基于主体外部轮廓的照片分割算法

在实际应用中常常需要将人像从照片的背景中有效地分割出来，通常的做法是通过提取照片中人像各部分特征来实现分割，其缺陷是计算复杂度较大，分割效果受各种干扰因素影响很大。现提出了一种基于主体外部轮廓信息的照片分割算法，通过梯度锐化、边缘保护、临近像素点相似度比较来确定图像的边界，该算法对于具有相对均匀背景的照片具有较高的计算效率。     

建筑电气设计中AutoCAD二次开发的研究

基于AutoCAD的二次开发环境下,建立幻灯片库,在AutoCAD本身所包含的程序帮助下,将已建好的幻灯片库嵌入到AutoCAD用户专用下拉菜单中.给设计者创造属于自己的开发环境,使AutoCAD在建筑电气设计中的使用更加灵活,极大的提高设计效率.     

形状记忆聚氨酯的结构与性能研究

以 2 ,4 -甲苯二异氰酸酯 (2 ,4 -TDI)、不同分子量的聚己二酸丁二醇酯 (PBAG)和 1,4-丁二醇 (BDO)为原料合成了具有形状记忆功能的聚氨酯材料。通过DSC、弯曲实验和力学实验 ,研究了形状记忆聚氨酯的性能 ,发现软段高度结晶和硬段聚集形成硬段微区是其具有较好形状记忆性能的必要条件。     

Stress State of Bent Buried Pipelines

The authors consider edge effects in buried pipelines that occur in the region of joining of a straight buried pipe and a bent insert (factory bend, elbow, or an elastically bent segment). The action of those effects results in the appearance of additional bending moments, which are proportional to the difference between the axial force in an infinite straight pipeline and that in a closed-end pipe, and depend on the geometrical parameters of the pipeline and physical-mechanical characteristics of the soil. Specific examples of analysis of elastic interaction of a pipeline with the soil for pipe bends with various radii of the bend arc are offered. It is shown that additional bending stresses may exceed appreciably the stresses from the axial force, and therefore, they should be taken into account when designing and building pipelines. The solution for an elastically bent segment has been obtained and analyzed.     

图片彩色参数数字滤波设计

颜色和形状信息是识别物体的重要信息．本文提出用数字滤波器将图象空间分割为H包含M和M/H空间的一种方法．该方法进一步将分析彩色图象为众所周知的测量分割部分几何特征的算法，包括通过节点的阶数确定分割部分的分布及动态特征，包括速度和移动方向的分布等．     

盾构管片衬砌吊装孔预埋件抗拔力试验初探

新版盾构法隧道施工及验收规范已于2017年7月实施,新规范中增加了对管片吊装孔预埋件“设计无要求时,抗拉拔力不应低于管片自重的7倍”的要求,对比之前常规5tf地铁管片设计采用的25tf,相当于提高了40%。文章依据管片预埋吊装孔抗拔力涉及的几种国家标准、行业规范,对几种抗拔试验进行了对比,参照ABAQUS有限元软件数值模拟法,论述了管片吊装孔预埋件抗拔力试验应注意的一些事项,为类似管片抗拔试验提供一些参考资料。     

Visual recognition efficiency of handheld infrared thermometer interface information under low ambient illuminance

One of the symptoms of plagues, epidemics or pandemics is often a fever, so during such unprecedented times, handheld infrared thermometers are vital devices for monitoring symptomatic individuals. It is therefore very important to enhance reading efficiency when these thermometers are used for lengthy periods of time in a low illuminance environment. The need for the efficient reading of infrared thermometers or a fast reaction time when reading the information is even more relevant now during the COVID-19 pandemic. In this study, a target search experiment of digital characters is carried out through a simulated interface and use scenarios of a handheld thermometer based on three variables: the inclination angle or slant of the seven segment display characters, screen brightness, and ambient illuminance. The experimental results show that the inclination angle or slant of the characters and ambient illuminance have a significant effect on the reaction speed. In general, the slowest reaction time is found when reading characters with a slant of 10° to the left and the reaction time is the fastest with a right slant of 20°. A continued reduction in ambient illuminance does not affect the visual recognition performance but instead further enhances reading efficiency. Increasing the screen brightness increases the reaction time more in relatively low ambient illuminance conditions as opposed to relatively high ambient illuminance, which implies that in higher ambient illuminance conditions, a brighter screen needs to be used to obtain the same reaction speed as that in lower ambient illuminance conditions.     

基于图像处理的片式元件缺陷检测算法

表面缺陷检测是电子元器件生产过程中的关键步骤,通过分析表面缺陷检测的现状问题,结合片式元件图像的自身特征,提出一种基于改进的自适应阈值canny算子的片式元件缺陷检测算法;该算法把片式元件灰度图像进行区域分割,得到不同值域范围内的灰度区域,利用带有敏感度的自适应双阈值canny算子进行边缘检测;算法实现结果表明,该算法能高效地检测并处理不同缺陷类型的片式元件,并且可以达到工业生产的检测速度。     

水性聚氨酯结构与微相分离的研究

合成了一系列水性聚氯酯，并用红外光谱、差示扫描量热仪对乳液胶膜进行表征，考察了软段组成、DMPA含量及。(-NCO)：n(-OH)比值对产物微相分离的影响。实验结果表明：聚醚型产物的微相分离程度高于聚酯型产物。提高DMPA用量，软段Tg移向低温区，说明体系的做相分离程度加大。随着n(-NCO)：n(-OH)比值的增大，软段Tg也移向低温区，软硬段的微相分离程度增大.     

Adhesion Mechanisms of Polyurethanes to Glass Surfaces I. Structure-Property Relationships in Polyurethanes and Their Effects on Adhesion to Glass

Polyurethanes were prepared from toluene diisocyanate (TDI), 1-4-butane diol (BDO) and polycaprolactone-based triols with varying molecular weights. Among each molecular weight triol-based urethane, hard segment content was varied from 20% to 70%. Differential scanning calorimetry, tensile testing, and Iosipescu shear testing were done on all the various urethanes prepared. Thermal characterization data revealed the dependence of phase separation on hard segment content as well as on the triol molecular weight. Tensile data and Iosipescu shear data further confirmed the observations made from the DSC data. The data further indicated that phase separation can greatly improve the modulus of cross-linked segmented urethanes. Adhesion of these urethanes to glass surface was evaluated using soda-lime float glass plate. Urethane samples were cast on the air side of the glass plates and adhesion was measured in shear mode. Adhesion data indicated that in addition to hard segment content, modulus, cross-link density, and molecular weight of the triols, phase separation seems to be a major factor in controlling adhesion. Surfaces of the failed adhesion samples were also analyzed and the failure mode was found to be cohesive, in varying degree, with the different urethane systems.