KCl与NaCl在低盐固态法酱油发酵中的应用比较

对KCl与NaCl在低盐固态酱油发酵中的应用进行了比较研究。结果表明：用KCl代替NaCl，KCl的浓度要高于NaCl才能抑制发酵期间杂茵的污染，且使用KCl的发酵效果比NaCl要好。     

Substituted uracils as corrosion inhibitors for copper in 3% NaCl solution

Substituted uracils were tested as corrosion inhibitors of copper in 3% NaCl medium using electrochemical polarisation, impedance measurements and non-electrochemical techniques (weight loss, IR and UV-visible). This study permitted to follow the evolution of the inhibitory effect of the uracil derivatives, according to their substituents, on copper in 3% NaCl medium. Comparison of results showed that dithiouracil (DTUr) was the best inhibitor. The maximum inhibition efficiency reached 98% at 10⁻³ M. DTUr adsorbs on the copper surface according to the Frumkin isotherm model.     

Paste Residence Time in a Spouted Bed Dryer. II: Effect of Spout Operational Conditions

Residence time distributions for an aqueous solution of 10% sodium chloride in a spouted bed dryer of inert particles were determined using the stimulus-response technique. Glass and polyethylene beads with diameters 2.6 and 3.4 mm were used as inert bodies in a cylindrical column of 14.0 cm diameter and 60° conical base. The effects of inert bodies load, air, and paste flow rates on the mean residence times and RTD were determined following 2³ factorial designs. The RTD could be correlated to the perfect mixing cell model with R² varying from 0.8684 to 0.9815. The mean residence times in CSBD varied from 10.8 to 13.9 and 10.7 to 13.3 min for glass and polyethylene beads, respectively. For both inert particles, mean residence times increased with bed height and decreased with paste feed rates. Also, terms of interaction among the factors were significant in some cases, showing a complex behavior of paste residence times. Equations obtained by response surface regression could predict mean residence times on glass and polyethylene beads with deviations lower than ±10%.     

Corrosion Behavior of a Sputtered K38G Nanocrystalline Coating with a Solid NaCl Deposit in Wet Oxygen at 600 to 700°C

A nanocrystalline coating of K38G alloy was obtained by means of magnetron sputtering. The corrosion behavior of cast K38G alloy and its sputtered nanocrystalline coating with a solid NaCl deposit in dry air or wet oxygen at 600 and 700°C have been studied and compared. The results indicated that the mass gain of the coating is higher than that of the cast alloy at 600 and 700°C. Therefore, nanocrystallization reduced the corrosion resistance at these temperatures. Furthermore, the mass gains of the coating and the cast alloy with a NaCl deposit in wet oxygen were less than that with a NaCl deposit in dry air. The relevant corrosion mechanisms are discussed.     

氨荒酸盐抑制铜在NaCl溶液中腐蚀的电化学研究

通过电化学极化曲线和失重实验,研究了氨荒酸盐对铜在氯化钠溶液中的缓蚀性能,并与相应胺的缓蚀性能进行了对比。结果表明:氨荒酸盐对铜具有较好的缓蚀性能。     

钒冶炼焙烧添加剂选择研究

对小型钒冶炼厂焙烧工艺所用添加剂进行改进的可能性进行了探讨，研究了几种常用添加剂的焙烧条件，分析比较了其性能，提出用ＮａＣｌ－Ｎａ２ＣＯ３作焙烧添加剂替代ＮａＣｌ可大幅度减少大气污染，提高冶钒转化率；且不改变工艺流程，无需设备投资，具有较好的经济效益和环境效益。     

盐和水蒸气协同作用下TiAl合金腐蚀性能研究及其防护

研究了在700℃盐和水蒸气协同作用下TiAlNb合金的腐蚀行为以及溅射涂层对TiAlNb合金的防护作用。结果表明，在盐和水蒸气协同作用下，溅射TiAlCrAg涂层对TiAlNb合金具有一定的保护作用。盐和水蒸气协同作用加速了合金以及涂层的腐蚀。挥发性气体氯化物对α2相的循环作用是TiALNb合金腐蚀的主要原因。涂层中较少的α2相以及Laves相中较高的Cr含量是腐蚀有所减缓的主要原因。     

Na2SO4- and NaCl-Induced hot corrosion of six nickel-base superalloys

The short-time hot-corrosion behavior of six industrial nickel-base superalloys was investigated with static deposits of Na₂SO₄ or NaCl or both in still air. The oxidation kinetics and scale morphologies were measured with traditional laboratory techniques-thermobalance, metallography, electron microprobe, and x-ray analyses. Susceptibility to hot corrosion was found to be correlated to the type of scale produced during simple oxidation. Alloys forming an A1₂O₃ scale were found to be susceptible to Na₂SO₄ deposits, independent of their chromium content. The quantity of Na₂SO₄ deposit dictated the nature of the attack and, under certain conditions, the refractory element alloy additions appeared to play an essential role. Alloys containing Cr₂O₃ or TiO₂ in the simple oxidation scale proved to be sensitive to NaCl attack. Again, the severity of the attack within the susceptible alloy group was not related to the chromium or titanium content. Although less intensive than the Na₂SO₄ -induced hot corrosion, NaCl contaminations provoked extensive spalling. All of the hotcorrosion types encountered in this study were interpreted in the light of existing theories.Supported by the Délégation Générale à la Recherche Scientifique et Technique.     

Reaction process of monazite and bastnaesite mixed rare earth minerals calcined by CaO-NaCl-CaCl2

The decomposition reactions of monazite and bastnaesite mixed rare earth minerals calcined by CaO-NaCl-CaCl2 were studied by means of TG-DTA and XRD. The results show that the process of the minerals decomposed by CaO involves two steps. The first step occurs in the temperature range of 425-540 ℃, and the main reactions are bastnaesite decomposition, i.e. REOF reacts with CaO to produce RE2O3 and CaF2, and Ce2O3 is oxidized to CeO2. During this step, CaCO3 is formed at about 500 ℃. The second step takes place in the temperature range of 610-700 ℃, and the reactions are monazite decomposition into RE2O3, Ca5F（PO4）3 and Ca3（PO4）2 by CaO and CaF2. In this process, the decomposition ability is improved because CaO from CaCO3 decomposing has high chemical activity. In calcining process, the new formed Ca5F（PO4）3 restrains fluorine that can escape in form of gaseous compound. The decomposition ratio of the mixed rare earth minerals reaches 90.8% at 700 ℃.