排序方式: 共有255条查询结果,搜索用时 15 毫秒
1.
The oxidation behavior in air at 973 K of theaustenitic stainless steels 18Cr8Ni and17Cr-2.5Ni-10.5Mn-2Cu-0.17N (low-nickel content), wasstudied in a thermobalance. The steels were heated fromroom temperature up to 973K at 10 K min-1, oxidizedfor 80 hr and then cooled to room temperature at 80 Kmin-1. The two steels had the same weightgains, 0.18 mg cm-2, which is equivalent tooxidation layers about 1.15 m theoretical thickness. In both cases, thegeneral shapes of the WS-1 (mgcm-2) curves vs. t (hours) were parabolic,but X-ray diffraction of the oxidized surfaces, surfaceand crosssection optical microscopy and SEM observations and EDSmicroanalysis show important differences betweenthem. 相似文献
2.
Gary Allenby Kathy Dodgson Paul Harper Adel Kassam Michael Leam Ian Dale Elaine Sullivan 《Journal of The Association for Laboratory Automation》2001,6(5):48
Advances in the field of automation have meant hitherto complex manual cell-based assays can now be automated. These improvements have brought significant enhancements in throughput, data fidelity and consistency, and allowed a reallocation of constrained resources.Building upon these improvements, we have linked our automated cell-based screening system, Assay Platform™, to Activity Base (IDBS), a software package designed to automate the analysis of HTS data. Customisation of this package has resulted in software that can identify ‘active’ compounds and re-pick them ‘on the fly’ from the original compound plates for triplicate re-testing without operator intervention.Based on an operator initially defining ‘normal’ parameters for assay activity in Activity Base, combined with an automated quality control software module that checks data fidelity, wells containing ‘active’ compounds can be re-picked and re-tested at the end of an automated screening run. Automating cell-based assays has significantly improved productivity, and, with the synergism of Activity Base, has given us greater power to complete each screening run and report ‘active’ compounds to Chemistry more rapidly. This article presents our approach to the automation of cell-based Fluorescent Imaging Plate Reader (FLIPR) screening together with automated active re-test confirmation using Activity Base. 相似文献
3.
《钢铁冶炼》2013,40(6):414-424
AbstractMagnesium aluminate spinel (MgAl2O4) is an excellent castable refractory product due to its high temperature thermal, chemical and mechanical properties. Alumina spinel castables are produced by addition of synthetic spinel or in situ spinel formation during the firing process. In the first part of the experimental studies, alumina rich MgAl2O4 spinel castable was produced using a solid state reaction technique. Tabular alumina and sea water magnesia (<100 μm) were used as starting raw materials. In the second part of the experimental studies, commercial synthetic spinel added castables were produced. In order to compare experimental results, both parts of the experimental study involved compositions with the same proportions of MgO. α-500 hydratable alumina was used as binder. Castables were sintered at 1500 and 1600°C. Water absorption, apparent porosity, bulk density and cold crushing strength values were considered and the optimum sintering temperature, proportions of synthetic spinel and sea water magnesia were determined. The XRD patterns confirm the phase formation of MgAl2O4. Moreover, the physical properties of the castables were supported by this XRD analysis. Scanning electron microscopy investigations of the fired samples were carried out to compare the effect of synthetic spinel addition and in situ phase formation on the physical properties of the castables. The mechanism of slag penetration to two types of zero cement castables for steel ladles was examined and the penetration layer chemically analysed by energy dispersive X-ray analysis studies. 相似文献
4.
《钢铁冶炼》2013,40(8):597-602
AbstractIn the last decades the European steel industry has made continuous efforts to reduce residues and byproducts and to increase recycling in order to reduce its environmental impact. While some steelmaking slags have been widely characterised and, to a certain extent reused, ladle furnace (LF) slag is used in different applications because of its specific properties. The main purpose of the case study presented in this paper concerns the reduction of potential LF slag environmental impacts, because of its intrinsic physicochemical properties. During the handling and cooling of LF slag, it disintegrates into a powder due to instability of the dicalcium silicate, causing an increase in dust emissions to the environment. The approach presented in this paper aims to reduce this phenomenon in order to achieve a more sustainable solution in term of reduction of powder dispersion in the environment, of costs saving and of nuisance reduction in the surroundings areas. 相似文献
5.
《钢铁冶炼》2013,40(6):514-518
AbstractThe present study was carried out to investigate the impact of slag– refractory lining reactions on the formation of inclusions during ladle treatment of steel. The experiments were conducted on an industrial scale in the ladle at Uddeholm Tooling AB in Hagfors, Sweden. The inclusion chemistry and population during ladle treatment were studied along with the composition of the ladle glaze, taken from the ladle lining. The inclusions in the steel were classified into four groups according to the Swedish standard SS 111116. SEM/EDS analyses were carried out to identify the phases present in both the inclusions and the ladle glaze. The number of inclusions in the steel before deoxidation was found to increase with the ladle age, i.e. the number of times the ladle had been in use. A similar increase was also found after vacuum degassing and before casting. A great portion of inclusions before casting was found to be supplied by ladle glaze. This observation was further confirmed and explained by thermodynamic analysis. The present results show that ladle glaze is a major source of inclusions in the ladle at Uddeholm Tooling. 相似文献
6.
《粉末冶金学》2013,56(4):315-321
AbstractLow porosity powder metallurgy compacts have been manufactured from treated elemental iron and cobalt powders sintered at 1150°C under an H2(g) atmosphere. Their microstructures consist of an interconnected mixed oxide network which encapsulates both the iron and cobalt phases. The production technique employed is an innovative process termed reacto-thermitic sintering (RTS), which leads to near full density and near net shape parts utilising conventional uniaxial compaction and mesh belt furnace practices. The RTS technique relies on microscale exothermic reaction between small quantities of added elemental Al and oxides present on the surface of the bulk powder, together with the bulk powder itself. This results in the production of a transient liquid phase which freezes rapidly and consolidates the compact without slumping. In order to generate an interconnected mixed oxide network, experiments were designed such that the Al powder reacts with the cobalt and the surface of the iron powder which is artificially doped with Fe and Cr oxides.Differential thermal analysis (DTA) and energy balance calculations revealed that the Al and the oxide coating reaction does not proceed directly. Instead the main contribution to the exothermic process is the reaction between Al and Co/Fe. The system does not exhibit true RTS behaviour and the interconnected network of mixed Al, Cr, and Fe oxides is created by subsequent reaction of Co-Al and Fe-Al intermetallics with the artificial Fe-Cr oxide coating on the Fe. The microstructure obtained exhibits negligible porosity with the metallic particles on the whole fully encapsulated by the oxide. 相似文献
7.
AbstractMetaliron powders of well controlled size and morphology were synthesised by thermal decomposition under hydrogen of precipitated ferrous oxalates. Green compacts were prepared by uniaxial pressing of metal powders at 290 MPa. The bending green strengths of compacts were measured.The precipitation of β-FeC2O4.2H2O oxalate from ammonium oxalate gives rise to the formation of spherical particles by aggregation ofelongated grains. Thermal decomposition of this oxalate from 400 to 500°C under hydrogen permits metal iron particles with a rough surface to be obtained. Decomposition occurring above 500°C induces a smoothness of the particle surface. Metal particles synthesised at 500°C show both surface roughness and micrometer sized primary grains.This specific microstructure has allowed the highest value ofcompact green strength (31·7 MPa) to be obtained.Acicular shaping of the β-FeC2O4.2H2O particles precipitated from oxalic acid involves, after decomposition, an increase in the surface roughness and shape irregularity of the metal particles, owing to an entanglement of the elementary grains. An exceptional value (about 60 MPa) for the metal compact green strength was thus obtained for this type of powder. 相似文献
8.
9.
《Materials Science & Technology》2013,29(7):874-879
AbstractUse of numerical predictive methods such as finite element analysis is becoming progressively more common for modelling industrial hot metal working and forming processes. These tools are used not only to predict the thermomechanical behaviour of metals but increasingly to predict microstructural changes by linking them to physical models of recrystallisation and textural evolution. This paper describes the development and application of a fully integrated model for the prediction of thermomechanical and microstructural behaviour during multipass hot rolling of aluminium alloy AA 3104. Finite element code ABAQUS/standard has been used in the work and the process is modelled assuming plane strain conditions. It is shown that for this alloy the static recrystallisation which occurs during interpass cooling does not significantly influence the thermomechanical response during subsequent rolling passes. 相似文献
10.
《钢铁冶炼》2013,40(6):473-480
AbstractThis study investigates some effects of austenite microstructure on processes leading to copper hot shortness. Low carbon steels containing 0˙55 wt-% copper were subjected to two thermal profiles in an infrared image furnace with attached confocal scanning laser microscope: hold at 1150°C for 60 s; hold at 1150°C for 60 s, quench to 400°C, reheat to 1150°C. Heat treatments were conducted in dried/deoxidised argon to image microstructures. Subsequent samples were oxidised in air. The oxide/metal interface was studied in a scanning electron microscope. Additional confocal scanning laser microscope experiments involved melting copper directly on the steel. After quench/reheat, austenite grain size decreased by a factor of ~1˙7 and grain boundaries were redistributed. Copper evolved during the first heating was no longer found at boundaries. Results from direct copper exposure reveal an apparent effect of boundary character on copper penetration rate. Possible mechanisms by which hot shortness is affected are discussed. 相似文献