液体火箭发动机研制情况的一些回顾

４０年来，我国液体火箭发动机的研制工作取得了很大成绩。文中对发动机的一些研制情况作了回顾，对ＹＦ－７３和ＹＦ－７５氢氧发动机的设计特点、飞行结果作了简单叙述。对今后工作也提出了看法。     

AP的安全制备（英）

1 IntroductionThe ammonium perchlorate ( AP)-based compositepropellant is currently the most widely used one becausethis propellant has good burning characteristics and me-chanical properties. One of the few serious drawbacks ofthe AP-based propellant is that its products of combus-tion, which include HCl, chlorine, and chlorine oxides,cause atmospheric pollution. Increasing concern for aclean atmosphere in recent years has resulted in a com-pelling need for developing a chlorine-free,enviro…     

含过期火药粉状工业炸药的研究

文章概要论述了一种新型民用炸药－含过期火药粉状工业炸药在配方、制造工艺等方面所进行的实验研究。结果表明，该炸药性能良好、制造技术安全可靠，值得推广。     

片状变燃速发射药燃烧性能的数值计算

为研究包覆方式对片状发射药燃烧性能的影响,建立了不同包覆方式下多层片状发射药的物理模型,并推导了形状函数和燃气生成猛度表达式,利用Matlab软件对不同的宽厚比、长厚比及多层结构的片状发射药进行了数值计算;制备了不同长厚比的片状变燃速发射药,并进行了密闭爆发器实验。结果表明,四面包覆和全包覆可以很好地消除临界宽厚比对片状发射药燃烧性能的影响;与两面包覆的片状发射药相比,四面包覆和全包覆的片状发射药能够延缓内层药减面燃烧的时间,其燃气生成猛度的阶跃程度分别提高了1.17%和1.23%,呈现出良好的燃烧渐增性。     

双基推进剂硝胺脱湿及其键合剂分子设计

针对双嘶推进剂的能量的民力学性能降低的矛盾，阐述了ＲＤＸ、ＨＭＸ等环硝胺的脱湿现象。键合剂的选择与设计的难度，键合剂的分子主主其相关技术，键合剂的合成探索等问题。     

Mechanism and laws of combustion of composite solid propellants with a coolant

The model of combustion of a composition consisting of a quasi-homogeneous composite propellant (matrix) and coolant particles is considered. The model is based on the leading role of exothermal decomposition of the matrix and on the cooling effect of the second component by virtue of transverse heat transfer between the components in the condensed and gas phases. Formulas for combustion characteristics (temperature, burning rate, its sensitivity to pressure, and initial temperature) are derived and analyzed. The calculated dependences of these characteristics on pressure, particle size, concentration, and thermal effects of decomposition of the components show that transitional regimes with a stronger dependence of the burning rate on pressure than that of the initial propellant are reached in a certain range of parameters. An algorithm is proposed, and a parametric identification of the model on the basis of experimental data is performed. __________ Translated from Fizika Goreniya i Vzryva, Vol. 43, No. 6, pp. 51–60, November–December, 2007.     

Condensed combustion products of aluminized propellants. IV. Effect of the nature of nitramines on aluminum agglomeration and combustion efficiency

The condensed combustion products of two model propellants consisting of ammonium perchlorate, aluminum, nitramine, and an energetic binder were studied by a sampling method. One of the propellants contained HMX with a particle size D ₁₀ ≈ 490 μm, and the other RDX with a particle size _{D 10} ≈ 380 μm. The particle-size distribution and the content of metallic aluminum in particles of condensed combustion products with a particle size of 1.2 μm to the maximum particle size in the pressure range of 0.1–6.5 MPa were determined with variation in the particle quenching distance from the burning surface to 100 mm. For agglomerates, dependences of the incompleteness of aluminum combustion on the residence time in the propellant flame were obtained. The RDX-based propellant is characterized by more severe agglomeration than the HMX-based propellant — the agglomerate size and mass are larger and the aluminum burnout proceeds more slowly. The ratio of the mass of the oxide accumulated on the agglomerates to the total mass of the oxide formed is determined. The agglomerate size is shown to be the main physical factor that governs the accumulation of the oxide on the burning agglomerate. __________ Translated from Fizika Goreniya i Vzryva, Vol. 42, No. 4, pp. 78–92, July–August, 2006.     

定容条件下火药实际燃烧规律的数值模拟

为研究火药的实际燃烧规律,建立了定容条件下火药燃烧的修正数学模型,分析了火药实际弧厚的分布及变化、点火不同步和燃速系数变化等因素对火药实际燃烧规律的影响。在此基础上,用考虑综合因素的修正数学模型对定容条件下火药的实际燃烧过程进行了模拟,计算值与实验结果具有较好的一致性,说明修正模型所建立的假设及处理方案是合理的。     

固体推进剂燃烧机理诊断方法的研究进展

介绍和评述了诊断含能材料热分解和推进剂燃烧波结构的方法、仪器和研究进展,以及含能材料和推进剂热分解和燃烧波结构的研究结果,探讨了燃烧机理研究方法的发展方向。提出需要不断完善和更新推进剂燃烧的诊断方法,以获得更为全面的接近真实条件下推进剂燃烧的有效信息。附参考文献14篇。     

某弹射弹推进剂装药设计

通过对某弹射弹功能和使用要求分析，确定了该弹射弹的极限特征参数及弹道性能，提出了装药用推进剂的选取原则，经过弹道计算和分析，初步确定了所用推进剂及装药的药型，并进行了试验验证，为该弹射弹的研制打下了良好的基础。