指纹考勤管理软件的研究与实现

针对企、事业单位原有的考勤系统，如打卡钟、磁卡、IC卡等考勤方式存在代打卡、卡丢失等不足和缺陷的实际，结合指纹识别技术，建立一套考勤、薪资、人事管理于一体的软件系统。给出了系统的体系结构和功能实现，能使企业考勤管理更加简便快捷、客观公正。并提出了进一步的发展方向和展望。     

利用茚三酮或DFO加强显现热敏纸张上的潜在指纹

本文介绍一种新技术——利用茚三酮或DFO加强显现热敏纸张上的潜在指纹。大部分热敏纸张的热敏剂表面,使用DFO或茚三酮石油醚溶液(NPB)显影时将会变黑。显现的指纹和背景之间反差很小。新技术介绍了在指纹和热敏层之间,用丙酮水洗,可以去掉黑色污斑。其它新的化学试剂漂洗,显现的指纹有清晰的纹线和很高的反差。大量使用这种技术,可以使试剂优化,成本降低,短时间内能处理大量检材。工作试剂包括商用、不挥发、含氮的有机化合物,也使用象NPB这样的浸透性试剂。     

高能超声处理Al-1Si合金凝固组织分析

采用高能超声处理Al-1Si合金熔体,借助金相显微镜和电子探针进行组织分析,并测定合金的熔化潜热,分析了熔体中超声空化效应和声流效应影响凝固过程的机理。结果表明,试样晶粒平均尺寸由超声处理前的94μm减小到超声处理后的34μm;合金试样的熔化吸热量由263.90J/g降低为159.81J/g,在熔体中施加高能超声显著改善了合金成分的均匀性并细化了晶粒。     

基于非下采样Contourlet变换的指纹图像超分辨率重建

非下采样Contourlet变换(Nonsubsampled contourlet transform,NSCT)采用非抽样金字塔结构和非抽样方向滤波器组构成,具有Contourlet变换所不具备的平移不变性、较高冗余度等优良特性,而且能够克服伪吉布斯现象。图像经过非下采样Contourlet变换后分解成多尺度、多方向的细节信息,这些细节信息代表了图像不同频带不同方向的特征,这就简化了系数之间的关系。基于学习的超分辨率重建算法具有整体的预测性,将非下采样Contourlet变换和基于学习的算法相结合,在一定程度上提高训练精度。针对指纹图像的实验证明该算法具有良好的性能,重建的图像纹理性细节信息较好,基本保持了原指纹图像的特征点,更接近于原始的高分辨率图像。     

基于指纹识别的虚拟硬盘研究

为防止机密数据不被窃取或篡改,本文提出一种基于指纹身份识别的虚拟硬盘文件加密存储方法。该方法是在Windows设备驱动程序的基础上,利用指纹识别技术和虚拟硬盘驱动程序,实现用户身份的唯一认证和文件的安全性管理。实验证明,该方法是一种安全、高效、实用的加密存储方法。     

基于ARM的QNMV指纹识别系统的研究

目前指纹识别技术正向着嵌入式和小型化的方向发展,搭建了基于ARM的指纹识别系统的硬件平台并对硬件进行了优化,研究了指纹识别的软件开发环境,给出了指纹识别系统的软件实现方框图和详细的指纹识别算法流程图;详细论述了全新的基于QNMV结构向量的指纹匹配算法,给出了算法优化后的一些测试数据,将指纹匹配算法与其他常见的算法进行了数据比对后,发现系统具有较好的性能指标:具有较低的误识率(FAR)和拒识率(FRR)、识别率(MRI)有了较大的提高、有效地缩短了匹配耗费时间(Time-Match);系统具有安全可靠、易于扩展、性价比高等优点。     

基于INS定位和WIFI指纹定位技术的无人机室内定位方法研究

针对无人机室内定位问题,提出了一种基于惯性导航系统（INS）和WIFI指纹定位技术的四旋翼无人机的室内定位方法。该方法首先利用WIFI模块测量的信号接收强度信息,根据WIFI指纹定位原理求出该定位时刻下的无人机位置;同时,利用惯性传感器信息计算出INS定位下的无人机位置,结合两种定位结果得出更为精确的位置。最后,通过实验验证了INS定位和WIFI指纹定位相结合的无人机室内定位方法的有效性,且该方法较两种单独定位方法的定位精度更高。     

PPV Nanotube Sensor Arrays for Explosives Identification by Excitation Wavelength Regulation

The development of sensitive materials for standard and improvised explosives is greatly significant to homeland security. In this paper, the phosphotungstate (NaPT) doped polyphenylene vinylene (PPV) nanotube arrays (NTAs), with excellent optical response, chemical stability, and larger specific surface area, are successfully fabricated by means of the “precursor film” infiltration method. The efficient charge carriers' separation of PPV NTAs can be achieved by doping NaPT to realize the photoelectric detection of explosive vapors. In addition, the identification of six explosives, including ammonium nitrate (AN), dinitrotoluence (DNT), picric acid (PA), p-nitrotoluene (PNT), triacetone triperoxide (TATP), and trinitrotoluene (TNT), can also be realized through the fingerprint atlas. Moreover, the adsorption energy and excited oscillator intensity has also been employed to explain the interaction between NaPT doped PPV nanotube arrays and various explosive molecules. Obviously, the NaPT doped PPV developed has the potential to be used as an explosive sensor.     

A dual-stimuli-responsive intelligent layered lanthanide hydroxide for application in information security and latent fingerprint identification

With the rapid changes in the field of information, the research and development of optical storage materials with high security and large storage capacity are particularly important in the development of contemporary society. However, conventional memory materials with static fluorescent outputs have the disadvantages of easy simulation and forgery, which limits their practical application in the protection of confidential information. In this research, a dual-stimuli-responsive intelligent fluorescent material based on Tb³⁺ and Eu³⁺ ions doped layered lanthanide hydroxide (LYH:Eu_xTb_1–xDPA) was fabricated, which can realize reversible multi-color luminescence conversion (from green to red) by varying the pH and temperature. Combined with the Morse code and security pattern, the multiple encryption and decryption of confidential information and anti-counterfeiting can also be realized. Therefore, the obtained intelligent fluorescent material has a great application prospect for information security. In addition, due to the excellent color tunability, the material can provide the possibility to obtain potential fingerprints with high contrast and no background interference on different color substrates. The unique dual-stimuli-responsive behavior of this material provides more ingenious design inspiration for the design of multi-color intelligent fluorescent devices.     

Semantic weak signal tracing

The weak signal concept according to Ansoff has the aim to advance strategic early warning. It enables to predict the appearance of events in advance that are relevant for an organization. An example is to predict the appearance of a new and relevant technology for a research organization. Existing approaches detect weak signals based on an environmental scanning procedure that considers textual information from the internet. This is because about 80% of all data in the internet are textual information. The texts are processed by a specific clustering approach where clusters that represent weak signals are identified. In contrast to these related approaches, we propose a new methodology that investigates a sequence of clusters measured at successive points in time. This enables to trace the development of weak signals over time and thus, it enables to identify relevant weak signal developments for organization’s decision making in strategic early warning environment.