Mining fleet management systems: a review of models and algorithms

The objective of this paper is to review and document the mine fleet management systems’ models and algorithms. The purpose is to understand the algorithms behind the fleet management systems and the proposed academic solutions in this area to identify any gaps in the current literature and to open up opportunities to establish research questions that need to be addressed in an integrated simulation and optimisation operational planning research framework. In this paper, we review industrial fleet management systems and the main academic algorithms behind such systems. The fleet management systems are divided into three subsequently related problems to review: shortest path, production optimisation and real-time dispatching. Finally, the limitations of current algorithms for fleet management systems are documented in terms of mining practice feasibility and optimality of the solution on large-scale problems. The results of this literature review enable us to evaluate the logical links between major components of an integrated simulation and optimisation operational planning framework with current theory of fleet management systems.     

动态汽车衡测量结果的不确定度评定

本文主要介绍了在动态汽车衡的试验过程中不确定度来源,并以动态试验为例重点介绍了计算各分量的标准不确定度、合成标准不确定度以及扩展不确定度的方法.     

水浴法加温液氧泵

1　故障现象一次 ,我们用KL -1 5型制氧制氮车开机制氮 ,给一只容积为 40升、最高工作压力为1 4 7MPa的气瓶灌充氮气 ,当气瓶充气压力升高到一定值时不再上升。反复开泵 ,压力基本不变。液氧泵停止时 ,出口压力无明显下降。经分析判断导致气瓶压力升高到一定值时不再上升的原因是由于液氧泵被冻结所致。2　排除方法首先关闭液氧泵。拧开制冷机氢气放气阀 ,使压力下降到 1 0MPa。开大放气阀 ,使二级压力保持在 0 3 5MPa左右。调整正流空气调节阀 ,调节好中部温度。关闭液氮进液氧泵阀和气氮出液氧泵阀。戴棉布手套 ,拆开液氮进口接头、…     

运用炸药混装车技术开采堆石坝级配料

葛洲坝集团公司成功地将乳化炸药混装车技术引入三峡水电工程的土石方开挖中，取得了良好的效益，在国内还未曾有人将该技术应用于堆石坝级配料开采。本文结合清江水布垭工程爆破试验，对运用混装车技术开采堆石料进行了研究。事实证明：把混装车技术引入堆石坝级配料开采可大大提高开采强度，降低工程成本；增加细颗粒石料，优化堆石料级配；爆破效果良好，安全可靠。     

基于专家系统的汽车衡故障传感器判别

传感器是自动化设备的核心部件,传感器故障检测显得尤为重要。针对目前汽车衡维护、检修的困难,为有效准确判断故障传感器,提出了以径向基函数神经网络（RBFNN）预估值的初始化数据库专家系统判别方法。经现场测试准确率达到96%以上,从而有效简单地判定传感器好坏和识别故障传感器的位置。     

大型矿车用减速机齿轮系统的疲劳分析

提出一种基于"放大因子"、采用二维平面单元模拟三维实体动态工况的计算疲劳的方法,对某矿车减速机齿轮系统进行疲劳分析,得到太阳轮、行星轮和扭力管在不同抗拉强度下的疲劳寿命.结果表明:太阳轮和扭力管最易发生疲劳破坏;齿轮寿命对抗拉强度的依赖性较敏感;得出的齿轮系统热处理后的抗拉强度建议值能为设计提供参考,且该方法能大大提高计算效率.     

尼龙斜交载重轮胎早期损坏原因及解决方法探讨

针对尼龙余交载重轮胎使用过程中出现的早期损坏，分析了其使用因素和设计因素，从配方设计、结构设计等方面提出了相应的解决方法。同时认为加强工艺控制与结构、配方设计对轮胎性能的影响同等重要。     

试议港口集卡调度算法模型分析

随着我国集装箱吞吐量的快速增长,集装箱港口对作业效率的要求也越来越高。在现有作业技术水平和硬件设备、设施的基础上实现作业效率的提高,已经成为集装箱港口发展所面临的重要问题。从集装箱港口作业的一个环节——集卡作业入手,分析提高集卡利用率,进而带动整个港口作业效率的提高。     

7.50-16 12PR轻型载重轮胎的优化设计

介绍轻型载重轮胎的优化设计。采取的主要措施是：减小轮胎外缘尺寸，外直径由８０８ｍｍ减至７９８ｍｍ，断面宽由１９８ｍｍ减至１９５ｍｍ；胎面花纹以纵向花纹为主，肩部为纵横结合花纹并加深肩部通挖花纹沟的深度，改善肩部生热；胎体帘布采用加粗减层的方法，用６层１８７０ｄｔｅｘ／２尼龙帘布代替８层１４００ｄｔｅｘ／２帘布。优化轮胎重量减轻４ｋｇ，轮胎性能符合国家标准。     

Dynamic reaction inside co‐rotating twin screw extruder. I. Truck tire model material/polypropylene blends

Waste ground rubber tire (WGRT) is a complex composite containing various elastomers, carbon black, zinc oxide, stearic acid, processing oils, and other curatives. Most of the waste ground rubber tire is composed of mainly natural rubber (NR) and styrene butadiene rubber (SBR) in varying proportions. Blending it with other thermoplastic materials is difficult due to the inherent thermodynamic incompatibility. But, the compatibility can be increased by making the reactive sites in WGRT with suitable chemicals under optimum condition of shearing inside a twin screw extruder and it is said to undergo a dynamic reaction inside the extruder. To understand the mechanism of dynamic reaction process of a rubber/polyolefin blend, the blending of a truck tire model material rubber with polyolefin was first tried before it was applied to waste WGRT material. It was observed that the blends of a truck tire model rubber material and PP thermoplastic are physical mixture of two incompatible polymers in which a continuous plastic phase is largely responsible for the tensile properties. The rubber particles are the dispersed phase. The large particle size and the poor adhesion of these rubber particles are believed to be liable for the poor tensile properties. In case of blends of truck tire model material with isotactic polypropylene the tensile properties are found to be lower than that of its PP‐g‐MA counterpart which can be attributed to the reaction of the MA with the carbon black particles. A schematic representation of the possible interactions has been proposed. The effect of addition of compatibilizers such as SEBS and SEBS‐g‐MA has also been studied. The tensile and TGA studies indicate that the polarity of SEBS and SEBS‐g‐MA induces an increase in the performance characteristics for both types of polyolefins but the intensity of this increase is higher in the PP‐g‐MA based blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 106: 3193–3208, 2007