含氨烷基聚硅氧烷的研究进展

对含氨烷基聚硅氧烷的研究进行综述，着重介绍含氨烷基聚硅氧烷的种类，性能特点，制备方法及应用等。     

Synthesis and structural characterization of methacrylic acid/octadecyl acrylate‐graft‐poly(methylhydrosiloxane) by hydrosilylation

Methylmethacrylate (MMA) and octadecyl acrylate (OA) were grafted to poly(methylhydrosiloxane) (PMHS) by hydrosilylation, respectively, with hexachloroplatinic acid as catalyst, and the former was further hydrolyzed to prepare methacrylic acid (MAA)‐graft‐PMHS under the alkaline condition. Through orthogonal experiment, main factors affecting the graft reaction between OA and PMHS were discussed and arranged in a decreasing order according to their abilities of the effect on the hydrosilylation of OA with PMHS: catalyst dosage, reaction temperature, reaction time, material ratio, and solvent dosage. It was found that the hydrosilylation of OA with PMHS was easier to that of MMA with PMHS. Under optimal conditions, the grafting ratios of MMA with PMHS and OA with PMHS reached about 90 and 95%, respectively. FTIR and ¹H NMR spectra indicated that the hydrosilylation reactions followed the Markovnikov's rule and played a strong preference toward β‐1,2‐addition. The test of contact angle indicated that surface energy of a system was mainly dependent on the polar groups. The surface energy of OA‐graft‐PMHS (35.07 mN/m) was similar to those of PMHS (35.62 mN/m) and polyoctadecyl acrylate (36.57 mN/m), and lower than that of MAA‐graft‐PMHS (43.50 mN/m). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Hydrosilylation and dehydrocondensation reactions of methylhydridesiloxane to acrylic and methacrylic acids

The hydrosilylation of α,ω‐bis(trimethylsiloxy) methylhydridesiloxane (degree of polymerization ≈ 53) with acrylic and methacrylic acid with various ratios of the initial compounds, in the presence of platinum hydrochloric acid, has been investigated. In the presence of platinum hydrochloric acid, competitive dehydrocondensation reactions take place with the formation of various oligomers with various chemical links. In the later stages of the reaction, three‐dimensional systems have been obtained. During dehydrocondensation, the reaction order, reaction rate constants, and activation energy have been determined. The structures of the synthesized oligomers have been determined with IR and NMR spectroscopy data. Gel permeation chromatography, differential scanning calorimetry, and X‐ray analyses of the synthesized oligomers have been carried out. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3243–3252, 2007     

Preparation and properties of water‐soluble polyester surfactants. II. Preparation and surface activity of silicone‐modified polyester surfactants

We prepared a novel series of water‐soluble silicone‐modified polyesters [poly(ethylene glycol) (PEG)–silicone polyesters] by reacting organopolysiloxane with a hydroxy‐terminated polyester. The polyesters were obtained by the polymerization of maleic anhydride and PEGs (molecular weights = 2000, 4000, 6000, 8000, and 10000). These water‐soluble PEG–silicone polyesters can be used as auxiliaries in dyeing process because they exhibit good surface activities such as surface tension, low foaming, and wetting power. The presence of these surfactants also retarded the rate of nylon dyeing with acid dyes. The retarding effect and low‐foaming property of these novel PEG–silicone polyesters make it possible for these surfactants to be used as leveling agents for modern nylon dyeing with acid dyes. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3005–3012, 2002     

New approach for the preparation of nanoporous polyorganosilicate low‐k films

The distribution of pores and the mechanical properties of materials are the key factors in preparing satisfactory low‐k films. In the present study, a kind of silsesquioxane‐polyethylene glycol (SSQ‐PEG) was synthesized and used as a template to make the distribution of pores more even in the low‐k films. The crosslinking density of films could be adjusted by the sol‐gel of tetramethoxysilane/dimethoxydimethylsilane with various proportions. The porosity of films could also be adjusted with different proportions of pendant PEG chains introduced. A dielectric constant as low as 2.1 had been achieved for nanoporous polyorganosilicate films with good tenacity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1238–1243, 2007     

Characterization of poly(vinyl pyrrolidone‐co‐isobutylstyryl polyhedral oligomeric silsesquioxane) nanocomposites

Poly(vinyl pyrrolidone‐co‐isobutyl styryl polyhedral oligomeric silsesquioxane)s (PVP–POSS) were synthesized by one‐step polymerization and characterized using FTIR, high‐resolution ¹H‐NMR, solid‐state ¹³C‐NMR, ²⁹Si‐NMR, GPC, and DSC. The POSS content can be controlled by varying the POSS feed ratio. The T_g of the PVP–POSS hybrid is influenced by three main factors: (1) a diluent role of the POSS in reducing the self‐association of the PVP; (2) a strong interaction between the POSS siloxane and the PVP carbonyl, and (3) physical aggregation of nanosized POSS. At a relatively low POSS content, the role as diluent dominates, resulting in a decrease in T_g. At a relatively high POSS content, the last two factors dominate and result in T_g increase of the PVP–POSS hybrid. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2208–2215, 2004     

聚硅氧烷改性环氧树脂的研究进展

综述了制备聚有机硅氧烷改性环氧树脂的4种途径：含羟基或烷氧基的聚硅氧烷与环氧树脂的反应、含氨基的聚硅氧烷与环氧树脂的反应、含硅氢基的聚硅氧烷与环氧树脂的反应、含杂原子的聚硅氧烷与环氧树脂的反应,并讨论了聚有机硅氧烷改性环氧树脂对环氧树脂的相结构、机械性能和热稳定性的影响.     

Biocidal hydantoinylsiloxane polymers. IV. N‐halamine siloxane‐functionalized silica gel

The monomer 5,5‐dimethyl‐3‐(3′‐triethoxysilylpropyl)hydantoin and its hydrolysis product polymer poly[3‐(5,5‐dimethylhydantoinylpropyl)hydroxysiloxane] were employed to functionalize the surfaces of silica gel particles in order to produce an adhered film that becomes biocidal upon chlorination with dilute sodium hypochlorite bleach. The biocidal efficacy of the functionalized silica gel was demonstrated in a cartridge filter experiment against the bacterial pathogens Staphylococcus aureus and Escherichia coli O157:H7. Complete 6 log inactivations of the two bacterial species were observed within 30 s of contact. Moreover, upon loss of biocidal activity due to depletion of bound chlorine, the coated silica gel particles could be recharged by further exposure to dilute bleach. Potential uses of the biocidal silica gel include disinfection and odor control in water treatment facilities and recirculating baths. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3448–3454, 2006     

A comparison of the ethoxylation of a fatty alcohol,fatty acid,and dimethiconol

Knowing that dimethiconols or silanols condense under acid or alkaline catalysis, a study was undertaken to determine if these compounds could be successfully ethoxylated under conditions similar to those used to ethoxylate fatty alcohols and acids. It was anticipated that the condensation reaction would take precedent over ethoxylation reaction. We determined that ethoxylation reaction occurs preferentially to condensation reaction. In addition, kinetics of ethoxylation are similar to kinetics observed when fatty alcohols are ethoxylated. This reaction gives rise to a new class of hydrolyzable silicone compounds that have applications in industrial as well as in personal-care products.     

Preparation,morphology, and mechanical properties of elastomers based on α,ω‐dihydroxy‐polydimethylsiloxane/polystyrene blends

α,ω‐Dihydroxy‐polydimethylsiloxane/polystyrene (PDMS/PS) blends were prepared by the solution polymerization of styrene (St) in the presence of α,ω ‐dihydroxy‐polydimethylsiloxane (PDMS), using toluene as solvent and benzoyl peroxide (BPO) as initiator. The PDMS/PS blends obtained by this method are a series of stable, white gums, which were vulcanized to elastomers at room temperature with methyl‐triethoxysilicane (MTES). The use level of MTES was far more than the necessary amount used to end‐link hydroxy‐terminated chains of PDMS, with the excess being hydrolyzed to crosslinked networks, which were similar to SiO₂ and acted as filler. Investigations were carried out on the elastomeric materials by extraction measurement, swelling measurement, and scanning electron microscopy. The extraction data show that at each composition the amount of soluble fraction is less than expected and the difference between experimental and theoretical values becomes more and more significant as PS content increases. This is mainly due to the grafting of PS onto PDMS and the entanglement of PS in the interpenetrating polymer network (IPN), which consists of either directly linked PDMS chains or chains linked via PS grafts and is formed by free radical crosslinking of PDMS during the radical polymerization of St. PS grafted on PDMS is insoluble and PS entangled in the IPN is difficult to extract. Both render the soluble fraction to be less than expected. As the St content in preparing PDMS/PS blends increases, the probability of grafting PS onto PDMS also increases, which may subsequently produce a higher crosslinking level of PDMS networks that linked via PS grafts by radical crosslinking. As a result, not only the amount of insoluble PS increases but also PS entangled in the IPN is more difficult to extract. Scanning electron microscopy demonstrates that the elastomer system has a microphase‐separated structure and a certain amount of PS remains in the PDMS networks after extraction, which is in accordance with the extraction data. Moreover, the mechanical properties of the elastormeric materials have been studied in detail. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3542–3548, 2004