AC—600反应堆压力容器设计探讨

本文根据 ALWR 的基本设计原则,初步分析了我国 AC-600反应堆压力容器的设计特点,探讨了保证 AC-600反应堆压力容器的可靠性应采取的主要技术措施.     

WDB620高强钢应用于大型蜗壳的焊接制造工艺研究

2005年初,水电十四局承担了漫湾二期水电站和小湾水电站蜗壳的制造任务。蜗壳钢材选用国产600 MPa级别高强钢,为了全面综合地考核该级别钢种的材料强度和安全裕度,检验模拟大型蜗壳焊接制造工艺的可靠性。对国产的WDB620高强钢进行了可焊性和制造工艺性试验研究,并在国内首次设计、制造模拟压力容器并对其进行水压试验和爆破试验。研究成果通过中国水电集团公司鉴定,结论为该课题研究成果达到国内选进水平。     

钒微合金Φ25mm热轧左旋带肋钢筋的研制与生产

通过对热轧左旋带肋钢筋（HRBL600）的质量特性分析,制定了热轧左旋带肋钢筋的化学成分,孔型设计方案和生产工艺。生产实践证明：该产品开发获得成功,产品质量达到标准要求。     

程控交换机收号系统模拟的研究

本文提出了一种模拟程控交换机收号系统的有效方法,采用消息驱动收号事件表的思想,运用并发控制技术,实现了在没有话路硬设备的条件下多用户同时拨号在线模拟收号控制的功能。本文提出的收号系统模拟方案已成功应用于某国产中大容量程控交换机的呼叫模拟系统中。     

网络安全管理

就网络安全管理的几个方面进行了简述,提出了按照不同维度对网络安全管理进行深入管理和保护的思路和方法。     

Characterization of ramie yarn treated with sodium hydroxide and crosslinked by 1,2,3,4‐butanetetracarboxylic acid

Ramie yarns were treated with various concentrations of NaOH at room temperature and subsequently crosslinked with 1,2,3,4‐butanetetracarboxylic acid (BTCA). The microstructure and tensile properties of the treated yarns were characterized. X‐ray diffraction (XRD) and FTIR were used to study the crystalline structure of the resultant ramie yarns. The results showed that the maximum change in the structure of the alkali‐modified ramie took place at 16% NaOH, which would completely transform cellulose I to cellulose II. At the same time, the crystallinity index and fiber orientation decreased to the minimum value while the absorption properties were enhanced. The average degree of polymerization (DP ) of the treated ramie yarns slightly decreased after NaOH treatment. Tensile properties including tenacity, breaking elongation, and modulus of the treated yarns were also investigated. Scanning electron microscopy (SEM) was used to investigate the breakage of the treated yarns. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1857–1864, 2004     

Influence of the preparation conditions on the properties of gold catalysts for the oxidation of glucose

In this work, two deposition–precipitation methods for the preparation of gold catalysts for glucose oxidation were investigated. Thus far, gold colloids immobilized on carbon have been used for catalytic glucose oxidation, but the long-term stability of these systems was not sufficient. To improve the long-term stability we used the deposition–precipitation methods using NaOH (DP NaOH) or urea (DP urea) as precipitation agents as they were described by Haruta and Dekkers, respectively, using alumina as a support material. With these methods, it was possible to prepare highly active and selective catalysts which showed an excellent long-term stability. DP urea was found to be the preferred method, because in contrast to DP NaOH, no losses of gold occurred during the preparation, and it was possible to adjust various gold contents up to 10 wt% Au.     

600MW超临界燃煤机组SCR烟气脱硝工程实例

介绍了国电铜陵600 MW超临界燃煤机组安装脱硝装置项目的前期研究、主要设计特点、系统设计、调试运行,以及投产运行后的经济情况,得出了一系列火电项目加装脱硝设施建设与运行方面的参考意见.     

纯棉抗皱织物甲醛含量与测试方法的相关分析

对织物上甲醛含量的测试方法,我国有两项国家标准,分别规定了游离甲醛和释放甲醛的测试方法。本文通过中国国标的两种甲醛测试方法对抗皱处理后的纯棉织物进行测试,得出两种测试方法的相关关系,蒸汽吸收法测试的甲醛含量远远大于水萃取法测试的游离甲醛含量。随着树脂浓度的增大,游离甲醛和释放甲醛的含量会增大;随着烘焙温度的增加,游离甲醛逐渐增加,释放甲醛含量呈下降趋势。     

基于PROFIBUS-DP总线的智能采集控制器

介绍了基于 PROFIBUS-DP总线的智能采集控制器研制 ,该控制器可应用到现场设备的数据采集及控制