武山铜矿主井系统延深改造及效果浅析

武山铜矿主井延深时根据新的采、选工艺要求，在前期工程的基础上，对其箕斗提升系统进行改造，增设坑内破碎。针对该矿特粘的矿石性质和前期工程遗留问题，在具体设计和实施过程中采取特别措施保证系统通畅和安全并注意节省投资。同时对尚存在的问题也提出了新的思考。     

无线收、发信机的设计

主要讲述移动通信中收、发信机的工作原理、基本结构和组成.在给出收、发信机原理框图的同时,着重分析了锁相环路的设计.     

Experimental Research on Erbium-doped Superfluorescent Fiber Source

The effects of the variations in fiber length, fiber mirror reflectance on efficiency and output power are experimentally investigated for erbium-doped double pass backward superfluorescent fiber sources (SFSs). The influence of fiber length on mean wavelength stability (MWS) has also been demonstrated. By incorporating a short section of un-pumped erbium-doped fiber (EDF) at the output port, the pump power dependent on MWS becomes independent of pumped EDF length. This is a novel phenomenon that hasn‘t been reported up to now,and should be helpful to SFS fabrication and theory analysis. By using a fiber Michelson interferometer as spectrum slicing component,a multi-wavelength fiber source (MWFS) with ～20 channels (from 1542nm to 1559nm) is got. The MWFS has a channel spacing of ～0. 8 nm which satisfies ITUstandard. The intensity fluctuation among channels is less than 0.5dB,and the extinction ratio of all channels is above 14dB. This kind of MWFS should be useful to wavelength division multiplexing systems.     

罗茨真空泵的溢流阀与旁通阀的组合

在简要地介绍了罗茨泵功能的基础上，通过溢流阀的改进设计，使溢流阀成为既能旁通又能溢流的组合阀，罗茨泵的功能将更加完备。     

Modified CIELAB formula tested using a textile pass/fail data set

The proposed new color-difference formula of CIE TC 129, which is a modified version of CIELAB, was tested with a recently published data set of textile pass/fail judgments. Goodness of fit is improved, if the parameter of lightness is set near 2, and if, additionally, a weight function for lightness is defined that reduces the weight of a lightness difference with lightness level in relation to chroma or hue scaling. © 1994 John Wiley & Sons, Inc.     

等腰梯形焊管孔型设计

在对等腰梯形焊管形状分析的基础上。精确计算了其周长，并在数学推导基础上，计算了各架次孔型尺寸，完成了等腰梯形焊管轧辊设计，使用结果表明；设计方法合理，孔型尺寸计算准确。使用效果良好。     

Measurement accuracy enhancements for wideband modulated signals

Time‐domain waveform measurements of wideband modulated signals, although attractive for communication systems modeling applications, have until now lacked the required accuracy for quantitative analysis. New developments described here enhance the accuracy of these measurements, enabling their application to communication system characterization and modeling. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 13: 32–39, 2003.     

连续式棒线材轧机孔型系统的选择

论述了连续式棒线材轧机孔型系统的种类和特点，介绍了粗轧机组和中轧机组孔型系统的选择原则和方法。     

双焊缝方矩形钢管生产工艺介绍

介绍了双焊缝方矩形钢管生产技术的特点及冷弯等边槽钢孔型设计参数.通过双焊缝方矩形钢管用冷弯等边槽钢的孔型设计、生产,实现了大截面双焊缝方、矩形钢管的生产,满足了客户的需求.     

钒微合金Φ25mm热轧左旋带肋钢筋的研制与生产

通过对热轧左旋带肋钢筋（HRBL600）的质量特性分析,制定了热轧左旋带肋钢筋的化学成分,孔型设计方案和生产工艺。生产实践证明：该产品开发获得成功,产品质量达到标准要求。