Low cycle fatigue behavior of a eutectic 80Au/20Sn solder alloy

The eutectic 80Au/20Sn solder alloy is widely used in high power electronics and optoelectronics packaging. In this study, low cycle fatigue behavior of a eutectic 80Au/20Sn solder alloy is reported. The 80Au/20Sn solder shows a quasi-static fracture characteristic at high strain rates, and then gradually transforms from a transgranular fracture (dominated by fatigue damage) to intergranular fracture (dominated by creep damage) at low strain rates with increasing temperature. Coffin-Manson and Morrow models are proposed to evaluate the low cycle fatigue behavior of the 80Au/20Sn solder. Besides, the 80Au/20Sn solder has enhanced fatigue resistance compared to the 63Sn/37Pb solder.     

Effect of microstructure on the fatigue crack growth behaviour of a near-α Ti alloy

Fatigue crack growth behaviour of Ti–6Al–2Zr–1.5Mo–1.5V (VT-20 a near-α Ti alloy) was studied in lamellar, bimodal and acicular microstructural conditions. Fatigue crack growth tests at both increasing and decreasing stress intensity factor range values were performed at ambient temperature and a loading ratio of 0.3 using compact tension samples. Lamellar and acicular microstructures showed lower fatigue crack growth rates as compared to the bimodal microstructure due to the tortuous nature of cracks in the former and the cleavage of primary α in the latter. The threshold stress intensity factor range was highest for acicular microstructure.     

LWIP协议在STLite/OS20操作系统中的移植

介绍了免费的TCP/IP协议栈LWIP开发工具和环境,分析了如何实现LWIP的移植,并给出了一种嵌入式系统与网络互联的新思路。     

20世纪的泥沙运动力学

在20世纪，泥沙运动力学的研究取得了不少突出的成绩，但与其他学科同时期的进展相比，发展还是比较缓慢的。按取得的进展来看，20世纪可分为两个阶段；在上半叶，有6项突破性进展，逐步积累，到1950年，Einstein集大成，提出了第1 个泥沙运动力学理论体系。在下半叶，进入了百家争鸣的时代，一些研究者提出了自己的泥沙运动理论体系，作者列举了8个有代表性的理论体系。受计算机时代的影响，从20世纪70年 代开始出现了根据大量实测资料，利用计算机进行回归分析而得出的阻力和输沙率公式，而不拘泥于发展新的理论。与此同时，一些与实际偏离较远的理论逐渐被淘汰。在21世纪，要搜集系统完整的资料，特别是近底层的资料，并拓宽研究领域到环境，生态等学科。     

微型生化分析仪样品室温度控制系统研究

结合微型生化分析仪样品室的要求,设计了一种基于单片机的微型生化分析仪样品室温度控制系统.它以AT89S51为核心,采用单总线高精度数字温度传感器DS18B20对样品室温度采样,同时利用汇编语言编写温度设定与控制程序,采用半导体制冷的方式,实现了温度在25℃、30℃、32℃和37℃四个温度值的稳定,控制精度达±0.5℃.     

A Hermitian Box-scheme for One-dimensional Elliptic Equations – Application to Problems with High Contrasts in the Ellipticity

We introduce a new box-scheme, called ``hermitian box-scheme' on the model of the one-dimensional Poisson problem. The scheme combines features of the box-scheme of Keller, [20], [13], with the hermitian approximation of the gradient on a compact stencil, which is characteristic of compact schemes, [9], [21]. The resulting scheme is proved to be 4th order accurate for the primitive unknown u and its gradient p. The proved convergence rate is 1.5 for (u,p) in the discrete L ² norm. The connection with a non standard mixed finite element method is given. Finally, numerical results are displayed on pertinent 1-D elliptic problems with high contrasts in the ellipticity, showing in practice convergence rates ranging from 1 to 2.5 in the discrete H ¹ norm. This work has been performed with the support of the GDR MOMAS, (ANDRA, CEA, EDF, BRGM and CNRS): Modélisation pour le stockage des déchets radioactifs. The author thanks especially A. Bourgeat for his encouragements and his interest in this work.     

转炉冶炼20CrMo钢的生产实践

介绍了石家庄钢铁有限公司转炉生产20CrMo钢的工艺技术及其产品质量状况和这一新工艺所带来的显著效益。     

转炉冶炼20管坯钢生产实践

介绍了20#管坯钢的生产试验工艺，采取了拉碳法脱碳、钢包底吹氩及喂丝、保护浇铸、合理控制拉速等有效措施，解决了生产中存在的质量问题，为下一步的生产提供了理论和实践依据。     

20CrMo棒材带状组织的控制研究

通过Gleeble-1500热模拟机对20CrMo轧材精轧阶段轧制过程及冷却过程的模拟,研究了终轧温度、冷却速度对室温组织的影响,分析了形成带状组织的条件,最终得出了理想室温组织的终轧温度和冷却速度。     

20K以下温区单级脉管制冷机直流控制实验研究

开展了20K以下温区单级脉管制冷机的实验研究，考察了直流流动对制冷机性能的影响，估算了不同制冷温度下制冷机循环的需气量，在对直流进行控制的情况下，采用2kW(RW2)和4kW(CP4)压缩机分别获得了18．7K和14．7K的最低制冷温度，对应的在30K的制冷量分别为10W和29．5W。