多带OFDM-UWB系统峰均功率比降低方法研究

针对多带OFDM—UWB信号存在高峰均功率比的问题，提出了利用扩展与交织降低系统信号峰均功率比的方法。该方法通过对传输数据进行正交扩展与交织，使得进入多载波调制的数据趋于高斯分布，减小了传输数据自相关函数的旁瓣峰值，降低了OFDM-UWB信号的峰均功率比。由于采用正交矩阵进行扩展，扩展前后的数据传输速率保持不变。仿真结果表明，扩展与交织可以有效地降低信号峰均功率比2-5dB左右。同时该方法还具有抗窄带干扰的鲁棒性。     

带通采样在数据采集中的应用研究

在数据采集中采用带通采样，可大大降低采样率，但系统中的抗混叠滤波器会造成相位的非线性。采用对滤波后的信号进行带通采样，然后再用FRR滤波器校正相位的非线性，从而不失真地还原原信号，最后在Matlab中进行仿真，验证了该方法的有效性。     

Bandpass filters using periodically loaded combline resonators

A novel combline filter is proposed for cellular‐radio base stations. The Q‐factor is significantly improved. The eigenvalue equation is expressed with the single‐team approximation in the gap region of the combline resonator. A two‐pole combline filter is designed. The calculation, simulation, and experiment results are presented and are in good agreement. © 2005 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

Results of the ASTM field test of tristimulus weighting functions

In 1993, the American Society for Testing and Materials carried out a field test of newly calculated tristimulus weighting factors. These weighting factors had been calculated by a method proposed by Venable. the test also included a method of correction for bandpass dependence put forth by Stearns. the purpose of the trial was to assess the possible reduction in bandpass dependence introduced by each of these sets of weights. A large number of sets of spectral data were gathered from the cooperators in the field test. Results of integration by the various sets of tristimulus weighting factors were calculated. A total of 15 120 color differences were calculated and statistics were derived to test the probable error resulting from each method of correction. Errors attributable to bandpass dependence were on the order of a few tenths to as much as one CIELAB unit when uncorrected weight sets were used. These errors could be reduced to a few hundreths of a CIELAB unit, and in some cases to a few thousandths of a unit, by employing one correcting strategy or the other. an overall mix of strategies was ultimately chosen to minimize the bandpass dependence over the entire range of weight sets. Utilizing this mixed strategy, the median error introduced into 10-nm integration by bandpass dependence was only 0.004 CIELAB units. © 1995 John Wiley & Sons, Inc.     

A Novel UWB Pulse Shape Modulation System

In this paper novel modified Hermite polynomial functions for use in impulse radio (ultra-wideband) communications are proposed. With these functions pulse shapes which are orthogonal and have nearly constant pulse width regardless of the pulse order are generated. These properties hold under the effects of differentiation. An M-ary communication system is constructed using these pulse shapes. A Matlab model for generating the pulses is designed and the effect of timing jitter on the performance of the system is investigated by computer simulation.     

短开路耦合谐振器加载的宽带带通滤波电路

提出了一种基于短开路耦合器加载的宽带带通滤波电路. 该滤波电路通过在输入和输出端口之间,并连加载短路耦合微带谐振器和开路耦合微带谐振器实现5个传输极点和3个传输零点的带通选择特性. 对所提出的短开路耦合谐振器进行了奇偶模理论分析,揭示了其传输零极点形成的物理机理. 最后,对所提出的滤波电路进行了加工测试. 测试结果表明,所提出的宽带滤波电路能够在2.0～4.2 GHz频率范围内实现 3 dB 带通传输,工作相对带宽为73%,仿真和实测结果吻合较好.     

宽频带范围下磁场能量收集的匹配网络设计

磁场能量收集技术是电磁环境中分布式传感器实现自供能的有效手段。与工频磁场和射频磁场等单一频率的磁场环境不同,电力变换器中的磁场分布具有宽频率范围特性。为了提高取能模块的功率密度,应尽可能多地在有限体积内收集能量,提出通过采用双级谐振-带通滤波网络。与此同时,基于相同取能线圈,充分对比了不同电流和负载特性下,单级谐振网络和双级谐振-带通网络的输出特性,归纳出双级谐振-带通网络的适用范围。     

超宽带传输参考接收机性能分析

在确定超宽带传输参考接收机模型的基础上,分析了基本TR接收机的误码性能,并在AWGN信道下进行了系统建模。仿真分析的结果表明,接收机的性能与脉冲对的重复数Ns、码元的积分时间以及接收机输入噪声带宽的大小之间均有规律可循,其适宜条件：Ns取3～5,标称积分时间等于脉冲宽度,噪声带宽应在保持正常接收时误码率为10-4或更低的水平选取。     

Design of Multi-band Small Antenna Based on Single Split-Ring Resonator

To use the single split-ring resonator(SRR)as a basic unit cell for small antenna with multi-band frequency response is proposed.The structure of antenna is consisted of a single spilt-ring resonator and a coupled microstrip line.The designed antenna is numerically optimized with CST Microwave Studio.The radiation properties of the antenna show that there are three frequency bands among which two bands are 1.3 GHz and 2.1 GHz ultra-wideband(UWB),respectively,where S11 is less than-10 dB.The gain at every fr...     

基于BOK调制的Chirp超宽带通信系统的Simulink仿真实现

介绍了基于BOK调制的Chirp超宽带无线通信系统的原理,从理论上分析了BOK解调时的误码率,并运用Matlab/Simulink构建了基于BOK调制的Chirp超宽带通信系统的仿真模型,实现了BOK调制、信号相干检测、误码率计算等功能,完成了在加性高斯白噪声信道下点对点的通信,给出了在AWGN信道中不同时间带宽积条件下的信噪比误码率仿真曲线.仿真分析结果表明,运用Simulink建立的超宽带通信系统模型对超宽带系统进行研究是切实可行的.