捕收剂混合使用的协同效应与其浮选性能的相关关系研究

本文是关于捕收剂混含使用所产生的协同效应大小的相关因素和相关关系研究。研究结果表明,混用组合的协同效应大小与组合中各药浮选性能差之间存在相关关系,其浮选性能差以收率档次差与品位档次差的算术和表示,并命名为CS值。利用这一相关关系,可以大致预测新的混合用药组合的协同效应,从而为选择和设计新的药剂组合提供了一定的依据。     

A model based creep equation for 9Cr–1Mo–0·2V (P91 type) steel

Abstract

The isothermal constant stress creep tests data for a 9Cr–1Mo–0·2V (P91 type) steel were submitted for a phenomenological analysis in order to obtain the relevant creep equation for such steel. Namely, the minimum creep strain rate of P91 type steel cannot be described by the simple Arrhenius type power law constitutive model. The incorporation of the threshold stress concept in the analysis of creep data leads to a modified power law, which satisfactorily describes the creep behaviour of the examined P91 steel. However, the threshold stress is not a good material parameter, as it often varies with temperature and/or applied stress. This adds uncertainty to the extrapolation of the creep rates into ranges where experimental data are not available. Besides the fact that the physical foundation for a threshold stress is questionable from a scientific point of view, this is a serious practical limitation of the modified power law creep equation. The second creep equation proposed in the present paper is the improved stress dependent energy barrier model. The improvement of the standard model is based on two assumptions: first, on the hypothesis that the application of a stress also affects the energy barrier to be overcome when a local region transitions from the initial to the final state, and second, by applying a simple power function of stress instead of a hyperbolic sin function in the model based equation. The obtained value of stress exponent, n=5·5, is too high for entirely climb controlled creep. The apparent activation energy of approximately 510 to 545 kJ mol^?1, which is considerably higher than the activation energy for lattice diffusion, is the stress dependent activation energy of the slowest, dominant rate controlling process of the supposed multiple creep mechanisms.     

Fracture behaviour of radiolytically oxidised reactor core graphites: a view

Abstract

This paper provides a view on the fracture behaviour of polygranular graphites, used to moderate gas cooled nuclear reactors. Graphite is often cited as a classic example of a brittle material because failure, in tension, is associated with small strains. However, attempts to characterise the fracture behaviour of graphite by linear elastic fracture mechanics methods have been largely unsuccessful. Observations of graphite fracture show that elastic strain energy may be dissipated by the formation of distributed microcracks, and their formation may be responsible for non-linearity in the rising load–displacement curve. Progressive softening behaviour may also be observed in some specimens after the peak load. This type of load–displacement behaviour is a characteristic of quasi-brittle materials. Radiolytic oxidation increases the proportion of porosity within reactor core graphite so that the microstructure becomes increasingly skeletal. Consideration is given to the fracture of radiolytically oxidised graphite to support an argument for quasi-brittle behaviour.     

Pack formation and long term oxidation kinetics of TiAl3 coating on γ-TiAl

Abstract

The aim of this study is to produce microcracking free TiAl₃ coatings on γ-TiAl alloy by the pack cementation process and to determine the long-term oxidation kinetics and thermal stability of the coating at high temperatures. It was shown that microcracking free coatings could be prepared in the AlCl₃ activated packs containing 4 wt-%Al as the depositing source. The conditions required for the formation of a microcracking free coating are discussed in relation to the pack chemistry at high temperatures. The TiAl₃ coatings formed were oxidised in air for more than 6200 h, during which weight gains were measured at regular intervals. The major oxide in the scale was Al₂O₃. It was observed that a TiAl₂ phase zone formed in the subsurface of the scale as a result of preferential oxidation of Al in the TiAl₃ coating. It was found that a linear relationship existed between the weight gain and logarithm of time of oxidation at 800°C: Δm _t = k _lln(αt+ 1). The thermal stability of the coating was assessed by measuring the growth kinetics of the TiAl₂ interlayer at the boundary between the TiAl₃ coating and substrate, which was determined to be d^1·4 = 0·1t (d and t in μm and h respectively) at 800°C using the experimental data measured over a diffusion annealing period of more than 6200 h.     

Process model for strength of age hardenable aluminium alloy welds

Abstract

An existing process model for hardness prediction in age hardenable aluminium alloy welds is presented and analysed. One of the key criticisms of this model is that its derivation assumes softening is due to precipitate dissolution alone. The influence of precipitate coarsening has been determined by developing an equivalent model for softening owing to coarsening. It is shown that the experimentally derived master curves that form the basis of the model are capable of representing softening by a mixture of precipitate coarsening and dissolution. Methods to predict post-weld natural aging are discussed, and a new method is presented based on direct prediction of the Guinier–Preston zone fraction. The model has been applied to friction stir welding. Model predictions agree well with measured hardness profiles, and the sensitivity of the predictions to temperature is discussed.     

Macrostructural changes of polymer replicated open cell cordierite based foams upon sintering

Abstract

The goal of this work was to clarify the macrostructural changes that take place upon sintering of open cell cordierite based foams. A methodology, based on optical image analysis, was developed to assess the structure of open-cell foams, which allowed evaluating the macrostructure of both cordierite based foams obtained by the replication process and their polymeric templates. The parameters used to describe the structures were the size of the cell and the window, the window shape factor, the strut thickness and the volume fraction of the material. The experimental evidence gathered opened the way to understand the physical/chemical transformations involved in the polymer burnout and the ceramic sintering processes, as well as their influence on the ceramic final structure. The observed trends provide guidance for tailoring 'replicated' cordierite based foams, in view of the required application.     

Research on Laser Direct Deposition Process of Ti-6Al-4V Alloy

Laser direct deposition （LDD） of metallic components is an advanced technology of combining CAD/CAM （computer aided design/computer aided manufacturing）, high power laser, and rapid prototyping. This technology uses laser beam to melt the powders fed coaxiaUy into the molten pool by the laser beam to fabricate fuUy dense metallic components. The present article mainly studies the LDD of Ti-6Al-4V alloy, which can be used to fabricate aircraft components. The mechanical properties of the Ti-6Al-4V alloy, fabricated by LDD, are obtained using the tension test, and the oxygen content of used powders and deposited specimens are measured. In the present article, it can be seen that the mechanical properties obtained using this method are higher than the ones obtained by casting, and equal to those got by wrought anneal. One aircraft part has been made using the LDD process. Because of this aircraft part, with sophisticated shape, the effect of the laser scanning track on the internal soundness of the deposited part was discussed.     

Optimal configuration of blast furnace slag runner to reduce fluid flow stresses at wall using mathematical modelling

Abstract

A three-dimensional mathematical model was developed to predict the wall shear stresses due to flow of liquid slag in slag runner of 'G' blast furnace of Tata Steel under different conditions. The liquid slag flow in the slag runner was considered to be turbulent and incompressible. The model was developed for single phase, steady state and isothermal conditions. To this end, the Navier Stokes equations along with continuity and turbulence equations (standard k–? model) were simultaneously solved with appropriate boundary conditions at the associated physical boundaries of the calculation domain. Several configurations were numerically assessed with respect to reduced shear stresses on the wall of the slag runner to select the best one. Due to accelerating flow the operating heights of liquid slag (density 2800 kg m^–3 at 1500°C) within the slag runner for different configurations were estimated with the help of Bernoulli's and continuity equations and fixed before the computation. The different configurations comprised of three segments with different parameters of either elevation or radius of curvature. Relatively high shear stresses were numerically predicted at the joint area of second and third segments of the slag runner for all the configurations. The radius of curvature was found as the dominant factor to reduce the shear stress at the joint region.     

Classical thermodynamic approach to void nucleation in irradiated materials

Abstract

One of the major problems in building a future fusion power station is the development of suitable structural materials. These materials will be exposed to high energy neutron bombardment, with consequent changes in their mechanical properties – embrittlement, hardening and swelling, for example. A missing link in modelling these effects is an effective treatment of the nucleation of voids under irradiation. These voids are initially stabilised by transmutation helium but, once formed, grow by vacancy accumulation. In this paper, a quasi-chemical model is developed to calculate the entropy of a steel/helium system. Although a substantial contribution from quasi-chemical effects might be expected, the steady state concentrations of dissolved helium are found to be too low for such effects to manifest. The steady state concentration of dissolved helium is low in absolute terms, but the resulting supersaturation is very high, making it reasonable to assume that all available nucleation sites are instantaneously activated.