聚乳酸的改性以及活性聚合方法

对聚乳酸这种具有生物降解性和生物相容性的高分子材料的化学改性和活性聚合近年来的研究工作进行了综述，化学改性主要涉及丙交酯和水溶性聚合物的共聚，而许多物质可以引发丙交酯的活性聚合，特别是带官能团的烷氧基类化合物更具有实际的应用价值。     

氮肥工业与21世纪的生物能源

介绍近年来美国生物能源的开发进展情况及其先进的支撑系统，提出如何使我国氮肥工业在发展我国生物能源中起促进作用。     

Importance of Low-Temperature Melt-Mixing on the Construction of Stereocomplex Crystallites with Superior Nucleation Efficiency in Asymmetric Poly(l-lactide)/Poly(d-lactide) Blends

The nucleation efficiency (NE) of stereocomplex crystallites (SCs) formed in asymmetric poly(L-lactide)/poly(D-lactide) (PLLA/PDLA) blends is generally unsatisfactory because the competition between stereocomplexation and chain mixing involved in the melt-mixing process can cause low formation efficiency and even severe aggregation of SCs. Herein, it is attempted to achieve high-efficient formation of finely dispersed SCs particles by designing a unique melt-mixing procedure, where the mixing of PLLA with 0.75 wt% PDLA is first performed at elevated temperatures (far above the melting temperature of SCs) to allow the homogeneous mixing of PLLA/PDLA chains and then at a low temperature (slightly above that of homocrystallites) to permit the full stereocomplexation of the premixed chains. It is found that the SCs formed in the blends exhibit unexpectedly low NEs (e.g., 54.5%), much inferior to that (73.6%) in the counterpart without undergoing premixing. This is because the introduction of premixing leads to a remarkable deterioration in the amount of SCs particles formed, despite decreased particle size, highlighting that the direct mixing at low temperatures of 170–180 °C (about 20–30 °C lower than that used in common melt-processing of PLA) is more effective for the construction of SCs with superior NE. The mechanisms for these striking findings are discussed.     

Polylactide films formed by immersion precipitation: Effects of additives,nonsolvent, and temperature

The influence of nonsolvent, crystallinity of the polymer film, and addition of dodecane (a poor solvent for the polymer and for the nonsolvent) on the morphology of polylactides films has been investigated and was related to phase separation behavior. Both amorphous poly‐DL ‐lactide (PDLLA) and crystalline poly‐L ‐lactide (PLLA) were dissolved in dichloromethane, and subsequently films were made by immersion in nonsolvent baths. PDLLA gave dense films without any internal structure, since the structure was not solidified by crystallization or glassification. PLLA films show varying structure depending on the nonsolvent. With methanol, asymmetric morphologies were observed as a result from combined liquid‐liquid demixing and crystallization, while with water symmetric spherulitic structures were formed. As a next step, dodecane was added, which is not miscible with the nonsolvent, and we found it to have a strong influence on the morphology of the films. The PDLLA films with dodecane did not collapse: a closed cell structure was obtained. In PLLA films, dodecane speeds up phase separation and induces faster crystallization in the films, and the porosity, size of the pores, and interconnectivity increased. When the PLLA solutions were subjected to a heat pretreatment, crystallization could be postponed, which yielded a cellular structure around dodecane, which did not contain spherulites anymore. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 959–971, 2007     

可生物降解热熔胶粘剂的研究进展

综述了近年来可生物降解热熔胶的发展、合成、性能、应用、最新的研究进展。     

原子转移自由基聚合法制备聚乳酸三嵌段共聚物的研究

以自制的双端羟基聚乳酸与α-溴代丙酰溴反应而制得的含溴端基的聚乳酸为大分子引发剂,溴化亚铜/2,2′-联吡啶为催化体系,研究了N-乙烯基吡咯烷酮的原子转移自由基聚合行为,制得了具有两亲性聚乳酸嵌段共聚物。随单体/引发剂摩尔比的增大、聚合温度的升高,共聚物溶液的特性黏度增大,共聚物薄膜的吸水率增加;共聚物在不同降解介质中的降解规律相似,均随降解时间的延长,共聚物薄膜的失重增加,且在不同介质中呈现的降解速率表现为碱液>酸液>水>缓冲液。对聚合物进行了结构表征。     

聚乳酸/二氧化硅有机无机杂化材料的制备和表征

以聚乳酸(PLA)、正硅酸乙酯(TEO S)为原料,活性单体3-氨基丙基三乙氧基硅烷(APTES)为偶联剂,采用两步法制备PLA/S iO2杂化材料。采用FT-IR、DSC和TEM等技术对杂化材料进行表征。研究结果表明,杂化材料中有机组分和无机组分通过APTES发生了化学键合;材料的玻璃化转变温度(Tg)随着二氧化硅含量的增大而提高;随APTES加入量增大、酰胺化反应温度升高,反应时间延长,杂化材料的溶胶分数减小。     

Preparation of monomer of degradable biomaterial poly（L-lactide）

1INTRODUCTION Polylactide,oneoftheimportantbiodegrada blematerials,whichhasfavorablebiocompatibility andabsorption[1],hasbeenusedinimplant,chor dasericachirurgicalis,drugcontrolledrelease,boneinternalfixation,tissueengineeringetc[25]. Thepoly(L lactide)(PLLA)withhighrelative molecularmasswasobtainedbyring openingpoly merizationatpresent.Thatis,firsttheintermedi ateproduct(lactide)wasobtainedfromlacticacid, thenthepoly(L lactide)wasobtainedfrominter mediateproductbyring openingpolymer…     

A Study on the FTIR Spectroscopy of Polylactide Doped with Nano-Aluminium Oxide and Nano-Cupric Oxide

Elucidation of the structure of naturally existing or synthesized substances is an important criterion in the study of materials to predict the application of the substance. In this study, polylactide was doped with nano-aluminium oxide and nano-cupric oxide with 1 and 3 mg of concentration variants. The interaction between the polymer matrix and the nanoparticles has been studied using Fourier transform infrared. Successful doping of the polymer has been observed. Attention has been drawn to check the intermolecular bonding in films having varying thicknesses, films prepared at higher sonication temperatures, and chemical homogeneity of the doped polymer films.     

Synthesis of polylactide‐based thermoset resin and its curing kinetics

A new class of biobased thermoset resins, methacrylated four‐armed star‐shaped polylactides (M4sPLAs), was prepared. The effect of star architecture, e.g. varying arm length, on the properties of the cured products was examined. Based on differential scanning calorimetry, the non‐isothermal and isothermal curing behaviors of these M4sPLAs were investigated. Various curing kinetic parameters were obtained and elucidated using autocatalytic reaction models. Experimental results indicate that the oligomers can be crosslinked into a rigid network within a curing time varying from several minutes to more than an hour upon thermal initiation. The curing processes of M4sPLAs with varying arm length are different and complex, as indicated by the change of various kinetic parameters, reaction orders and evolutions of activation energy under the test reaction conditions. High crosslinking density is especially effective for improving the thermal stability of polylactide, but also leads to slower degradation rate and deterioration of its impact properties. Copyright © 2012 Society of Chemical Industry