The origin of the modulated structure in Sr2CuO3+δ (δ = 0.4): [CuO2] in-plane oxygen vacancy or apical oxygen vacancy?

We propose the question of the modulated structures of copper oxide is caused by the [CuO₂] in-plane oxygen vacancy or apical oxygen vacancy. Sr₂CuO_3+δ single-crystal samples were prepared using high-temperature and high-pressure methods. The major phase of Sr₂CuO_3+δ (δ = 0.4) single-crystal system is found to be constituted by the 5 a modulated structure with the Fmmm space group, which originates from the [CuO₂] in-plane oxygen vacancy appearing in octahedral Cu-O. Besides, the presence of the [CuO₂] in-plane oxygen vacancy may obliterate the superconductivity of the system. Experimental results deduce that the oxygen vacancy may appear in the apical oxygen sites in high-temperature copper oxide superconductors.     

Long multifilament Bi-2223 Ag-sheathed superconducting tapes and solenoids

Multifilament Ag-sheathed BiPbSrCaCuO (2223) superconducting tapes containing 49 filaments were fabricated by the powder-in-tube route and the roll-anneal process. The transport critical current densityJ _c was 1.3×10⁴ A cm^–2 at 77 K and 7×10⁴ A cm^–2 at 4.2 K in self-field. A 12-m-long tape was used to construct superconducting solenoids (50, 28, and 14 mm internal diameters) generating dc fields 380–1070 G at 4.2 K. Measurements of the variation ofJ _c with field (0–1.6 T) and bend strain (0–5%) are used to explain the performance of the solenoids. The critical bend strain of tapes was about 1.5%.     

Magnetization and rotation of MTG HTSC ring in magnetic field

The magnetization of a melt-texture growth (MTG) HTSC ring has been studied. It is shown that the magnetic field inside the ring is larger than the external field under a certain range of external magnetic fields. We have also investigated the magnetic field dependence of the response of a detective coil near a rotating superconducting ring. The responses of the MTG sample are different for different cooling methods.     

Doped silicon and NIS junctions for bolometer applications

We discuss the performance, of a normal metal hot electron bolometer (NHEB) that we have measured at 0.3 K. We found that the noise equivalent power was limited by the amplifier noise. To improve the NHEB power response and to make it more robust and reliable we propose to substitute the normal metal with heavily doped silicon. The heavily doped silicon behaves like a metal with lower carrier concentration and has a smaller electron–phonon thermal coupling. We have fabricated superconductor-doped silicon-superconductor contacts (S-Sm-S) and we have used them as thermometers and coolers.     

Operation of superconducting fault current limiter using vacuum interrupter driven by electromagnetic repulsion force for commutating switch

Using conventional high‐temperature superconducting wire, a model superconducting fault current limiter (SFCL) is made and tested. Solenoid coil using Bi2223 silver sheath wire is so made that inductance is as small as possible and a vacuum interrupter is connected in series to it. A conventional reactor coil is connected in parallel. When the fault current flows in this equipment, superconducting wire is quenched and current is transferred into the parallel coil because of voltage drop of superconducting wire. This large current in parallel coil actuates magnetic repulsion mechanism of vacuum interrupter. Due to opening of vacuum interrupter, the current in superconducting wire is broken. By using this equipment, current flow time in superconducting wire can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of parallel coil. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 52–61, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20315     

The Holographic study for the high T_c superconductor YBCO and recent development of studies of a class of inverse problems

A dream or interesting problem is to obtain more information based on one measurement,for example to obtain all the thermodynamic functions based on specific heat only. We call it“holographic“study.After more than 10 year‘s efforts,we suggest one possibility(or only one)is to solve an inverse problem(specific heat-phonon spectrum inversion,SPI).In this talk we will review recent development of studies of a class of inverse problems,including Dai‘s exact solution and Chen‘s formula and their unification.T...     

Effect of bismuth replacement at barium site in Y-Ba-Cu-O system

X-ray diffraction, electron paramagnetic resonance, microwave absorption and resistivity measurements were carried out on YBa_2−x Bi _x Cu₃O₇ (0≤x≤0·5) superconductors in order to study the effect of bismuth on the structural and superconducting properties. A decrease in sintering temperature increased the amount of impurity phase. Transition from an orthorhombic (superconducting) phase to tetragonal structure produced no significant change in EPR zero-field signal at liquid nitrogen temperature (LNT). The non-resonance signal height decreased on higher concentration of bismuth. Sintered YBa_2−x Bi _x Cu₃O₇ superconductor had a strong EPR zero-field signal at LNT. We have evaluated particle size from XRD and EPR studies. The average particle size was about 0·4μm.     

Improvement of levitation characteristics in a magnetic bearing system using HTSC‐permanent magnet hybrid structure

Magnetic bearing using pinning force of a permanent magnet and a high‐temperature superconductor has been developed. Additional permanent magnet is introduced to increase the levitation force of the magnetic bearing. In this hybrid magnetic bearing system, levitation force is mainly given by the repulsive force of the permanent magnets, and stability for the lateral direction is given by pinning force of the superconductor. The experimental device is developed. A ring‐type superconductor and a bulk one are examined. Levitation characteristics of the hybrid magnetic bearing are measured. The bulk superconductor shows better characteristics of both levitation and lateral stability than the ring one. Levitation force of the hybrid system becomes about twice as large as that of the nonhybrid one. Although, the repulsive force of the permanent magnet decreases the lateral stability of the system, its influence becomes small by choosing an adequate position of the permanent magnets and the superconductor. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 71–77, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10350     

Dislocations and flux pinning in YBa2Cu3O7

The dislocation structures of bulk textured and epitaxial thin film YBa₂Cu₃O₇ superconductors are examined. Correlations between increases in flux pinning and dislocation densities are noted. A model for flux pinning by individual dislocations is presented. This gives a treatment of strain induced effects and effects of normal state region interactions. It is shown that the values of pinning predicted are in line with experimental observations.     

Effect of praseodymium substitution on the growth and properties of Y1−x Pr x Ba2Cu3O7−δ (o <x < 0·4) single crystals

In the present paper, a modified self-flux technique has been successfully employed for the growth of pure and praseodymium substituted (partially) large single crystals of high temperature superconducting Y_1−x Pr _x Ba₂Cu₃O_7−δ (x = 0·0,0·2,0·4). Typical sizes of the platy and bulky crystals of pure YBCO(123) material are ≈ 2 × 2 × 0·1 mm³ and 4 × 1 × 1 mm³, respectively. In case of Pr-substitution, the typical sizes of platy and bulky crystals of Y_0·8Pr_0·2Ba₂Cu₃O_7−δ and Y_0·6Pr_0·4Ba₂Cu₃O_7−δ materials are ≈ 2 × 3 × 0·1 mm³ and 5 × 1 × 1 mm³ and ≈ 1 × 1·5 × 0·1 mm³ and 7 × 0·2 × 0·1 mm³, respectively. The morphology and growth habit of the as-grown single crystals and the critical transition temperature (T _c) of the oxygenated crystals were found to depend on the Pr-content. Paper presented at the poster session of MRSI AGM VI, Kharagpur, 1995