环境敏感因素对电站正常蓄水位选择的影响

卜寺沟水电站预可阶段正常蓄水位是考虑规划成果、地形、地质务件、梯级衔接、水库淹没、筑坝技术、水能资源利用等因素综合初选的.从理论角度分析,水库淹没时水库内寺庙的影响,按全部淹没进行经济补偿处理代价较小;其社会环境敏感因素对正常蓄水位的选择不应起决定性作用.但是,考虑到少数民族群众、僧侣和地方政府的要求,适当降低正常蓄水位,以减少对扎西日岗寺庙的影响,将带来较积极的社会影响.     

Elimination of organic matter present in wastewaters from the cork industry by membrane filtration

BACKGROUND: The first stage of the cork industrial process generates great volumes of wastewater with moderate to high organic pollutant content that must be purified using different procedures, such as filtration by membranes. RESULTS: The tangential filtration of these wastewaters was studied using two different laboratory equipments. In the first one, three ultrafiltration (UF) membranes were tested, with molecular weight cut‐off (MWCO) 100 kDa and 30 kDa, and two operating modes were used: total recycling of permeate and retentate streams, and in continuous mode, without recycling both streams. In the total recycling UF experiments, the influence of the operating variables on the permeate flux was first established. The effectiveness of the different membranes was determined by evaluating the rejection coefficients for several parameters that measure the global pollutant content of the effluent. The values found for these rejection coefficients were in the following order: ellagic acid and color > absorbance at 254 nm > tannic content > COD (chemical oxygen demand). In the continuous mode experiments, the fouling mechanism for each membrane was established by fitting the experimental data to various filtration fouling models given in the literature. The operating mode in the second equipment was batch concentration, and additional experiments were carried out with an UF membrane (2 kDa), and with a NF membrane (with MWCO in the range 150–300 Da). CONCLUSIONS: The three operating modes tested provided different rejection levels of organic matter; among them, the most effective procedure tested was batch concentration mode using a NF membrane. Copyright © 2007 Society of Chemical Industry     

Three dimensional boundary element analysis of internal cracks under sliding contact load with a spherical indenter

Using boundary element based three dimensional modelling for linear fracture mechanics, we present an analysis of cracking in a homogeneous medium subject to contact load. The proposed iterative solution procedure allows a simultaneous treatment of a reasonable number of partially closed cracks. It is shown that the most probable direction of propagation of a vertical internal crack is strongly dependent on its size compared to the contact radius and its location with respect to the axis of maximum normal load.     

Results of the ASTM field test of tristimulus weighting functions

In 1993, the American Society for Testing and Materials carried out a field test of newly calculated tristimulus weighting factors. These weighting factors had been calculated by a method proposed by Venable. the test also included a method of correction for bandpass dependence put forth by Stearns. the purpose of the trial was to assess the possible reduction in bandpass dependence introduced by each of these sets of weights. A large number of sets of spectral data were gathered from the cooperators in the field test. Results of integration by the various sets of tristimulus weighting factors were calculated. A total of 15 120 color differences were calculated and statistics were derived to test the probable error resulting from each method of correction. Errors attributable to bandpass dependence were on the order of a few tenths to as much as one CIELAB unit when uncorrected weight sets were used. These errors could be reduced to a few hundreths of a CIELAB unit, and in some cases to a few thousandths of a unit, by employing one correcting strategy or the other. an overall mix of strategies was ultimately chosen to minimize the bandpass dependence over the entire range of weight sets. Utilizing this mixed strategy, the median error introduced into 10-nm integration by bandpass dependence was only 0.004 CIELAB units. © 1995 John Wiley & Sons, Inc.     

Development of Solar Drying

Importance of Solar Drying is increasing worldwide, especially in areas where the use of the abundant, renewable and clean solar energy is essentially advantageous. In the developing countries and in rural areas the traditional open-air drying methods should be substituted by the more effective and more economic solar drying technologies.

R&D needs should be considered in the basic research and experimental fields; in performance measurement; in the modelling-simulation-design and testing. The international co-operation of experts should be improved and more efforts would be needed in the policy and in the public information.     

Evaluation of capital cost data. part 7: Liquid waste disposal with emphasis on physical treatment

Capital cost correlations are given for oil-water separators, equalization basins, primary clarifiers, clarifiers and clarifier mechanisms, reverse osmosis unit, ultrafiltration units, gravity filters and miroscreens. Data are included for raw sewage, intermediate and recirculation pumping stations and for preliminary treatment (or bar screens, grit removal, overflow and bypass chamber and Parshall flume), for grit removal, comminution and gas stripping. The correlations are accurate to ± 30%, expressed in Canadian dollars and adjusted to a Marshall and Swift value of 1000. Details as to what components are included in the cost are given. Data are given for the labour and material costs to create a working process module. For inflation indices, a critique of the Engineering News Record, EPA small city, Marshall and Swift, Chemical Engineering and Southam inflation indices suggested that the Marshall and Swift index is most appropriate for the construction and process equipment studied here. Concerning the currency exchange, for the equipment and processes in this study, equipment costs the same whether expressed directly in US or Canadian dollars. To put the current data into perspective, several hundred sources of cost data were analyzed. The major correlations are compared, on a consistent basis, with current data.     

磁头气膜浮动块浮动特性的影响因素

近年来，随着创新性技术的不断应用，硬盘驱动器的气膜浮动块（以下简称浮动块）也有了较大改进，例如浮动块表面的设计越来越精巧，而性能却更加稳定。因此很好的理解哪些因素是影响气膜浮动块浮动特性的主要原因显得尤为重要。分析这些因素对浮动块的影响结果，有利于我们改进浮动块的特性并对其发展前景做出预测，本文对这些影响因素做了概括总结。     

Comparison of three internationally certified firefighter protective ensembles: Physiological responses,mobility, and comfort

BackgroundFire protective ensembles (FPEs) are essential to safely perform firefighting job tasks; however, they are often burdensome to the workers. The aim of this study was to compare three internationally certified fire protective ensembles from the European Union (EU), South Korea (SK), and United States (US) on physiological responses, mobility, and comfort.MethodsTen male professional firefighters performed a battery of exercises in the laboratory following the ASTM F3031-17 standard to evaluate mobility, occupation-specific performance, and physiological responses (body weight, heart rate (HR), core temperature (T_c), breathing rate (BR), and rating of perceived exertion (RPE)) to 20 min of treadmill walking (3.2 mph, 5% incline). All participants carried out the evaluation wearing each FPE in a random order. Mixed effects models examined time (pre-vs. post-) by ensemble (EU, SK, US) interactions for all physiological variables and compared comfort, performance, and subjective variables across ensembles.ResultsNo interaction effects were observed for body weight, HR, T_c, BR, or RPE (p = 0.890, p = 0.994, p = 0.897, p = 0.435, and p = 0.221; respectively). SK had greater trunk flexion than EU (78.4° vs. 74.6°, p = 0.026) and US had lower standing reach than EU (105.5 cm vs. 115.4 cm, p = 0.004). Agility circuit time was lower in US (9.3 s) compared to EU (9.8 s) or SK (9.9 s) (p = 0.051 and p = 0.019, respectively).ConclusionsThe findings suggest that physiological burden remained largely unchanged across the international FPEs. However, mobility, performance, and comfort may be significantly influenced across types. International stakeholders and end users should consider design implications when choosing fire protective ensembles.     

The impact of risk and protective factors on online teaching experience in high school Italian teachers during the COVID-19 pandemic

The lockdown due to COVID-19 in Italy resulted in the sudden closure of schools, with a shift from traditional teaching to the online one. Through an online questionnaire, this survey explores teachers' experience of online teaching, the level of risk factors (e.g., stress) and protective factors (e.g., locus of control) and their impact on satisfaction levels during the social distancing. One hundred seven high school teachers from Lombardy, an Italian region very affected by the COVID-19 outbreak, participated. Results show that depression and stress are the main predictors of satisfaction levels for online teaching. In addition, coping, locus of control and self-efficacy emerge as important protective factors. Finally, although there is great satisfaction with the online teaching experience, critical elements emerged. This study is relevant because it describes the critical elements of the online teaching experience, and identifies some protective factors and the main risk factors in teachers operating in an area strongly marked by social restrictions imposed by the pandemic. High school teachers emerge as a sub-group of the general population with specific psychological reactions. Considering the results, it is possible to suggest providing high-quality educational support and crisis-psychological oriented services to teachers, and help to maintain the psychological well-being.