Exergoeconomic performances of the desiccant-evaporative air-conditioning system at different regeneration and reference temperatures

This paper presented the exergoeconomic evaluation of the developed desiccant-evaporative air-conditioning system. The developed system was evaluated based on the steady-state conditions at different regeneration and reference temperatures. The exergoeconomic evaluation method was implemented to the system components and the whole system to evaluate the exergy efficiency, exergy destruction ratios, cost rates, relative cost differences and exergoeconomic factors. The regeneration and reference temperatures affected the exergy efficiencies, exergy destruction ratios, cost rates, relative cost differences and exergoeconomic factors. The desiccant wheel, heating coil and evaporative cooler had a high cost rate (investment cost, operation and maintenance cost, and exergy destruction cost). The exit air fan, outdoor air fan and evaporative cooler had a high relative cost difference. The exit air fan, outdoor air fan and secondary heat exchanger had a high exergoeconomic factor. Replacement of the desiccant wheel with a higher dehumidification performance could decrease the high cost rate. A higher efficiency evaporative cooler and heating coil were needed. Cheaper air fans (outdoor air fans and exit air fans) were needed.     

An experimental evaluation of a residential-sized evaporatively cooled condenser

In this paper, the performance of an innovative evaporatively cooled condenser is compared with that of a conventional air-cooled condenser for a split heat pump system. The system was tested in an environmentally controlled test chamber that was able to simulate test conditions as specified by ASHRAE Standard 116. Tests to optimize refrigerant charge and short tube restrictor size were conducted using refrigerant HCFC-22. The wheel rotation speed of the evaporative condenser was also optimized experimentally to maximize the coefficient of performance. Using these optimum parameters, steady state and cyclic performance tests were conducted. The experimental results showed that the evaporative condenser has a higher capacity than the air-cooled condenser by 1.8 to 8.1%, a higher COP by 11.1 to 21.6%, and a higher SEER by 14.5%.     

Description and experimental results of a semi-indirect ceramic evaporative cooler

Evaporative cooling is used in industrial and air conditioning processes to reduce temperature in different fluids. Direct evaporation systems can lead to environmental problems such as Legionnaire's disease, and indirect systems reduce system efficiency.This work presents the manufacture, test bed set up and trials carried out on a ceramic evaporative cooling system which acts as a semi-indirect cooler. Depending on air characteristics, it may act as a sensible or enthalpic exchanger. The water cooled in a cooling tower, using the return air coming from the conditioned room (22 °C and 50% comfort conditions) goes through the ceramic pipes, exchanging sensible and latent heat with a current of outdoor air.The use of this recovery system is mainly in climates with a high temperature and humidity such as tropical environments where the system yields a decrease in supply air humidity, using the cooling power of return air.The tests presented show the system behaviour for various supply air conditions.     

A comprehensive design and rating study of evaporative coolers and condensers. Part I. Performance evaluation

The mathematical models of evaporative fluid coolers and evaporative condensers are studied in detail to perform a comprehensive design and rating analysis. The mathematical models are validated using experimental as well as numerical data reported in the literature. These models are integrated with the fouling model presented in an earlier paper, using the experimental data on tube fouling. In this paper, we use the fouling model to investigate the risk based thermal performance of these evaporative heat exchangers. It is demonstrated that thermal effectiveness of the evaporative heat exchangers degrades significantly with time indicating that, for a low risk level (p=0.01), there is about 66.7% decrease in effectiveness for the given fouling model. Furthermore, it is noted that there is about 4.7% increase in outlet process fluid temperature of the evaporative fluid cooler. Also, a parametric study is performed to evaluate the effect of elevation and mass flow rate ratio on typical performance parameters such as effectiveness for rating calculations while surface area for design calculations.     

Effect of regeneration temperatures in the exergetic performances of the developed desiccant-evaporative air-conditioning system

The developed desiccant-evaporative air-conditioning system was evaluated using the exergetic method under controlled environmental conditions to determine the performances of the whole system and its components.Percentage contributions of exergy destruction of system components at different regeneration temperatures and reference temperatures were determined. Exergy destruction coefficient of different components at different regeneration and reference temperatures were presented. It was shown that exergetic performances varied with respect to the regeneration and reference temperatures. The exergetic performances based on thermal, electric, total exergy input, first definition and second definition efficiencies were shown.Based on the results, reference and regeneration temperatures affected the determination of the system performances and its components. It was shown that air-heating coil, air fans and desiccant wheel contributed to large percentage of exergy destruction. Hence, the mentioned components should be given attention for further improvement of the system performances.     

Evaporative condenser control in industrial refrigeration systems

This paper is a result of a research project which focused on optimization of an existing industrial refrigeration system for a large two-temperature level cold storage distribution facility located near Milwaukee, Wisconsin. This system utilized a combination of single-screw and reciprocating compressors (each operating under single-stage compression), an evaporative condenser, and a combination of liquid overfeed and direct expansion evaporators. A mathematical model of the existing system was developed. The model was validated using experimental data recorded from the system. Subsequently, the model served as a tool to evaluate alternative system designs and operating strategies that lead to optimum system performance. The methods, analysis, and results presented in this paper focus on evaporative condenser sizing and head pressure control. Operating system head pressures that minimize the energy costs of the system were found to be a linear function of the outdoor wet-bulb temperature. A methodology for implementing the optimum control strategy is presented. Simulation results for the annual performance of the refrigeration system investigated in this project show a reduction in annual energy consumption by 11% as a result of the recommended design and control changes.     

Experimental performance of a direct evaporative cooler operating during summer in a Brazilian city

This paper presents the basic principles of the evaporative cooling process for human thermal comfort, the principles of operation for the direct evaporative cooling system and the mathematical development of the equations of thermal exchanges, allowing the determination of the effectiveness of saturation. It also presents the results of experimental tests in a direct evaporative cooler that take place in the Air Conditioning Laboratory at the University of Taubaté Mechanical Engineering Department, and the experimental results are used to determinate the convective heat transfer co-efficient and to compare with the mathematical model.     

Performance analysis of a solar cooling plant based on a liquid desiccant evaporative cooler

Summer air conditioning represents a growing market in buildings worldwide, with a significant growth rate observed in European commercial and residential buildings. Available heat driven cooling technologies can be used in combination with solar thermal collectors to reduce the load caused by air conditioning on the electric utilities and to reduce the environmental impact. This work reports a performance analysis of an open cycle solar cooling plant. The plant, installed in Northern Italy, is based on a liquid desiccant evaporative cooler coupled with a solar field. Experimental tests run during summer show average primary energy ratio and primary energy saving index of about 1.6 and 30%, respectively. Though this performance is satisfactorily, the regeneration unit always operated near the lower bound of the nominal temperature range. Therefore, optimization of the solar system design could lead to higher performance.     

Experimental study on cooling performance of air conditioning system with dual independent evaporative condenser

Evaporative condenser is an energy efficient and environmentally friendly air conditioning equipment. This paper proposed an air conditioning system using dual independent evaporative condenser and investigated the cooling performance. Many factors, such as evaporator water inlet temperature, compressor frequency, air dry-bulb temperature, air velocity and water spray rate, which influenced the cooling performances of air conditioning system with evaporative condenser have been investigated. The results indicated that cooling capacity and coefficient of performance (COP) increased significantly with the increasing of evaporator water inlet temperature (12–25 °C), the air velocity (2.05–3.97 m s⁻¹) and the water spray rate (0.03–0.05 kg m⁻¹ s). However, COP decreased with the increasing ambient air dry-bulb temperature (31.2–35.1 °C) and the compressor frequency (50–90 Hz). Furthermore, the heat transfer coefficient (K₀) was 232–409 W m⁻² K⁻¹ in different air velocity and water spray rate.     

A comprehensive design and rating study of evaporative coolers and condensers. Part II. Sensitivity analysis

Sensitivity analysis can be used to identify important model parameters, in particular, normalized sensitivity coefficients; by allowing a one-on-one comparison. Regarding design of evaporative coolers, the sensitivity analysis shows that all sensitivities are unaffected by varying the mass flow ratio and that outlet process fluid temperature is the most important factor. In rating evaporative coolers, effectiveness is found to be most sensitive to the process fluid flow rate. Also, the process fluid outlet temperature is most sensitive to the process fluid inlet temperature. For evaporative condensers, the normalized sensitivity coefficient values indicate that the condensing temperature is the most sensitive parameter and that these are not affected by the value of the mass flow ratio. For evaporative condenser design, it was seen that, for a 53% increase in the inlet relative humidity, the normalized sensitivity of the surface area increased 1.8 times in value and, for a 15 °C increase in the condenser temperature, the sensitivity increased by 3.5 times. The performance study of evaporative condensers show that, for a 72% increase in the inlet relative humidity, the normalized sensitivity coefficient for effectiveness increased 2.4 times and, for a 15 °C increase in the condenser temperature, it doubled in value.