A facile method for preparation of PGS@ZB‐N and gas‐sol alternating synergistic effect for fire resistance of EVA

Through the simple precipitation of palygorskite (PGS) by zinc borate (ZB) (to make PGS@ZB) and the decoration of PGS@ZB by dodecylamine (N), a novel organic‐inorganic@inorganic hybrid flame retardant of PGS@ZB‐N was prepared and was incorporated with ethylene vinyl acetate copolymer (EVA) to improve its flame retardance. The structure and morphology of PGS@ZB‐N were characterized by Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), and scanning electron microscopy (SEM), and it was confirmed that the PGS@ZB‐N hybrid had been successfully prepared. The flame retardancy and burning behavior of EVA/PGS@ZB‐N/EG (EG = expandable graphite) composite were studied through thermogravimetric analysis (TGA), limiting oxygen index (LOI), UL‐94 (by the vertical burning test), and cone calorimeter test (CCT) characterizations. The prepared EVA/PGS@ZB‐N/EG composite obtained an LOI value of 41.2% with the addition of 30 wt% PGS@ZB‐N/EG. It was found that EVA/PGS@ZB‐N/EG was protected through a gas phase and condensed phase alternating synergistic effect mechanism.     

Growth behavior of aluminum borate whiskers on zirconia toughened alumina (ZTA) particle surface

In this work, B₄C-covered zirconia-toughened alumina (ZTA) particles are prepared and oxidised at 1050 °C for different times (0, 2, 4, and 8 h) in air. The X-ray diffraction and electron probe micro-analysis results show that the covering layer is mainly composed of oxide B₂O₃ intermetallics, residual B₄C particles, and Al₁₈B₄O₃₃ whiskers. The scanning electron microscopy results show that the growth of Al₁₈B₄O₃₃ whiskers on the ZTA particles enhances with increasing heat preservation time; the optimum holding time is determined to be 8 h Al₂O₃ in the ZTA particles diffuse into the covering layer and combine with B₂O₃ to form Al₁₈B₄O₃₃ whiskers; the Al₁₈B₄O₃₃ whiskers grow via the liquid-solid mechanism.     

RF磁控溅射制备钛酸锶钡BST纳米薄膜

钛酸锶钡(BST)薄膜作为一种高K介质材料在微电子和微机电系统等领域具有广阔的应用前景,人们已对BST薄膜的制备工艺技术和介电性能进行了大量的研究。BST纳米薄膜的制备工艺直接影响和决定着薄膜的介电性能(介电常数、漏电流密度、介电强度等)。对RF磁控反应溅射制备BST纳米薄膜的工艺技术进行了综述。从溅射靶的制备、溅射工艺参数的优化、热处理、薄膜组分的控制,及制备工艺对介电性能的影响等方面,对现有研究成果进行了较全面的总结。     

低品位硼矿的富集加工技术

报道了青海大柴旦地区低品位硼矿富集加工的新工艺，该工艺使硼矿品位30％－35％，B2O3收率大于80％，该工艺路线已工业化。     

硼酸铝晶须增强环氧树脂和双马来酰亚胺树脂体系的研究

本文以硼酸铝晶须为增强剂，以4，5-环氧环己烷-1，2-二甲酸二缩水甘油酯(TDE-85)，甲基纳狄克酸酐(MNA)、N，N’-二胺基二苯甲烷型双马来酰亚胺(BMI)/O，O′-二烯丙基双酚A(BA)体系分别作为基体制备晶须增强复合材料。研究了晶须对树脂的尺寸、表面处理方法、含量对树脂体系力学性能和热性能的影响；通过扫描电子显微镜(SEM)分析了浇注体的弯曲、冲击断口，研究晶须的增强机理。     

Effect of temperature on methyl radical generation over Sr/La2O3 catalysts

The role of gas phase CH₃ radicals in the oxidative coupling of CH₄ over 1 wt% Sr/La₂O₃ is supported by the observations that (i) this is a very effective catalyst for the generation of CH₃ · radicals and (ii) the concentration of CH₃ · radicals increases with temperature over the range of 450 °C–800 °C.     

粱南输油管线防垢技术的研究与应用

针对梁南结垢的具体情况，探讨了输油管线结硫酸盐垢的原因及影响因素，指出了化学防垢的可行性。室内成功研制出DY-2阻垢剂，现场应用后有效地预防了硫酸钡、锶垢的形成。     

溶胶-凝胶法制备(Sr,Pb)TiO3纳米晶粉及表征

采用溶胶－凝胶法成功地合成了（Sr,Pb)TiO3纳米晶粉，并利用FTIR技术对凝胶的形成过程及350℃，1．5h煅烧获得的粉体材料进行了表征。实验以TG－DSC分析作为拟定煅烧温度的依据，以XRD作为煅烧产物的分析手段，最佳煅烧温度为600℃，所合成的（Sr,Pb)TiO3纳米晶粉的平均晶粒尺寸约为21nm，属钙钛矿型立方顺电相结构。     

液膜法分离富集,测定水中微量锶

用乳状液膜体系对锶进行分离富集，该体系包括协同流动载体（ＰＭＢＰ，ＴＢＰ），表面活性剂（ＳＰＡＮ８０）增强剂（丙三醇）溶剂（正己烷）和内相（１．２ｍｏｌ／Ｌ的盐酸溶液），实验表明，在适宜的条件下，锶的富集效率可达９９．５％以上，而在此条件下许多共存离子，如Ｆｅ＾３＋，Ａｌ＾３＋，Ｃａ＾２＋，Ｍｇ＾２＋，Ｂａ＾２＋，Ｃｒ＾３＋，ＣＯ＾２＋，Ｎｉ＾２＋，Ｚｒ＾４＋，Ｃｕ＾２＋，Ｚｎ＾２＋，Ｐｂ＾２＋和     

高纯纳米碳酸锶干燥设备的选型和使用

微波干燥器用于干燥高纯纳米碳酸锶,其热效率比传统干燥方法提高5%～10%,可达80%以上,生产环境大大改善,提高了碳酸锶的干燥技术水平。