道安装、液化石油气气化站、电气控制及温度检测、施工安装说明。     

Structure and processability of iodinated poly(vinyl alcohol). IV. Drawability of the films iodinated at solution before casting

The drawability of iodinated at solution before casting (IBC) polyvinyl alcohol films prepared by casting aqueous solutions of 10 wt % PVA containing 15.2, 39.8, 83.2, 117.0, and 140.1% was examined with a tensile tester at 20–60°C. The tensile behavior of IBC films showed that the yield and breaking loads were much lower, and the breaking elongation was even higher than those of the unoriented iodinated after casting (IAC) films as well as the untreated PVA films. The maximum draw ratios of the films with the weight gain of 15.2, 39.8, 83.2, 117, and 140.1% were 4.5, 5.5, 8.5, 8.0, and 7.5, respectively, which were achieved at 20°C in all. The crystallinity of all films increased by the maximum draw, regardless of crystallinity before drawing. The crystalline structure was recovered to the original PVA crystalline lattice by deiodination. Amorphous orientation and initial moduli increased with the maximum draw ratio, while the orientation of crystals was constant. The orientation and moduli increased up to the weight gain of 83.2%, whose highest draw ratio and initial modulus were 8.5 and of 7.1 GPa, respectively, and then decreased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

一步法生产涤纶FDY工艺的探讨

利用ＫＶ７３１纺丝设备一步法生产出涤纶ＦＤＹ，探讨了热辊拉伸和熔体温度对纤维质量的影响。采用高特性粘数的聚酯切片，严格控制纺丝工艺，可以在５０００ｍ／ｍｉｎ的纺丝速度下纺制高质量的细旦涤纶ＦＤＹ。     

Increasing productivity and protein content using early-maturing rices and efficient nitrogen management

Germplasm with shorter duration than that of the currently grown varieties is being generated to maximize productivity of irrigated rice. However, short-duration varieties often produce yields lower than the medium- and long-duration varieties. Experiments were conducted during the 1980–82 dry and wet seasons to increase productivity through the use of very early-maturing rices and the improved management of nitrogen (N) fertilizers.Results over three years showed that IR58 and IR9729-67-3 (growth duration 100 ± 5 days) yield as well as or higher than IR36 although earlier maturing. They generally had a higher productivity (kg ha^–1 day^–1) than IR36 (110 ± 5 days).Three years' data suggest that the improved timing of broadcast applications of urea in split doses increased grain yield comparable with the basal incorporation of slow-release sulfur-coated urea (SCU) or deep point-placement of urea supergranules (USG).Results on elite breeding lines showed that the early-maturing IR9729-67-3 produced higher protein yield ha^–1 than longer duration varieties such as IR8 and IR42 in the dry season. Furthermore, contrary to earlier results, single basal incorporation of slow-release SCU increased the protein yield of rice by 53 kg ha^–1 and deep point-placement of USG by 43 kg ha^–1 over split application of prilled urea.     

Crystal lattice deformation and the mesophase in poly(ethylene terephthalate) uniaxially drawn by solid-state coextrusion

The development of crystalline and mesophase structure on drawing of poly(ethylene terephthalate) (PET) has been studied. The uniaxial drawing has been done by solid-state coextrusion from 50 to 90°C. The unit-cell parameters of stress-induced crystallites in extrudates have been determined as a function of extrusion draw ratio (EDR) up to 4.4 and at an extrusion temperature (ET) above T_g, at 70 and 90°C. The higher the EDR, the longer the c-axis chain direction, the shorter the a and b axes and the smaller the unit-cell volume. In comparison with the conventional lattice parameters obtained by Bunn and Fisher, the highest elongation of the c axis is near 10%. These features imply that the lattice of stress-induced crystallites is far from the closest packing. Coextrudates made below the T_g of PET differ markedly from those made above T_g. Wide-angle X-ray diffraction (WAXD) patterns of PET extruded at 50°C (below T_g) even at high draw ratio exhibit small and/or imperfect crystallites. They appear much as a mesophase. The distance between macromolecular chains ranges from 3.2 to 5.4 Å. The shortest value in the mesophase approaches the interplanar crystal distance of 3.4 Å for the (100) crystal face, on which the benzene rings lie. The crystalline peak separation of the PET, WAXD curve has been evaluated to obtain absolute crystallinities and the content of mesophase and amorphous phase.     

深基坑工程安全评价的尖点突变模型

为评价深基坑工程失稳的突变特征,采用突变理论建立了深基坑工程尖点突变安全评价模型.根据工程安全监控理论,引入突变理论,以基坑水平变形为例,考虑深基坑土体的流变特性,建立了基于时效影响因子的深基坑工程尖点突变安全评价模型.实例分析表明,尖点突变安全评价模型克服了采用常规设置监控值评价时参数选择困难,并能反映基坑失稳突变性的特点,可以量化评价基坑安全程度,正确评价安全状态,具有适应性强、精度高的优点.     

Zonal disintegration phenomenon in enclosing rock mass surrounding deep tunnels -- Elasto-plastic analysis of stress field of enclosing rock mass

The zonal disintegration phenomenon (ZDP) is a typical phenomenon in deep block rock masses. In order to investigate the mechanism of ZDP, an improved non-linear Hock-Brown strength criterion and a bi-linear constitutive model of rock mass were used to analyze the elasto-plastic stress field of the enclosing rock mass around a deep round tunnel. The radius of the plastic region and stress of the enclosing rock mass were obtained by introducing dimensionless parameters of radial distance. The results show that tunneling in deep rock mass causes a maximum stress zone to appear in the vicinity of the boundary of the elastic and the plas-tic zone in the surrounding rock mass. Under the compression of a large tangential force and a small radial force, the rock mass in the maximum stress zone was in an approximate uniaxial loading state, which could lead to a split failure in the rock mass.     

朴素贝叶斯与全贝叶斯在DFI的应用比较研究

P2P应用软件检测技术主要是深度包检测法和深度流量检测法.深度包检测法不能检测出加密的和未知的对等网络流应用,深度流量检测方法可以克服深度包检测法这个缺点.将模糊识别领域里比较成熟的贝叶斯分类技术应用到对等网络深度流检测中.结合实际项目,对贝叶斯的两个分类器-朴素贝叶斯和全贝叶斯的算法、训练结果、运行结果进行研究,实验研究表明朴素贝叶斯和全贝叶斯分类器能够快速准确地找到P2P流应用,朴素贝叶斯分类器准确度占据优势,全贝叶斯运行时间占据优势.