Influence of accelerated ageing on methacrylate‐based denture resins heterogeneity as viewed by ESR‐spin‐probe method

The electron‐spin‐resonance (ESR) spin‐probe method, was used to study the heterogeneity of denture resins based on poly(methyl methacrylate). Results for three resins processed by microwave energy, conventional curing and cold curing (depending on the curing procedure and exposed to ageing in various environmental conditions) were compared. All three cured resins were stored over the same time (1200 h) in distilled water at ambient temperature and in artificial saliva at 348 K. The temperature‐dependent ESR spectra of a spin probe dispersed in the denture resins are analyzed in terms of line‐shapes and line‐widths. The appearance of two spectral components was taken as an indication of resin heterogeneity. The results reveal that the cold‐cured resin has a lower local density in comparison with microwave and conventionally cured resin. The amount of residual monomer also contributes to the local motion of polymer segments. The change of denture resins exposed to ageing is influenced both by the structure of the original resin and the ageing conditions. Restricted motion of a spin probe incorporated into the acrylic resins exposed to accelerated ageing suggests additional crosslinking of polymer chains. The differences are observed for all the investigated resins, but the highest change is observed with the cold‐cured resin. The ESR results are accompanied by T_g and T_m measurements. Copyright © 2005 Society of Chemical Industry     

Dental amalgam – the effect of the technology of alloy powder preparation on the corrosion behaviour and the release of mercury

Dental amalgams are based on a broad spectrum of materials differing in their chemical composition, metallurgical treatment, and in the way the initial alloys powders are prepared. In addition to their chemical composition, amalgams based on various powders differ in both their microstructure and the amount of mercury needed for preparation. All these facts may affect electrochemical processes occurring during their interaction with oral fluids, and also mercury release. While verifying the effect of the technology used for the preparation of the high‐copper ternary alloy powder on the properties of resulting amalgams, this study aimed at the mechanism of their interaction with a model saliva solution as well as mercury release was included. Measurements were done in a model saliva solution using standard electrochemical methods and exposition measurements. The interaction of individual types of amalgams with artificial saliva did not reveal any significant differences. The free corrosion potential of all these amalgams in an aerated solution settled in the range of values in which tin oxidation, resulting in a layer of insoluble corrosion producsts, turned out to be the dominant anodic process. The rate of mercury release was the lowest for amalgams based on a gas‐atomized alloy. The highest rate of mercury release, and also its dependence on time, was exhibited by lathe‐cut powder based amalgam. In addition to different volume fraction of the Ag‐Hg phase and the level of its tin alloying, this different behaviour may be explained by differences in the rate at which a layer of tin corrosion products acting as a barrier to mercury release is formed.     

Bile acids as constituents for dental composites: in vitro cytotoxicity of (meth)acrylate and other ester derivatives of bile acids.

Methacrylic derivatives of bile acids have been synthesized for use as monomers in dental composites. Polymeric dental materials are known to leach cytotoxic unreacted monomers and degradation products. In this study, the in vitro cytotoxicity of bile acids and their derivatives towards 3T3 fibroblasts has been evaluated by colorimetric MTT assay and compared with that of the common dental monomers BisGMA, UDMA and TEGDMA. In general, the bile acids and their derivatives induced mitochondrial dysfunction at similar or higher concentrations than the commercial dental monomers. Certain monomers did not influence MTT response over their entire range of solubility.     

Distinct Expression Patterns of Cxcl12 in Mesenchymal Stem Cell Niches of Intact and Injured Rodent Teeth

Specific stem cell populations within dental mesenchymal tissues guarantee tooth homeostasis and regeneration throughout life. The decision between renewal and differentiation of stem cells is greatly influenced by interactions with stromal cells and extracellular matrix molecules that form the tissue specific stem cell niches. The Cxcl12 chemokine is a general marker of stromal cells and plays fundamental roles in the maintenance, mobilization and migration of stem cells. The aim of this study was to exploit Cxcl12-GFP transgenic mice to study the expression patterns of Cxcl12 in putative dental niches of intact and injured teeth. We showed that endothelial and stromal cells expressed Cxcl12 in the dental pulp tissue of both intact molars and incisors. Isolated non-endothelial Cxcl12⁺ dental pulp cells cultured in different conditions in vitro exhibited expression of both adipogenic and osteogenic markers, thus suggesting that these cells possess multipotent fates. Taken together, our results show that Cxcl12 is widely expressed in intact and injured teeth and highlight its importance as a key component of the various dental mesenchymal stem cell niches.     

Improvement of flexural bond strength of zirconia-resin cement by surface patterning using sub-nanosecond UV laser

Zirconia is a dental material that shows excellent biocompatibility and high strength in clinical applications. This study aims to evaluate the effects of ultrafast laser applications. The surface nanostructures were classified into three groups. Group 1 was generated using the burst mode, with three different distances between dots: 52 µm (Group 1a), 104 µm (Group 1b), and 156 µm (Group 1c). Group 2 was processed using the scanning mode configuration, with a set of parallel lines. Group 3 was also processed using this scanning configuration creating a set of square-shaped patterning. Group 4 was the control group. After the surface treatments, a pair of zirconia specimens was bonded end to end with resin cement. Flexural bond strength (FBS) test was applied in a universal test machine. Multiple comparisons were performed using a one-way analysis of variance and the Tukey's HSD test. All the samples that were treated with the laser showed higher FBS values than the untreated surface. Using the burst mode, preformed circular-shaped surface on an angle of 90⁰ at 52 µm distance (Group 1a) showed the highest FBS values among all groups (p < .05). Groups 2 and 3 had significantly higher values than 1b and 1c.     

In vivo aging of gutta‐percha dental cone

Gutta‐percha cone is the most widely used material for root canal filling. The in vivo aging of this cone focus on the degradation of its main organic component, trans‐1,4‐polyisoprene, was studied. Aged cones (25 samples) from 2 to 30 years of root canal filling were extracted from different patients in the occasion of retreatment by mechanical way. The information about the aging time was given by the patients. Gel‐permeation chromatography (GPC) and infrared spectroscopy (FTIR) were the analytical techniques used. Polyisoprene degrades with time of aging, but in a slow process. Decrease in polymer molar mass from 5.7 × 10⁵ to 1.7 × 10⁵ g/mol was observed in polyisoprene from cone after 30 years of root canal filling and inside a noninfected tooth. In tooth with caries and periodontal infection, the decrease in molar mass is higher (4.6 × 10⁴ g/mol in cone with 10 years of aging). The production of carbonyl and hydroxyl groups in the aged material indicates that the process is oxidative, even in closed teeth. In these cases, the oxygen could be provided from tissue fluid. The degradation mechanism is complex and depends on many factors, besides time of root canal filling. The dental problem caused by the aging could be the production and migration of cytotoxic substances to periodontal ligament and the reduction on the canal sealing property due to the polymer weight loss. Both of them could contribute to the root canal treatment failure. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:4082–4088, 2006     

牙科陶瓷配色方法和应用的初步研究

探讨牙科陶瓷配色的方法和机理，通过将钒锆黄、锆镨黄、锆铁红、铬铝锌红对牙科陶瓷进行配色。采用分光光度计测量了样品的L＊、a＊、b＊值和色差，并与VitaA2和ceramcoA2瓷粉对比，研究了样品色差与配方之间的关系。     

Influence of the Type and Method of Injection of Oxides Admixtures of Rare Earth Elements on Colour and other Properties of Dental Porcelain

A glassceramic material, which can be used in stomatology for production of dentinal layer of the dental crown multilayer coating, was received. In order to colour the material the admixtures of Tb and Ce compounds were used, as well as composite admixture representing a mixture of Ce, Nd and La oxides. It was demonstrated that the admixture of Tb oxide tones the material only when it is used together with Ce oxide. It was found that the more admixtures of rare earth elements oxides are contained in the sample composition, the higher the colour strength of the sintered material is. The wave length for the test samples is in the range of 600～650 nm, which corresponds to the yellow-orange and orange-red spectral range.     

口腔修复用Y-TZP陶瓷材料制备工艺研究

采用国产3Y-TZP亚微米粉体，通过双向模压结合等静压成形有效克服了条形试样的烧结弯曲，探讨了24h排胶工艺对预烧试样力学性能的影响，通过对预烧试样热膨胀曲线的测定、不同烧结温度试样力学性能和密度的比较及XRD定量分析确定了适宜的烧结工艺。结果表明，牙科支架用陶瓷，将预烧试样升至1550℃保温0．5h，排胶工艺对预烧试样的抗弯强度和断裂韧性并无显著影响，对于即可获得足够的抗弯强度，提高其断裂韧性。     

牙科着色玻璃渗透氧化铝陶瓷的性能研究

在1400℃下熔融2h制备4种定制颜色的着色渗透玻璃，并将玻璃于1120℃渗透入预烧结氧化铝多孔基体，采用分光光度计测定渗透后的透射比和颜色参数，渗透后的复合材料作三点弯曲强度及断裂韧性测试，断裂面进行扫描电镜观察。结果表明：玻璃渗透后铝瓷的颜色参数范围：L^＊：68．80-78．44，a^＊：1．32～4．75，b^＊：16．86-21．86。三点弯曲强度为（420-27．72）MPa，断裂韧性为（3．70-0．13）MPa·m^1/2。