无碱玻璃纤维池窑用高致密锆英石砖的研究

采用高纯锆英石为主要原料 ,研究了几个关键工艺因素对高纯高致密锆英石砖性能的影响。结果表明 ,原料纯度、外加物种类及其加入量和烧成温度是获得优质高致密锆英石砖的关键。显微结构分析结果显示 ,这种砖晶粒间呈交错网络结构 ,直接结合程度极高 ,并具有良好的抗玻璃液的侵蚀性和渗透性。扫描电镜检验发现 ,玻璃液渗入砖内与砖反应 ,首先溶解Al2 O3、R2 O等组分 ,然后溶解锆英石 ,并析出斜锆石晶粒 ,呈岛状分布于玻璃液中 ,破坏了砖的原始直接结合结构 ,导致砖的解体。     

Brønsted acidity study of fiberglass materials by H/D-exchange

The kinetics of hydrogen isotopic exchange over fiberglass materials and reference samples (SiO₂, H₃PO₄/SiO₂, and HZSM-5) was studied at 500 °C under the dynamic adsorption–desorption equilibrium. The concentrations and H/D-exchange rates of different Brønsted acid sites (BAS) were determined using the numerical modeling of isotope exchange dynamics. The correlation between H/D-exchange rate of reference samples and their acidity determined by FTIR spectroscopy of adsorbed CO was established. Based on this correlation, the strength of BAS in fiberglass materials was shown to be comparable to that of HZSM-5 zeolite.     

Unglazed Fiberglass Reinforced Polyester Solar Water Heater with Integrated Storage System

Theoretical and experimental investigations on an unglazed solar hot water heater with integrated storage system were conducted. The system was comprised of a collector and storage tank which was integrated into one unit. All parts of the system have been fabricated from fiberglass reinforced polyester (GFRP). The absorber plate has water tubes of semielliptical shape. The width and length of the absorber plate were 1.4 and 1.8?m, respectively. The absorber plate was fabricated from GFPR using a special resin composition that provides good thermal conductivity and absorptivity. The storage tank has a capacity of 496?L. The storage tank is of sandwich construction with a core material made of polyurethane foam that combines stiffness and lightness of the structure with very good thermal insulation properties. An average tank temperature of 53°C was achieved at an average solar radiation level of 700?W/m2 and ambient temperature of 28°C. The thermal efficiencies of the system were evaluated at 48 and 57% for cloudy and clear days, respectively. Transient performance of the system was predicted by solving the mathematical models consisting of energy balance equations of the system that have been converted to finite difference form and solved by a personal computer. The experimental results were in close agreement as has been found with the theoretical predictions.     

变频器在玻纤布生产中的应用

本文主要介绍宁茂变频器RM5（8903）系列在玻纤布生产线中的应用。     

聚乙烯涂覆玻璃纤维纱窗布的开发研究

简述了PE涂覆玻璃纤维纱窗布的涂覆工艺、产品性能、技术参数及其对产品质量的影响因素;介绍了该产品的推广及应用情况。     

玻璃钢——钢混合抽油杆柱系统设计方法

在前人工作的基础上，提出了一种新的玻璃钢－－钢混合抽油杆柱的设计方法－－系统设计法。     

玻璃钢杆抽油井深井泵防冲距的理论探讨及计算

国内在玻璃钢抽油杆的应用中，杆柱断脱现象比较严重，本文通过对影响玻璃钢杆抽油井深井泵防冲距各因素的分析和计算，发现目前现场设计防冲距所采用的经验公式误差太大，是造成杆柱断脱的因素之一。为解决这一问题，本文提出了一套计算防冲距的公式。     

Linear viscoelastic behaviours of bituminous mixtures and fiberglass geogrids interfaces

One major research topic is to characterize the mechanical behaviour of actual reinforced pavement structures from laboratory experimentation and take it into account for the design. This investigation aims to verify the effect of fiberglass geogrid presence on interface linear viscoelastic (LVE) behaviour separately and as a system along with the bituminous mixture layers. To conduct the research, two different fiberglass geogrids, with ultimate tensile strength (UTS) of 100 and 50 kN/m, and tack coat made of straight-run bitumen and modified by polymer were combined for the fabrication of three reinforced configurations. In addition, two unreinforced configurations were also fabricated. The first was a single layer slab and the second was a double-layered slab composed of two bituminous mixtures (same type) bonded layers by a tack coat. Complex modulus tests were carried out in specimens cored in two different directions, vertically (V) and horizontally (H) cored. The experimental data were fitted using the 2 Springs, 2 Parabolic Elements and 1 Dashpot (2S2P1D) model. The test results showed that all interfaces’ complex modulus obtained for V specimens were LVE. Moreover, complex viscous properties of the interfaces were obtained from the used binder. The interface containing polymer modification presented the highest stiffness.